Turbo Blankets

QUICK VIEW

Forge Gold Heat Resistant Wrap

Forge

The 2 for £25 offer is only valid on orders without additional coupons being used. You must add two to your cart for the offer to automatically apply.State of art polymer laminated glass clothSuperb heat barrier qualitiesWithstands radiant temperatures up to 450°C/850°FUltra thin for minimal clearanceAs used in WRC and F1Each roll is 50mm wide x 5 metres long (2" x 16ft)Adhesive backing for ease of fittingAfter extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C.It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove.As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money.When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle.Typical uses are:Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…

£25.69£21.41 (ex. VAT)
QUICK VIEW

Forge Turbo Blanket for T78/T88/T6

Forge

This product fits the T78, T88, and T6 turbochargers.The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by your turbocharger. This design has been created to withstand the harshest of environments and are designed to assist in the protection and prolonging of your engine components. Its unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.Stainless Steel RivetsStainless Steel FastenersCarbon fabric Outer ShellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature silica fabricInterior Surface:· Max Temperature Rating: 2300°F/1260°C· Continuous Use Limit: 1832°F1000°CExterior Surface:· Direct Contact Limit: 1800°F/982°C· Radiant Heat Limit: 2500°F/1371°C

£71.99£59.99 (ex. VAT)
QUICK VIEW

Forge Motorsport Turbo Blanket

Forge

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team for the EA888 TSI vehicles, the Forge turbo blanket is designed to assist in the protection and prolonged life of the engine components.· Stainless Steel Rivets· Stainless Steel Fasteners· Carbon fabric Outer Shell· Calcium Magnesium Silicate Wool constructed Inner Core· High temperature silica fabricThe unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:T4T5T25The Garrett GTX28 and GTX30 RangeBorg Warner EFR6258Interior Surface:· Max Temperature Rating: 2300°F/1260°C· Continuous Use Limit: 1832°F1000°CExterior Surface:· Direct Contact Limit: 1800°F/982°C· Radiant Heat Limit: 2500°F/1371°C Complimentary ProductsUprated IntercoolerHigh Flow Discharge PipeCarbon Fibre Induction Kit

£75.54£62.95 (ex. VAT)
QUICK VIEW

Forge Turbo Blanket For Subaru

Forge

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by your turbocharger. This design has been created to withstand the harshest of environments. The Forge turbo blanket is designed to assist in the protection and prolonging of your engine components and its unique design will assist in reducing turbo lag and produce cooler air intake temperatures,You will find that the Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.Stainless Steel RivetsStainless Steel FastenersCarbon fabric Outer ShellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature silica fabric This product fits the Subaru models below:2002 - 2005 Subaru Impreza WRX 2.0L2006 - 2011 Subaru Impreza WRX 2.5L2004 - 2011 Subaru Forester 2.5L2005 - 2009 Subaru Legacy 2.5LThis product has also been fitted to a Subaru fitted with a VF43 turboInterior Surface:· Max Temperature Rating: 2300°F/1260°C· Continuous Use Limit: 1832°F1000°CExterior Surface:· Direct Contact Limit: 1800°F/982°C· Radiant Heat Limit: 2500°F/1371°C

£87.53£72.94 (ex. VAT)
QUICK VIEW

Forge Turbo Blanket for Honda Civic (FK2/FK8)

Forge

The Forge turbo blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.Stainless Steel RivetsStainless Steel FastenersCarbon fabric Outer ShellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature silica fabricThe unique design will assist in reducing turbo lag and produce cooler air intake temperaturesThe Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.Interior Surface:· Max Temperature Rating: 2300°F/1260°C· Continuous Use Limit: 1832°F1000°CExterior Surface:· Direct Contact Limit: 1800°F/982°C· Radiant Heat Limit: 2500°F/1371°C

£89.99£74.99 (ex. VAT)
QUICK VIEW

Forge Alfa Romeo MiTo QV Turbo Blanket

Forge

The Forge Motorsport FMTUB11 has been designed for the Alfa Romeo MiTo QV. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger.This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F (1370°C) of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.

