Brake Pads

Cosworth StreetMaster Rear Brake Pads BMW M3 E36, Z3, 5 Series

Cosworth

Cosworth CFS3026 Rear Brake Pads BMW M3 E36, Z3, 5 Series, 7 SeriesHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£30.00£25.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads BMW M3 E46, Z4, Z8

Cosworth

Cosworth CFS3027 Rear Brake Pads BMW M3 E46, BMW Z4, Z8, 7 SeriesHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£30.00£25.00 (ex. VAT)

Cosworth StreetMaster Rear Pads Mazda MX5 NC 2006+

Cosworth

Cosworth CFS3015 Rear Brake Pads Mazda MX5/Roadster NC 2006+ 1.8L/2.0L High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in

£30.00£25.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads VAG VW Golf, Octavia, A3

Cosworth

Cosworth CFS3037 Rear Brake Pads VAG, Volkswagen Golf, Octavia, Audi A3 etcHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in

£30.00£25.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads VAG, Audi TT, VW Golf & Scirocco

Cosworth

Cosworth CFS3031 Rear Brake Pads VAG Audi TT, Volkswagen Golf, Scirocco & More!High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in

£30.00£25.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads VAG, VW Golf, Audi TT, A3

Cosworth

Cosworth CFS3034 Front Brake Pads Volkswagen Golf, Audi TT, Audi A3 & More High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£33.60£28.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads VAG Golf, Leon, Octavia, A3

Cosworth

Cosworth CFS3029 Rear Brake Pads VAG VW Golf, Seat Leon, Octavia, Audi A3 & More!High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in

£33.60£28.00 (ex. VAT)

Cosworth TrackMaster Rear Brake Pads Mitsubishi Lancer Evolution 4-9 Brembo

Cosworth

Cosworth CFT3009 Rear Brake Pads Mitsubishi Lancer Evolution 4, 5, 6, 7, 8 & 9 Brembo's 1998-2007High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£33.60£28.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads VAG, VW Golf, Scirocco, Octavia

Cosworth

Cosworth CFS3032 Front Brake Pads VAG Audi TT, Golf MK5, Scirocco, Superb & More!High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in

£33.60£28.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads Nissan Skyline R32 GTR, R34 GTT

Cosworth

Cosworth CFS3023 Rear Brake Pads Nissan Skyline R32 GT-R, R34 GT-T, Subaru Impreza EJ20 High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in

£36.00£30.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads Audi TT, TDi TFSi

Cosworth

Cosworth CFS3035 Front Brake Pads Audi TTdue to over stocks special offer prices availableHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£40.80£34.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads Mazda MX5 NC 2006+

Cosworth

Cosworth CFS3014 Front Brake Pads Mazda MX5/Roadster NC 2006+ 1.8L/2.0Ldue to over stocks special offer prices availableHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£42.00£35.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads VAG Golf, Scirocco, Passat, Octavia

Cosworth

Cosworth CFS3030 Front Brake Pads VAG Golf, Scirocco, Passat, Octavia High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£42.00£35.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads Audi S3, Audi TTRS, TTS

Cosworth

Cosworth CFS3036 Front Brake Pads Audi S3, Audi TT, TTS & TTRSdue to over stocks special offer prices availableHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£45.60£38.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads VAG Golf 2.0 GTi, Octavia, Polo

Cosworth

Cosworth CFS3028 Front Brake Pads VAG Golf, Octavia, Polo, Fabia & More!High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£45.60£38.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads Sierra Cosworth 2WD 1985-90

Cosworth

Cosworth CFS3022 Front Brake Pads Sierra Cosworth 2WD 1985-1990due to over stocks special offer prices availableHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.v

£48.00£40.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads Ford Fiesta ST 2004-08

Cosworth

Cosworth CFS3011 Front Brake Pads Ford Fiesta ST 2004-2008due to over stocks special offer prices availableHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations

£48.00£40.00 (ex. VAT)

Cosworth TrackMaster Rear Brake Pads Mitsubishi Lancer Evolution X 2008+

Cosworth

Cosworth CFT3019 Rear Brake Pads Mitsubishi Lancer Evo 10 2008+High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£48.00£40.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads Subaru Impreza EJ20 1998-2002

Cosworth

Cosworth CFS3007 Rear Brake Pads Subaru Impreza EJ20 1998-2002High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in

£62.40£52.00 (ex. VAT)

Cosworth Streetmaster Rear Brake Pads Nissan 350Z, Subaru Impreza WRX STi 2002+

Cosworth

Cosworth CFS3008 Rear Brake Pads Nissan 350Z Z33 Brembo, Subaru Impreza WRX STi 2002+High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£62.40£52.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads Ford Focus RS MK2

Cosworth

No Longer AvailablePlease See Below AlternativeCosworth CFS3017 Rear Brake Pads Ford Focus RS MK2High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations. 

