Forge Horseshoe Clip
A plastic Horseshoe clip used in various Forge boost gauge fitting kits, PCV deletes, and valve kits.This is a genuine VAG part that will fit Audi, VW, Seat, and Skoda.
£2.81£2.34 (ex. VAT)Search our products below
A plastic Horseshoe clip used in various Forge boost gauge fitting kits, PCV deletes, and valve kits.This is a genuine VAG part that will fit Audi, VW, Seat, and Skoda.
£2.81£2.34 (ex. VAT)This is a Boost Tap Manifold for VAG 3.0 Supercharged engine as found in 2010 onwards S4 S5 Q5 A6 A7 3.0T. It will allow connection of a boost gauge to these engines with the minimum of effort.
£12.60£10.50 (ex. VAT)The Forge Motorsport boost tap for the Audi RS3 (8V) allows for fitment of a boost gauge or indeed anything that needs a boost signal, e.g. a water meth pressure sensor, to the 2.5 TFSI engine. Previously we were able to obtain a boost reference from under the MAP sensor, but due to changes in the manifold design, this is no longer possible.This new boost tap can be installed in under 10 minutes and is fully reversible should you ever wish to remove it. Comes complete with an installation kit, and full instructions.*Will not fit Engine code DAZA (TTRS 2017- and RS3 Facelift 2017-)
£12.60£10.50 (ex. VAT)Audi 2.0T FFV Boost Gauge Fitting KitAnother unique design by Forge Motorsport. This boost tap will fit the FFV (Flexible Fuel Vehicles) including the Audi A4, A5 and Q5.This part allows easy fitment of a boost gauge, water meth pressure sensor or a dump valve to the 2.0T engine.The boost tap itself can be installed without tools in under 10 minutes and is fully reversible should you ever wish to remove it. Complete with installation instructions.This is also referred to as the Audi B8.5 boost tap but will not fit all B8.5 vehicles, to further help identify if this will fit the 2.0T you have, please see the engine bay picture. Application List2012-on Audi A4,A5 and Q5 with the 2.0 petrol turbo engineThe part fits many engines within these years.They are ‘FFV’ or ‘Flexible Fuel Vehicles’.To double check, all of the FFV’s have a sticker inside the petrol cap saying ‘E85 compatible’ . They should also have ‘E85/Gasoline’ written on the petrol cap itself. The final check is that all the FFV’s have a metal intake manifold rather than plastic.
£12.60£10.50 (ex. VAT)A simple way to tap into your manifold on the N14 and N18 engine found in the Mini Cooper S Turbo, Citroen DS3 1.6 Turbo, Peugeot 207 GTi, Peugeot 208 GTi and Peugeot RCZ THP156 and THP200. This adaptor utilises the (MAP) pressure sensor on the inlet manifold under the airbox.Simply remove the existing sensor, fit our adaptor and refit the original sensor into our adaptor. You will then have a vacuum / boost connection suitable for 4mm tube or similar that can be used to install a boost gauge
£37.07£30.89 (ex. VAT)Forge Motorsport Boost Tap Kit for 1.5 TSI Engines and late 1.4 TSI engine from 2018 onwards and the Ford Focus ST280This adaptor installs inbetween the intake manifold vacuum pipe and the vacuum hose coming from itA simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible.In the Box:AdapterSmall Forge StickerCable ties (x10)3 metres of 4mm Vacuum HoseE Clip
£48.92£40.77 (ex. VAT)This adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment. Vacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.Compatible with the following BMW MAP sensors: 13627551429 13627585493 13627599042BMW Compatible Vehicles:1' F20 (07/2010 — 02/2015)1' F20 LCI (05/2014 — 06/2016)1' F21 (07/2010 — 02/2015)1' F21 LCI (09/2014 — 06/2016)2' F22 (10/2012 — 06/2016)2' F87 M2 LCI (10/2016 — 12/2018)2' F23 (04/2014 — 06/2016)3' F30 (02/2011 — 01/2016)3' F30 LCI (10/2014 — 10/2018)3' F80 M3 (04/2012 — 06/2015)3' F80 M3 LCI (01/2015 — 10/2018)3' F31 (07/2011 — 06/2015)3' F31 LCI (12/2014 — 06/2016)3' F34 GT (07/2012 — 06/2016)3' F35 (06/2011 — 08/2015)3' F35 LCI (01/2015 — 08/2016)4' F32 (11/2012 — 01/2017)4' F82 M4 (02/2013 — 02/2017)4' F82 M4 LCI (05/2016 — 12/2018)4' F33 (03/2013 — 02/2017)4' F83 M4 (06/2013 — 02/2017)4' F83 M4 LCI (05/2016 — 12/2018)4' F36 Gran Coupé (07/2013 — 12/2016)5' F07 GT LCI (08/2012 — 02/2017)5' F10 (06/2010 — 10/2016)5' F10 LCI (10/2012 — 10/2016)5' F11 (06/2010 — 06/2013)5' F11 LCI (10/2012 — 02/2017)5' F18 (03/2011 — 08/2013)5' F18 LCI (10/2012 — 04/2017)5' F90 M5 (01/2016 — 12/2018)6' F06 Gran Coupé (10/2011 — 02/2015)6' F06 Gran Coupé LCI (09/2014 — 09/2018)6' F12 (03/2011 — 02/2015)6' F12 LCI (05/2014 — 05/2018)6' F13 (03/2011 — 02/2015)6' F13 LCI (06/2014 — 10/2017)X1 E84 (04/2009 — 12/2015)X3 F25 (02/2011 — 08/2017)X4 F26 (05/2013 — 03/2018)X5 F15 (10/2014 — 06/2018)X5 M F85 (04/2013 — 06/2018)X6 F16 (11/2014 — 12/2018)X6 M F86 (10/2013 — 12/2018)Z4 E89 (01/2011 — 08/2016)MS BMW Motorsport ( — )In the Box:Small Forge Sticker3.5mm Black Vac PortCable ties (x10)Fixing screws (x2)4mm Vacuum Hose (x3m)