£99.92£83.27 (ex. VAT)
QUICK VIEW

Forge T3 Turbo Blanket

Forge

The Forge Motorsport FMTUBL13 has been designed for the use with externally wastegated Garrett GT3071R, GTX3076R, and G25-550 and KP39, Comp-RS341 turbochargers. The turbo blanket also fits some internally gated turbo and is not limited to the above application list. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger insulating the hot side of the turbo’s compressor housing ensuring the cold sides work to its optimum efficiency.This design has been created to work in the harshest of environments and proven to withstand temperatures up to 2500 °F or 1370°C of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket.Stainless Steel RivetsCarbon fabric outer shellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature Silica fabricTo suit T3 Turbo chargers

£107.09£89.24 (ex. VAT)

Forge T3 Turbo Blanket

The Forge Motorsport FMTUBL13 has been designed for the use with externally wastegated Garrett GT3071R, GTX3076R, and G25-550 and KP39, Comp-RS341 tur...
£107.09
View details
QUICK VIEW

Forge T25/T28 Turbo Blanket

Forge

The Forge Motorsport FMTUBL12 has been designed for the use specifically with the externally wastegated Owen Developments GBT-5465-HTA Turbocharger as used and developed on our Forge Motorsport Mk1 Golf Demo Race car.The application also fits but is not limited to Garrett GT2254R, GT2560R, GT2871R, GT286ORS, GTX25/28, and TD04 14T, T25G, VF34, VF35, IGI VQ22 turbochargers. The turbo blanket also fits some internally gated turbochargers and is not limited to the above application list.This turbo blanket is designed to isolate the radiant heat produced by the turbocharger insulating the hot side of the turbo’s compressor housing ensuring the cold side works to optimum efficiency. This design has been created to work in the harshest of environments and proven to withstand temperatures up to 2500 °F or 1370°C of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket.Stainless Steel RivetsCarbon fabric outer shellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature Silica fabricTo suit T25/T28 Turbo chargers

£107.09£89.24 (ex. VAT)
QUICK VIEW

Forge Turbo Blanket for Fiat 500, 595 and 695 (Not IHI Turbos)

Forge

The Forge Motorsport FMTUBL5 has been designed for the Fiat 500, 595, and 695 turbo (this will not fit those fitted with IHI turbo). This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F (1370°C) of radiant heat which will assist in protecting and prolonging the life of engine components.Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. The Abarth turbo blanket is a very cheap mod which looks 100% better than the standard offering. Fits great and tool no time to install. Well worth the money Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket.Stainless Steel RivetsCarbon fabric outer shellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature Silica fabric

£109.99£91.66 (ex. VAT)
QUICK VIEW

Forge Turbo Blanket for Renault Megane Mk3 R.S

Forge

The Forge Motorsport FMTUBL15 has been designed specifically for the Renault Megane Mk3 R.S range stock turbo chargers. This turbo blanket replaces the primitive OE heat shield and is designed to further isolate the radiant heat produced by the turbocharger. The Forge turbo blanket also incorporates further protection to the engines down pipe. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 1370°C (2500°F) of radiant heat, which will assist in protecting and prolonging the life of engine components.Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.Stainless Steel Rivets and FastenersCarbon fabric outer shellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature Silica fabricComplimentary ProductsBlow Off ValveActuatorIntercooler

£146.98£122.48 (ex. VAT)
QUICK VIEW

Forge Turbo Blanket for the Peugeot 308 GTI MK2 (2015-2020)