£75.60£63.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads Ford Focus ST225 2005+

Cosworth

No Longer AvailablePlease See Below AlternativeCosworth CFS3013 Rear Brake Pads Ford Focus ST225 2005+High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£92.40£77.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads Honda Civic Type R FN2 Euro

Cosworth

Cosworth CFS3016 Rear Brake Pads Honda Civic Type-R FN2 & MUGEN Euro SpecHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations. 

£97.20£81.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads Nissan 350Z, Honda Integra DC5

Cosworth

Cosworth CFS3012 Front Brake Pads Nissan 350Z Z33, Honda Integra Type-R DC5, Skyline V35High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£103.20£86.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads AP Racing Caliper 6 Piston CP7048

Cosworth

Cosworth CFSA006 Front Brake Pads AP Racing Caliper 6 Piston CP7048High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£117.60£98.00 (ex. VAT)

Cosworth TrackMaster Front Brake Pads AP Racing Caliper 4 Piston CP5200.

Cosworth

Cosworth CFTA004 Front Brake Pads AP Racing Caliper 4 Piston CP5200High Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£118.80£99.00 (ex. VAT)

Cosworth StreetMaster Rear Brake Pads Nissan GT-R R35 VR38DETT

Cosworth

Cosworth CFS3001 Rear Brake Pads Nissan GT-R R35 3.8L Twin TurboHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding in

£180.00£150.00 (ex. VAT)

Cosworth StreetMaster Front Brake Pads Golf R32, Audi RS4, Passat W8

Cosworth

Cosworth CFS3033 Front Brake Pads Volkswagen Golf 3.2 R32, Audi RS4, VW Passat W8due to over stocks special offer prices availableHigh Performance Brake Pads for Road and Track vehicles.Cosworth's many years of Motorsport experience has taught us that stopping power is just as critical to performance as engine power. With that in mind, Cosworth has developed two lines of performance brake pads for genuine fast road car and track performance enthusiasts - StreetMaster and TrackMaster.Manufactured in the UK, Cosworth brake pads feature a 1.5mm granulated inter-layer which not only serves to act as a shock absorber, helping to reduce stress on the rotor surface but triples bonding strength, diminishing edge lifting. To reduce the bedding-in or seating-in time - this is the time it takes for the pad and disc to adapt to each other - all Cosworth brake pads are heat seared. This process heats the friction material in excess of 600 degrees C, toasting the surface, greatly enhancing the performance the first time that the driver applies the brakes. Scorching pads also significantly reduces initial fading - fading increases the necessary force and pressure required to maintain the deceleration of the vehicle. Cosworth's brake pad range offers exceptional performance without compromise.Cosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering predictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually fromfirst pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent brakingtechnologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth StreetMaster brake pads are a road legal R90, carbon based , medium-hard sports pad suitable for fast road and light track day applications.StreetMaster pads offer superior bite at low temperature and remain very stable over a wide temperature range up to 650°C delivering preictable braking & an excellent "pedal-feel".Medium-hard sports pad suitable for heavy duty/fast roadECE R90 approvalSuperior bite - 0.5µ friction coefficient - virtually from first pedalStrong brake effect up to 650°CChamfered edge - avoid liftingFitted with premium quality shim hardware - silent braking technologyDurability factor 6.5 with rotor minimal disc abrasionProduces consistent, predictable braking performanceHeat seared to reduce bedding inCosworth TrackMaster brake pads offer exceptional performance for Track Day and Event drivers.With the brake pads heat seared during production, so reducing bed-in periods, TrackMaster brake pads deliver a strong braking effect through 800C consistently and reliably with a great pedal response.Track day drivingExtremely high friction level 0.7µ friction coefficientStrong brake effect through 800°C"Vee" line expansion groove technology - superb debris clearanceFitted with premium quality shim hardware - silent braking technologyDurability Factor 9.5 with minimal disc abrasionSuper fast "bed-in" typically under 2 lapsHeat stable,  predictable & heat cycle exceptionally wellThis track formulation CAN be safely used on highways except in Europe where ECER90 approvals are required. This pad has too much brake effect to be compliant with these regulations.

£180.00£150.00 (ex. VAT)