Coupler Hose

QUICK VIEW

Forge Alloy Bayonet Style Hose Coupler

Forge

An Alloy Hose connector to convert standard hoses to push fit locking hoses. There are several different sizes available. These are ideally suited to VAG applications but will fit many manufacturers vehicles. Just measure your existing coupling. Type "A" 60mm outside diameter (o.d.) male bayonet coupling, suitable for a 51mm Internal diameter (i.d.) hose.PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES

£41.63£34.69 (ex. VAT)
QUICK VIEW

Forge Alloy Male to Male Bayonet 65mm Coupler with Inline Nipples

Forge

An alloy male to male bayonet style 65mm coupler with inline bayonet nipples.This coupler replaces the pressed steel hose coupler that is found on the VW / Audi/SEAT/Skoda 130 hp diesel engines ( ARZ engine code). The coupler connects the boost pipework to the intercooler ( see diagrams below ) This replacement eliminates the problem of the OEM couplers blowing apart. This upgrade is advisable to all software upgraded, or tuned engines and higher mileage standard vehicles.Please note Two couplers are required of different design "M" and "N" These can either be purchased separately or together (FMABHCMN) at a reduced cost.PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES

£41.63£34.69 (ex. VAT)
QUICK VIEW

Forge Alloy Male to Male Bayonet 65mm Coupler with Offset Nipples

Forge

An alloy male to male bayonet style 65mm coupler with offset bayonet nipples.This coupler replaces the pressed steel hose coupler that is found on the VW / Audi/SEAT/Skoda 130 hp diesel engines ( ARZ engine code). The coupler connects the boost pipework to the intercooler ( see diagrams below ) This replacement eliminates the problem of the OEM couplers blowing apart. This upgrade is advisable to all software upgraded, or tuned engines and higher mileage standard vehicles. Please note Two couplers are required of different design "M" and "N" These can either be purchased separately or together ( pt. no.FMABHCMN ) at a reduced cost.PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES

£41.63£34.69 (ex. VAT)
QUICK VIEW

Forge Alloy Female Hose Coupler

Forge

An alloy hose connector that can be fitted to a hose to allow fitment to push fit locking couplers. We currently have four sizes available including seals. Please note securing clips are not included. These couplers are ideally suited to VAG applications but will fit many manufacturers vehicles. Use the dimension table to check the size required for your existing coupler.

£54.56£45.47 (ex. VAT)
QUICK VIEW

Forge VW Transporter T5 TDI Turbo Bayonet Coupler

Forge

An alloy bayonet coupler for the VW T5 Transporter TDI. This replaces the original turbo coupler which, due to a very sloppy fit, is prone to leaking.We have redesigned this coupler so that it fits perfectly with minimal movement thus meaning no wear and no leaks.The coupler is compatible with the following engine codes: BPC, BNZ, AXD, BLJ, and AXE.PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES

£58.86£49.05 (ex. VAT)
QUICK VIEW

Forge Replacement Alloy Intercooler Couplers for 1.9 Diesel 130hp

Forge

A pair of alloy male to male bayonet style 65mm couplers. One coupler has inline bayonet nipples and the other offset. This pair of couplers replace the pressed steel hose couplers that are found on the VW / Audi/SEAT/Skoda 130 hp diesel engines ( ASZ engine code). The couplers connect the boost pipework to the intercooler ( see diagrams below ) This replacement eliminates the problem of the OEM couplers blowing apart. This upgrade is advisable to all software upgraded, or tuned engines and higher mileage standard vehicles.PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES

£73.54£61.28 (ex. VAT)