Airtec / Autospecialist Products - Fiesta MK7 ST180/ST100 inc 1.0 Ecoboost

QUICK VIEW

AIRTEC Intercooler Stencil

Airtec / Autospecialist

Is your intercooler looking a bit run down?AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler.Stencils available for all AIRTEC intercoolers.Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1)Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane.Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3)Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

£15.75£13.13 (ex. VAT)

AIRTEC Intercooler Stencil

Is your intercooler looking a bit run down?AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler.Stencils available...
£15.75
View details
QUICK VIEW

AIRTEC Fiesta MK7/8 Race Tow Strap Kit

Airtec / Autospecialist

Fits:Fiesta Mk7/8Finally an off the shelf way to fit a Race Tow Strap to your Fiesta MK7, no bumper removal and then never using it because your too scared it may crack your bumper due to being bolted in an incorrect towing position In Fords wisdom they made the original towing eye thread custom, this meant we have to make a tool just to cut the thread on the adapter, then we added a flat section so you can tighten it with a 19mm spannerThread available on its own, or with the optional tow strap.

£27.51£22.93 (ex. VAT)
QUICK VIEW

AS Bonnet Spacer Blocks for MK7 Fiesta / MK2 Focus

Airtec / Autospecialist

Fits:Fiesta MK7 and 7.5 including ST180MK2 FocusAfter being very popular for other Ford models, Auto Specialists are pleased to announce their bonnet spacer kitThe spacers raise the rear of the bonnet up by 23mm and can be fitted within 30 minutes with special inverted bolts.HOW DO THEY FIT? Lift the bonnet up and put a soft cloth under the bottom corner of the bonnet and then one side at a time remove the 2 x 10mm bolts attaching the bonnet hinge to the bonnet, discard the old bolts and install the billet spacer block and use new inverted bolts to secure. It's that easy!A great low cost way to change the look of your Fiesta and release high under bonnet temperatures for fast road or track use.2 x Billet spacers and complete with stainless fixings.

£38.54£32.12 (ex. VAT)
QUICK VIEW

AIRTEC Motorsport Billet Quick Shift Fiesta ST180

Airtec / Autospecialist

Fits:Fiesta ST180Reduce your stock shift throws with two different positions, ranging from 15% or 25%. Offering 2-positions truly allows the user more options to fine tune their shift throws!With a quick and easy installation process the stock shift weight does not need to be removed. This saves time and makes the installation quick and easy.Made from CNC machined aluminum with engraved AS Auto Specialists logoAll hardware is 100% stainless steel including the ball stud2-position adjustable between (15% or 25%) reductionCompletely reversibleInstalls in approx. 15 minutesSimple DIY fitting:Remove gear selector cable from original shifter, using long nose pliers or mole gripsInstall top section of new short shifter which will locate it's self due to cut out underneath top sectionThen install lower section and new bolts and tighten, simply reconnect gear selector cable15% (Lower hole) or 25% (Top hole).Please note: due to stock levels logo may vary (AIRTEC or AS logo)

£49.56£41.30 (ex. VAT)
QUICK VIEW

AIRTEC Motorsport Front Turbo Hard Pipe for Fiesta 1.0 EcoBoost

Airtec / Autospecialist

Fits:all fiesta 1.0 EcoBoosts, 100PS, 125PS, 135PS, 140PS including Limited, Red & Black & 164 modelsAuto Specialists performance high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added.Made with high quality stainless steel. The Auto Specialists performance turbo hard pipe will improve airflow and turbo noise.Features:High quality hard pipeEasy to fit

£52.37£43.64 (ex. VAT)
QUICK VIEW

AIRTEC Motorsport Alloy Top Induction Pipe for Fiesta 1.0 EcoBoost

Airtec / Autospecialist

Fits:Fiesta Mk7/7.5 1.0 Eco Boost 100 ps, 125 ps, 140psFiesta MK8 1.0 & ST-LineHelp your 1.0 Eco boost get a much air into the engine as possible!Transform your 1.0 Eco Boost engine bay, larger diameter pipe-work combined with AS performance induction kit means louder waste-gate chatter, similar to Focus RS Mk2 FeaturesSwaged ends so induction pipes can't blow offHighly polished mandrel bent alloy pipe workUses original fixing pointsFocus 1.0 engine cover can still be fittedIncreased induction noise 'AS Induction kit recommended'

£104.68£87.23 (ex. VAT)
QUICK VIEW

AIRTEC Motorsport Fiesta MK7 1.0 EcoBoost gauge kit

Airtec / Autospecialist

Fits:Fiesta 1.0 EcoboostThe AIRTEC Motorsport Fiesta MK7 boost gauge kit, supplied with Turbosmart Boost Gauge in PSI or BAR.A simple modification with an OEM look.Comes complete with fitting guide for a quick & simple DIY install.Kit includes:Turbosmart backlit boost gauge (Bar or PSI)Gauge securing ringVacuum hoseBracket and boltsCNC vacuum take off (Fits onto inlet manifold)

£110.20£91.83 (ex. VAT)
QUICK VIEW

AIRTEC Motorsport Brake Cooling Guides for Fiesta MK7

Airtec / Autospecialist

Fits:Fiesta MK7Designed to stop brake fade and spongy pedal. AIRTEC Motorsport brake cooling guide forces air towards the brakes and calliper when driving, simply mounts to the car using pre-existing holes for a quick and easy install. There is no need to remove fog lights or drill any holes.

