COBB Exhausts

COBB Exhaust hanger kit - MK3 Focus ST

COBB Tuning

To help reduce excessive exhaust movement that can lead to the occasional rattle or rubbing, we offer highly durable Urethane exhaust hangers which are an exact replacement for the factory units. The urethane mounts are much more rigid than the soft, factory rubber mounts and come in handy when your exhaust system occasionally taps the subframe or exhaust tunnel during aggressive driving.Having trouble with your aftermarket exhaust moving around too much during spirited driving? The COBB Polyurethane Exhaust Hangers will keep your exhaust firmly in place no matter if you're taking the long way to work or rowing the gears at the track! This kit includes all 4 hangers needed for your exhaust.Features:Polyurethane ConstructionReduces Excessive Exhaust MovementQuick Install1 Twist In Hanger3 Two Hole Conventional Hangers

£79.99£66.66 (ex. VAT)

COBB 3" Cat-Back Exhaust - Mazdaspeed3 GEN1 SS

COBB Tuning

The COBB Tuning Gen1 MAZDASPEED3 Cat-Back is constructed purely from 304 Stainless Steel. The system starts with a stock donut-style flange that mounts to the OEM down pipe or any stock-replacement down pipe, such as the COBB Tuning 3" Down pipe. Next up is a polished resonator section with attractive rolled end-cap, followed by a polished low-restriction straight-through muffler section, also with this attractive rolled end-caps. A thick stainless-steel 2-bolt flange connects to the final section of the exhaust that ends in a tasteful, slash-cut 3.5" double wall tip featuring an etched COBB logo. This COBB Tuning exhaust system conforms to the SAE dictated 95-decibel exhaust noise level limit enforced by California, as well as other states in the US.The COBB 3" SS Cat back Exhaust was engineered specifically to match the performance needs of the 2007-2009 MAZDASPEED3. The attention to detail that goes into the fabrication of this cat back makes it a shame to hide it underneath the car. Manufactured using mandrel-bent T304 stainless steel with a custom resonator and high-flow muffler for optimal performance and reliability. Its factory-like fit, attractive finish and subtle yet deep exhaust note put it safely 11 dB below the SAE J1169 limit.304 Stainless Steel for Corrosion ResistanceTIG Welded ThroughoutPolished 4" TipImpressive SoundWithin SAE J1169 Sound Restrictions If this item is not showing as in stock with us, this would be ordered direct from COBB Tuning, so this could take up to two weeks to arrive to you. 

£675.00£562.50 (ex. VAT)

COBB Cat-Back Exhaust System - Ford Focus ST 2012>2018

COBB Tuning

The COBB 3" Stainless Steel Dual Tip Cat-Back for the Ford Focus ST is a direct replacement cat-back exhaust that boasts full 304 stainless steel construction, custom inline mufflers, and dual 4" tips resulting in a unique exhaust note.3" 304 Stainless SteelDual 4" Slash Cut Double Wall TipsCustom Inline MufflersCNC Mandrel Bent TubingResonatedIf this item is not showing as in stock with us, this would be ordered direct from COBB Tuning, so this could take up to two weeks to arrive to you. 

£925.00£770.83 (ex. VAT)

COBB Cat-back Exhaust - MK3 Focus RS 2016-2018

COBB Tuning

Our 3" Stainless Steel Dual Tip Cat-Back for the Ford Focus RS is a direct replacement cat-back exhaust that boasts full 304 stainless steel construction, custom inline straight through resonator plus muffler, and dual polished 4.5" double-wall slash cut tips.Our exhaust also features the same OEM exhaust valve found in the stock cat-back, so there is no need to remove and transfer the original unit. The exhaust valve is a direct plug and play connection that is controlled via the in car drive modes that work perfectly with our OTS maps or a custom Pro-Tune.This cat-back checks all the boxes. It sounds very aggressive when it's "race-car" time with the exhaust valve open, but retains OEM like convenience and noise reduction when needed with the valve closed. Plus increased flow that is ready to handle big increases in power gives you big performance potential along with the big sound!Features:High quality 304 Stainless steel constructionCNC mandrel bent tubingDual 4.5" polished tips with COBB logoOEM exhaust valve ready for plug & play installCompatible with stock or COBB downpipeIf this item is not showing as in stock with us, this would be ordered direct from COBB Tuning, so this could take up to two weeks to arrive to you. 

£1,425.00£1,187.50 (ex. VAT)