Actuator Components

Forge Actuator Spring Retainer Top Brass- FMASR122

Forge

A replacement for the blue brass spring retainer found in both our 048 (T3) and 049 (T2) diaphragm actuators.This is not a direct replacement for the spring retainer found in our piston actuators.If you are unsure if this product is suitable for your application, please contact us.

£7.68£6.40 (ex. VAT)

Forge Actuator Rods - Various Lengths

Forge

Actuator Rod - Please select the rod you require using the options above (Note: We sell both M6 and 1/4UNF threaded rods).All of the above options are for straight rods and ones which we frequently stock. If you require a specific rod that is not listed above, such as a bent rod or a length not listed, please contact us directly.If you are unsure if this product is suitable for your application, please contact us.

£9.22£7.68 (ex. VAT)

Forge T3 Actuator Single Spring - FMAS048

Forge

A single replacement spring for your Forge Motorsport Actuator. This is the T3, large body type spring (048).T3 048 (Big) Actuator Springs:Green - 10 psi (0.7 bar)Yellow - 12.5 psi (0.9 bar)Blue - 17 psi (1.2 bar)Red - 18 psi (1.3 bar)If you are unsure if this product is suitable for your application, please contact us.

£15.35£12.79 (ex. VAT)

Forge T2 Actuator Single Spring - FMAS049

Forge

A single replacement spring for your Forge Motorsport Actuator. This is the T2, small body type spring (049).The spring colour codes and their running pressures are as listed below.T2 049 (Small) Actuator Springs:Green 10 psi (0.7 bar)Purple - 13 psi (0.9 bar)Yellow 15 psi (1.0 bar)Blue 18 psi (1.2 bar)Red 20 psi (1.4 bar)If you are unsure if this product is suitable for your application, please contact us.

£15.35£12.79 (ex. VAT)

Forge Actuator Short Turn Buckle - FMTBU2

Forge

This turnbuckle will fit our range of actuators. It has an internal 1/4 UNF thread with a length of 35mm (Measured from the center of the hole to the end of the turnbuckle).Please select in the options above, the size of the hole required.If you are unsure if this product is suitable for your application, please contact us.

£17.06£14.22 (ex. VAT)

Forge Actuator Turn Buckle - FMTBU3

Forge

This turnbuckle will fit many application with a 6.1mm diameter hole and a rod length of 75mm (Measured from the center of the hole to the end of the turnbuckle). It has an internal 1/4 UNF thread with a length of 52mm.If you are unsure if this product is suitable for your application, please contact us.

£17.06£14.22 (ex. VAT)

Forge Actuator Turn Buckle - FMTBU4

Forge

This turnbuckle will fit our range of actuators. It has an internal 1/4 UNF thread. The pin diameter is 7.9mm.Please select the turnbuckle length (Measured from the center of the pin, to the end of the turnbuckle) in the options above.If you are unsure if this product is suitable for your application, please contact us.

£17.06£14.22 (ex. VAT)

Forge Actuator Long Turn Buckle - FMTBU1

Forge

This turnbuckle will fit our range of actuators. It has an internal 1/4 UNF thread with a length of 52mm (Measured from the center of the hole to the end of the turnbuckle).Please select in the options above, the size of the hole required.If you are unsure if this product is suitable for your application, please contact us.

£17.06£14.22 (ex. VAT)

Forge 048 Service Kit

Forge

If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular intervals, you can ensure that your Forge Motorsport product will last a lifetime.The larger 048 actuator service kit contains a replacement diaphragm and blue spring retaining dome.

£17.54£14.62 (ex. VAT)

Forge 048 Service Kit

If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular inter...
£17.54

Forge FMAC049 or T2 Replacement Diaphragm

Forge

A replacement diaphragm for your Forge Motorsport actuator. Our actuators have two body sizes. This diaphragm is for the smaller body, the (049) series (T2), with a diaphragm diameter of approximately 63mm.If you are unsure if this product is suitable for your application, please contact us.

£17.54£14.62 (ex. VAT)

Forge FMAC048 or T3 Replacement Diaphragm

Forge

A replacement diaphragm for your Forge Motorsport actuator. Our actuators have two body sizes. This diaphragm is for the larger body, the (048) series (T3), with a diaphragm diameter of approximately 80mm.If you are unsure if this product is suitable for your application, please contact us.

£22.85£19.04 (ex. VAT)

Forge 049 Diaphragm Actuator Service Kit

Forge

If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular intervals, you can ensure that your Forge Motorsport product will last a lifetime.The diaphragm actuator service kit contains a replacement diaphragm, vacuum port, and blue spring retaining dome.

£22.86£19.05 (ex. VAT)

Forge Piston Actuator Service Kit

Forge

If you wish to rebuild or service your Forge Motorsport actuator, we can offer a kit of replacement parts. By servicing your actuator at regular intervals, you can ensure that your Forge Motorsport product will last a lifetime.The piston actuator kit includes replacement piston, o-rings, vacuum port, blue spring retaining washer, and a pot of Mobil grease

£23.39£19.49 (ex. VAT)

Forge Spring Tuning Kit for Turbo Actuators

Forge

Now you can fine tune your turbo actuator to the exact needs of your engine with this complete tuning kit.In your actuator tuning kit, you will find four or five springs (dependent on your actuator) and the associated spring retainer. The strongest spring is the red, followed by the blue, yellow and finally the green which is the weakest.Please select from the options above if you require this kit for an 048 or 049 actuator. The 048 actuators are those with a big body, the 049 actuators are those with a standard size body.Piston 049 acuators and diaphragm 049 actuators use the same springs. The spring colour codes and their running pressures are as listed below.T2 049 (Small) Actuator Springs (Both Piston and Diaphragm Type 049):Green 10 psi (0.7 bar)Purple - 13 psi (0.9 bar)Yellow 15 psi (1.0 bar)Blue 18 psi (1.2 bar)Red 20 psi (1.4 bar)T3 048 (Big) Actuator Springs:Green - 10 psi (0.7 bar)Yellow - 12.5 psi (0.9 bar)Blue - 17 psi (1.2 bar)Red - 18 psi (1.3 bar)We normally supply our actuators, unless requested differently, with a spring that will match the tension of the manufacturer’s original fitment valve. However, as many owners undertake tuning modifications some may wish to re-tune the actuator characteristics to suit a given application.Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this productThese kits are NOT suitable for our Diesel actuator for Garrett VNT turbos.If you are unsure if this product is suitable for your application, please contact us. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*

£42.44£35.37 (ex. VAT)