£132.30£110.25 (ex. VAT)
QUICK VIEW

AIRTEC Stage 2 Induction Kit for 1.0-litre EcoBoost 100ps, 125ps & 140ps

Airtec / Autospecialist

Fits:Fiesta MK7 1.0L 100ps, 125ps & new 140ps EcoBoostThe new design Stage 2 induction kit that works perfectly!Expect to see gains of 5-10bhp compared to the original air box.Enhanced induction sound, great looks and loud recirculation / dump valve noise on let off.Features:Removes ugly original plastic & restrictive air boxAdds power and torque More responsive and exciting driving experienceEnhanced induction sound and turbo recirculation noiseFree flowing air filter & optional K&N dry charger filter coverCNC MAF sensor boss with AS engraved logoPowder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filterCold feed pipe, secure to bottom of heat shield and secures to lower boost hose, or attach to front lower bumperAdds style to your engine bayEasy fitting, takes less than 15-20 minutes to installIt's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty).A simple modification that transforms the look of your engine bay.

£139.95£116.63 (ex. VAT)
QUICK VIEW

AIRTEC Stage 1 Intercooler Upgrade for Fiesta ST180 EcoBoost

Airtec / Autospecialist

Fits:Fiesta ST 180Fiesta ST 200The Stage1 ST180 EcoBoost intercooler features our proven race quality Bar 'n' Plate core, this core has always proved to outperform it's lighter weight Tube and Fin competitor. The new ST Fiesta is a great car and why not make it even better and fit the best, fit AIRTEC. Fast Ford magazine intercooler test - measured in degrees CStandard:Run 1 Intake temp turbo into intercooler 140 out of intercooler into engine 85Run 2 Intake temp turbo into intercooler 131 out of intercooler into engine 92Run 3 Intake temp turbo into intercooler 140 out of intercooler into engine 97 AIRTEC:Run 1 Intake temp turbo into intercooler 140 out of intercooler into engine 31Run 2 Intake temp turbo into intercooler 150 out of intercooler into engine 38Run 3 Intake temp turbo into intercooler 152 out of intercooler into engine 39AIRTEC Front mount Intercooler Features:1 x huge 70mm core Intercooler with flowed cast end tanks, this means less welding and a stronger intercooler (Ford intercooler 50mm core)Come with full fitting instructionsNo cutting or drilling with this kitLogos have been put onto flowed cast end tanksUnbeatable value for moneyProven power increases for fast road & trackAvailable in Satin Black or Natural SilverAIRTEC 3 year unlimited mileage warrantyFitting will take 1-2 hours depending on mechanical skillProven to handle 250BHP

£249.95£208.29 (ex. VAT)
QUICK VIEW

AIRTEC Motorsport Big Boost Pipe Kit for ST180

Airtec / Autospecialist

Fits:Fiesta ST180Fiesta ST200The kit includes: 2 hard pipes, 4 Pro Hose silicone hoses & jubilee clips.This kit is designed for the modified fiesta ST 180. All pipes have swayed  ends to stop the pipes blowing off.Available with or without symposer take off.  2.5" bore pipework.Please note: NEW revised hot side for 2018.Now only supplies WITHOUT SYMPOSER take off.AIRTEC part no: ATMSFO17

£275.57£229.64 (ex. VAT)
QUICK VIEW

AIRTEC Stage 1 Intercooler Upgrade for Fiesta 1.0 EcoBoost

Airtec / Autospecialist

Fits:Fiesta 100PS / 125PS / 135PS and 140PS (Red and Black) modelsAIRTEC front mount intercooler features:Single pass 50mm core intercooler with flowed end tanks, this means less welding and a stronger intercoolerComes with full fitting instructions & pipe work No cutting bumper with our intercooler kit Unbeatable value for moneyAIRTEC 3 year unlimited mileage warrantyFitting will take 1-2 hours depending on mechanical skillProven vertical 50mm core, runs top to bottom of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better.Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum Airflow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more airflow to the intercooler, we suggest to do this whilst fitting.Please note: pipe work only available in silver