£50.69£42.24 (ex. VAT)This adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost). Simply remove the existing sensor, fit the Forge Motorsport adaptor and refit the original sensor to the adaptor. This provides a take-off port to connect a vacuum operated valve or a boost gauge without having to cut into any original equipment. Vacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.Compatible with the following MAP sensors:0 281 002 9960 281 002 5665521929555209194
£50.69£42.24 (ex. VAT)Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicone hose and fitting instructions are supplied and the application is fully reversible.In the Box:Boost Adapter4mm Vacuum HoseCork gasketFixing ScrewsCable ties (x10)Small Forge Sticker Compatible Vehicles Engine Codes: PR-TJ4 and DKRFitting time: 1 hour
£50.69£42.24 (ex. VAT)Forge Motorsport Boost Tap Kit for 1.2 TSI Engines with code CBZA, CBZB or CBZC. This adaptor installs between the boost (MAP) sensor and the intake manifold.A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible.In the Box:Small Forge Sticker3.5mm Vac PortCable ties (x10)Self tapping screws (x2)Cap head bolts (x2)Cork gasket4mm Vacuum Hose
£50.69£42.24 (ex. VAT)This adaptor plate installs between the boost (MAP) sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection to a boost gauge. In The Box:1 x Vacuum Tap2 x M6 x 35 Socket Cap Bolts2 x M5 x 35 Self Tapper Screws1 x Forge Sticker
£50.69£42.24 (ex. VAT)The Forge Motorsport boost tap for the 2015 1.2 TSI engine codes CJZA, CJZC, CJZD, CYVB as found in the Skoda Fabia, Skoda Octavia, VW Golf, VW Polo, Audi A1, Audi A3, Seat Ibiza and Seat Leon. It allows fitment of a boost gauge if you wish to monitor boost levels from within the cabin using boost gauge, or if you need a pressure take off for another reason e.g. a boost pressure activated water injection system.If you are purchasing this kit for the 1.2/1.4 TSI platform you will also need to purchase the ball extension, this raises the airbox to allow for the fitment of the boost tap.A fitting kit comprising of a length of vacuum hose, cable ties and a gasket is supplied with the tap together with full fitting instructions.
£50.69£42.24 (ex. VAT)Boost gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines found in many new vehicles including the Golf Mk7, Audi S1, Audi S3 (8V chassis), Seat Leon Cupra 280 etc… This adaptor installs between the boost (MAP) sensor and the inlet manifold.Simple 5 minute install to give you a vacuum / boost connection suitable for installing a boost gauge or dump valve.Our design allows you to refit the original engine cover after installation and is totally reversible.
£51.42£42.85 (ex. VAT)Forge Motorsport Boost Tap for the Mini F56 and F55. The adaptor plate is installed between the boost (MAP) sensor and the intake manifold.A simple solution for fitting a boost gauge without having to cut into any original equipment. Simple to fit using the existing MAP screw, hardware and fitting instructions which are supplied and the application is fully reversible. OEM T-Map Sensor Part Number: 13628637899 In The Box:x1 Forge Motorsport Mini F56 & F55 Boost Tapx1 M6x16 Cap Head Boltx1 3 meter length of 4mm Vacuum Hosex10 Cable Tiesx1 Forge Motorsport Sticker
£51.42£42.85 (ex. VAT)Forge Motorsport Boost Tap for the Ford Mustang 2.3 Ecoboost and the Mk3 Focus RS. This adaptor plate is installed between the boost (MAP) sensor and the mounting surface. This allows a tap to run a vacuum operated valve or for connection to a boost gauge. In the box:1 x Vacuum tap1 x Allen Cap Bolt10 x Cable Ties1 x 3000mm of 4mm Vacuum Tube
£51.42£42.85 (ex. VAT)Boost Tap for Ford Focust ST 180 (Mk7). This adaptor plate installs between the boost (MAP) sensor and mounting surface. This allows a tap to run a vacuum operated valve or for connection to a boost gauge.When running this tap you are also able to retain your original engine cover.In the box:1 x Vacuum tap1 x M6x20 Allen Cap Bolt10 x Cable Ties1 x 2000mm of 4mm Vacuum Tube
£54.01£45.01 (ex. VAT)For all those wishing to install a boost gauge to their 2.0 litre FSiT engines (suitable for all VAG TSI and FSI turbo engines), we have a CNC inline take off, which is installed on to the inlet manifold, and allows up to three connections to be made if required.These are available in Black anodised finish only. In The Box:1 x 1mm Vacuum Port1 x 2mm Vacuum Port1 x 3mm Vacuum Port8 x Cable Ties1 x Horse Shoe Clip3 x M6 x 6 Grub Screws1 x 2000mm x 4mm Vacuum Tube1 x Forge Sticker
£54.01£45.01 (ex. VAT)Forge Motorsport Boost Tap Kit for Audi TTRS 8S and Audi RS3 (DAZA Engine Codes) as well as BMW's with part number 13627843531The adaptor in this kit is machined from solid billet and offers two additional ports. One port including pipe fitting can be used for a dump valve or boost gauge to be fitted, the second port will accept a 1/8” NPT fitting which can be used for water meth.Two plugs are included allowing one or both ports to be blanked off at any time. No modifications are required to OE parts making the install fully reversible. Hardware, including fitting instructions are supplied.In the Box:Boost tap adapterPipe fittings2x Plugs
£105.25£87.71 (ex. VAT)