Forge

Fits Peugeot 308 GTI MK2Proven to withstand temperatures up to 2500°F or 1370°CProlongs the life of engine componentsImproves the appearance of the 308’s engine bayStainless Steel Rivets and FastenersCarbon fabric outer shellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature Silica fabric The Forge Motorsport FMTUBL14 is a turbo blanket that has been specifically designed for the Peugeot 308 GTI MK2. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The OE heat shield still allows a considerable amount of heat transfer thus creating a warmer engine compartment, which will have an effect on the engines components and increase intake temperatures.This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. As a bonus the FMTUBL14 improves the appearance of the 308’s engine bay considerably,The OEM turbo heat shield tarnishes over many heat cycles, a problem which does not affect Forge Motorsport turbo blankets. All Forge Motorsport turbo blankets are designed and manufactured to the highest standards and use superior materials, unlike some turbo blankets which are constructed using substandard materials.Complimentary ProductsOur uprated Forge dump valve for the Peugeot 308 GTI has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Peugeot 308 GTI, this is a fully atmospheric blow off valve, so you can enjoy that fantastic “pshh” sound! This part replaces OEM part number 9808798580A set of 4 ultra-high performance brake lines. These are a direct replacement/upgrade for the OEM brake line set and require no further modifications to fit.These lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings, resulting in a brake hose that will perform under the most extreme and harshest conditions.Our complete plug and play intercooler solution for the Peugeot 308 GTI. With reports of the IATS (inlet air temps) reaching dangerous levels on track days in the summer months resulting in the engines ECU pulling out timing to prevent detonation. This can cause damage to your vehicles engine thus resulting in a loss of power in the highly tuned 1.6 litre engine.

£146.98£122.48 (ex. VAT)
QUICK VIEW

Forge Turbo Blanket for Mini, Citroen DS3 (Pre 2016 Only), and Peugeot 207/208 GTI

Forge

The Forge Motorsport FMTUBL4 has been specifically designed for the Mini R56 stock turbo charger, and also fits the Peugeot 207/208 GTI. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The stock Mini heat shield is inadequate and can result in warping the standard air scoop located in the bonnet.This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500 °f of radiant heat which will assist in protecting and prolonging the life of engine components.Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket.Stainless Steel RivetsStainless Steel FastenersCarbon fabric outer shellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature Silica fabric

£149.88£124.90 (ex. VAT)
QUICK VIEW

Forge BMW N54 Twin Turbo Pair of Turbo Blankets

Forge

This pair of Forge turbo blankets are designed for the N54 BMW (1M, 135i, 335i) and designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components.Stainless Steel RivetsStainless Steel FastenersCarbon fabric Outer ShellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature silica fabricThe unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.Interior Surface:· Max Temperature Rating: 2300°F/1260°C· Continuous Use Limit: 1832°F1000°CExterior Surface:· Direct Contact Limit: 1800°F/982°C· Radiant Heat Limit: 2500°F/1371°C

£209.99£174.99 (ex. VAT)
QUICK VIEW

Forge K03/K04 Turbo Blanket

Forge

K03/K04 Forge Turbo Blanket - This blanket fits a multitude of applications - Please check the listing belowThe Forge turbo blanket is designed to isolate the radiant heat produced by your turbocharger. These turbo blankets have been extensively tested in the harshest environments, road race and track. The Forge development team have designed this product to withstand the harshest of environments and to assist in the protection and prolonging of your engine components. Its unique design will assist in reducing turbo lag and produce cooler air intake temperatures,The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.Fitting the Forge turbo blanket will also prevent the associated engine components from getting heat soaked by the turbocharger.Aerospace quality Stainless Steel RivetsStainless Steel FastenersCarbon fabric Outer ShellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature silica fabricinterior Surface:Max Temperature Rating: 2150°FContinuous Use Limit: 1850°FExterior Surface:Direct Contact Limit: 850°FRadiant Heat Limit: 1250°F

£212.34£176.95 (ex. VAT)
QUICK VIEW

Forge Mercedes A/CL/GLA45 Turbo Blanket (M133 Engine 355/376 BHP)

Forge

This turbo blanket should be fitted OVER the existing OEM heat shieldThe Forge Motorsport FMTUBL9 has been designed for the Mercedes A45, GLA, CLA AMG stock turbo chargers. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger by further insulating the OE heat shield, the Forge turbo blanket also incorporates further protection to the engines down pipe.This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 1370°C (2500°F) of radiant heat, which will assist in protecting and prolonging the life of engine components.Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.Simple to fit using existing OEM hardware.Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket.Stainless Steel RivetsCarbon fabric outer shellCalcium Magnesium Silicate Wool constructed Inner CoreHigh temperature Silica fabricPlease ensure your engine bay is the same as the one pictured in the 1st image below before purchasing this product; otherwise if you have the engine bay with the fire extinguisher (bulkhead fitted) and associated lines, as highlighted in the 2nd image below, the turbo blanket will not fit

£224.83£187.36 (ex. VAT)