£303.19£252.66 (ex. VAT)
QUICK VIEW

AIRTEC Stage 3 Induction Kit for ST180/ST200

Airtec / Autospecialist

Fits:Fiesta ST180Fiesta ST200The new design Stage 3 induction kit that works perfectly with the standard Fiesta ST180.Enhanced induction sound, great looks and loud recirculation dump valve noise on let off.Features:Removes ugly original plastic & restrictive air boxReplaces bigger silicone hoses with hard pipesAdds more power and torque More responsive and exciting driving experienceEnhanced induction sound and turbo recirculation noise (dump valve 'psssh')Free flowing air filter & optional K&N dry charger filter coverCNC MAF sensor boss with AS engraved logoPowder coated alloy heat-shieldAdds style to your ST engine bayEasy fitting, takes less than 15-20 minutes to installConclusion: it's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty)As good as it gets. Comes with 24 month warranty 'conditions apply'

£325.24£271.03 (ex. VAT)
QUICK VIEW

AIRTEC Motorsport Fiesta ST180 Oil Cooler Kit

Airtec / Autospecialist

Fits:Fiesta ST180AIRTEC Motorsport are proud to offer the oil cooler kit for the Fiesta ST 180Long overdue but its been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality.Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters.Kit Includes.13 row high performance AIRTEC motorsport oil coolerAeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hoseBillets anodised Black hose line separators x 4Gearbox mounted hose securing bracket finished in Pro-Series BlackDesigned to fit with AIRTEC stage 3 intercooler & supplied with a bracket for cars running standard or other aftermarket intercooler!Todays high performance vehicles pack a lot of power in a smaller package.In order to save both weight and space, the typical OEM cooling system is designed for normal driving conditions.When driven hard for extended periods, the cooling system may prove less than adequate.AIRTEC offers the solution to marginal cooling systemsrace proven lightweight and efficient oil coolers designed to fit in the smallest practical space.

£325.24£271.03 (ex. VAT)
QUICK VIEW

AIRTEC Stage 2 Intercooler Upgrade for Fiesta 1.0 EcoBoost

Airtec / Autospecialist

Fits with the following bumpers:Standard Zetec S bumperNew style RS bumperFits:Fiesta 100PS / 125PS / 135PS and 140PS (Red and Black) modelsAIRTEC Front mount Intercooler Features :1 x Twin pass huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger IntercoolerComes with full fitting instructions & pipe work No cutting bumper with our intercooler kit Un-Beatable value for moneyAIRTEC 3 year unlimited mileage warrantyFitting will take 1-2 hours depending on mechanical skillProven horizontal 60mm core, runs left to right of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better.Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum Airflow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more Airflow to the intercooler, we suggest to do this whilst fitting.Proven and tested at Collins Performance with great results:Standard intercooler:62 DegreesAIRTEC Stage 1 Intercooler:44 DegreesAIRTEC Stage 2 intercooler:20 DegreesSome minor trimming may be required to the lower grill.Please note: pipe work only available in silver.Approximate dimensions:Thickness 60mmWidth 525mmHeight 378mmAIRTEC Intercooler Volume Capacity (the amount of charged air that the intercooler can hold) is 3.45 litres

£384.77£320.64 (ex. VAT)
QUICK VIEW

AIRTEC Intercooler Upgrade for Fiesta MK7 1.6 Diesel (pre-facelift)

Airtec / Autospecialist

Fits:Fiesta MK7 1.6 Diesel PRE-FACELIFTAIRTEC Front mount Intercooler Features 1 x single pass 50mm core Intercooler with flowed end tanks, this means less welding and a stronger IntercoolerComes with full fitting instructions & pipe work Un-Beatable value for moneyAIRTEC 3 year unlimited mileage warrantyFitting will take 1-2 hours depending on mechanical skillWill require some small cutting of the bumper and grill area.Proven vertical 50mm core, runs top to bottom of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better.Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum Airflow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more Airflow to the intercooler, we suggest to do this whilst fitting.

£384.77£320.64 (ex. VAT)
QUICK VIEW

AIRTEC Stage 3 Intercooler Upgrade for Fiesta ST180 / ST200 EcoBoost

Airtec / Autospecialist

AIRTEC has now taken the intercooler on the ST180 to a whole new level, with the step core design offering a 85mm thick lower section and a 40mm thick upper section The Double DeckerThe intercooler has been designed for cars running hybrid turbos and big turbo conversions where fitted, however still produces fantastic gains on Stage 2 carsIf the ECU sees over 50 degrees it will back power off for engine safety, the AIRTEC intercooler keeps the temps low enough so you keep all your power.Approximate Dimensions:Height  350mmWidth 1000mm approx.Thickness  bottom core 85mm 125mm height top core 40mm 225mm height total height 350mmWill fit Fiesta ST 200Registered Design Right number: 6023251Now only available in Pro-Series BlackAIRTEC Part No: ATINTFO26

£576.45£480.38 (ex. VAT)