Dash Gauges & Interior Styling

QUICK VIEW

Steeda OBD II cover

Steeda

This OBD II port cover will ward-off any dealers or shops from reprogramming your vehicle, which would over write your aftermarket performance tune and render your expensive tuner useless. Made from high grade billet aluminium, this piece wont break like a plastic cover could.This piece is simple to install and installation only takes a few seconds. Easily removes to access the port at a later time.Note:This piece is designed for a precise and snug fit. A bit of force may be needed when installing on some vehicles.Product BenefitsHard anodized and laser engravedPrevents technicians from flashing your computer without telling youFits ANY OBD II equipped vehicle [dependent on port placement]Part: 555-1260

£33.00£27.50 (ex. VAT)

Steeda OBD II cover

This OBD II port cover will ward-off any dealers or shops from reprogramming your vehicle, which would over write your aftermarket performance tune an...
£33.00
View details
QUICK VIEW

Steeda MK3+ Focus Accelerator pedal spacer ST/RS/ ALL (2013-2018 )

Steeda

Steeda's billet 6061 aluminum Accelerator Spacer is a lightweight upgrade that won't lighten your wallet. Install is an easy 15 minute parking lot procedure requiring a 13mm socket, extension and ratchet handle.The Mk3 Focus is a well designed, solid performer that could use a little help in stock form to take full advantage of the car's full performance potential. Steeda's US manufactured spacer is a new product developed to make your daily driving experience more pleasurable and improve your lap times at the track.The Mk3 Focus ST and RS have a glaring error when it comes to the accelerator pedal height. When compared to the brake pedal, the accelerator pedal height makes it nearly impossible to heel and toe rev-match properly. Steeda's 3/8" thick spacer moves the accelerator pedal out closer in plane with the brake pedal for easier heel and toe rev-match. This equates to faster speed through the corners as well as perfect launches from a dead stop.Product features:Optimal spacing for heel and toe shiftsLightweight 6061 solid billet constructionSpaces gas pedal out 3/8" for better reachPart: 555-1281STEEDA INSTALL TIP: If the studs are not long enough to tighten up sufficiently it usually means you have the spacer the wrong way round! Make sure it is fitted securely and correctly.

£49.99£41.66 (ex. VAT)
QUICK VIEW

Turbosmart Boost Gauge 0-30psi 52mm

Turbosmart

Turbosmart mechanical boost gauge is the perfect accessory for any of our Gated Boost Control Valves Featuring simple mechanical operation, a black face with silver bezel, bright back-lighting and vacuum to 30psi range.

£56.34£46.95 (ex. VAT)
QUICK VIEW

Turbosmart Boost Gauge 0-2 BAR 52mm

Turbosmart

Turbosmart mechanical boost gauge is the perfect accessory for any of our Gated Boost Control Valves Featuring simple mechanical operation, a black face with silver bezel, bright backlighting and vacuum to 2Bar range. All hook-up and panel mounting hardware included.

£56.34£46.95 (ex. VAT)
QUICK VIEW

Steeda Focus ST/RS pedal kit

Steeda

Steeda Focus Premium Aluminum Pedal kit or race focussed Heel/Toe Pedal Kit for 2013-2018 MK3 Ford Focus ST and 2016+ RS is designed to enhance the appearance of your Focus ST/RS interior. The added width to the accelerator pedal for the race application allows for easier manipulation between the go pedal and the brake pedal.This pedal kit is perfect match to the Steeda billet dead pedal (Dead pedal is LHD only fitment)Our Steeda Focus Premium Aluminum Heel/Toe Pedal Kit is made from aerospace quality 6061 billet aluminum, in our manufacturing plant in Valdosta, Georgia. We take so much confidence in our manufacturing and quality of products that we are proud to offer a LIFETIME WARRANTY on these Steeda Focus Heel/Toe Pedal Kit.Product BenefitsWider gas pedal allows for easy manipulation of gas and brake pedalPremium quality aerospace aluminumInstalls with basic toolsLifetime Steeda WarrantyPart:555-1266 - Regular Pedal Kit555-1267 - Heel / Toe Pedal KitINSTALL GUIDE - CLICK HERE

£60.95£50.79 (ex. VAT)
QUICK VIEW

Steeda Focus MK3 Billet interior hood latch

Steeda

This Steeda Ford Focus mk3 Billet Aluminium Interior Hood Latch will look great on the inside of your Focus, including the Focus ST and Focus RS and is available in plain billet (i.e silver) or anodized red or black to match your interior scheme.Our Focus Billet Aluminium Interior Hood Latch was designed to completely replace your flimsy factory plastic interior hood latch. We took our design a step further by redesigning the shape of this lever to be more ergonomic - the stock interior lever is a flat plastic piece that could make it hard to gain leverage to pull it and pop your hood. With our Steeda interior hood latch you will notice popping the hood is easier due to the curvature of the billet piece.After continued use during mod installation you may find the OEM latch to have more play, on the verge of breaking or has actually broken. Steeda has engineered a great solution to your interior hood latch problems - by replacing your stock interior hood latch with our billet aluminium replacement you can prevent any mishaps in the future.We have created this interior latch from lightweight and strong aluminium to assure it never breaks again. Designed and manufactured in our facility in Valdosta, Georgia you can ensure this aluminium interior hood latch is nothing short of the quality you've come to expect from Steeda!Product BenefitsManufactured out of billet aluminum for strength and longevityAvailable: POLISHED, RED or BLACK finishesCurved design gives you more leverage when popping your hoodAdds style to your Focus mk3 interiorEasy bolt-on installationMade in the USALifetime Steeda WarrantyPart Number:555-1248 - Billet 555-1248-R - Red555-1248-B - Black

£62.99£52.49 (ex. VAT)
QUICK VIEW

COBB Ford Shift Knob - Focus ST 2013-2018, Focus RS 2016-2018, FIesta ST 2014-2019

COBB Tuning

Vehicle Fitment:Focus ST 2013-2018Focus RS 2016-2018Fiesta ST 2014-2019The COBB Knob is designed to keep those extended shifting sessions exhilarating. The billet aluminum base is anodized in your choice of red or black to help set the mood and is internally threaded to provide a tight fit onto the shifter shaft that won't come loose in the most frenzied of gear changes. The satin white delrin knob feels incredible and has a perfectly round contour to fit right in the palm of your hand. The package is complete with a COBB logo laser etched into the base to let everyone know whose knob you hold. The knob weighs in at a lightweight 113.5 grams, encouraging fast, smooth thrusts into every gear. Spin on a COBB Knob and go for a ride! This product is not compatible with the Ford Racing Shifter (M-7210-FST) on the Focus STThe COBB Knob is the ultimate complement to your manual shifter. With a shape and weight inspired by motorsports and materials chosen for comfort in both hot and cold climates, the COBB Knob is equally at home in racing competition or everyday use.Anodized Aluminum Base, Laser Etched LogoSatin White Delrin Knob Stays Comfortable in Hot and ColdMaintains Factory Reverse LockoutFactory Knob Height: 1.95", COBB Knob: 2.65"Factory Knob: 153g, COBB Knob: 113.5gFEATURESFord Shift Knob Focus ST 2013-2018, Focus RS 2016-2018, Fiesta ST 2014-2019Anodized Aluminum Base, Laser Etched LogoSatin Black Delrin Knob Stays Comfortable in Hot and ColdMaintains Factory Reverse LockoutFactory Knob Height: 1.95", COBB Knob: 2.65"Factory Knob: 153g, COBB Knob: 113.5gIf this item is not showing as in stock with us, this would be ordered direct from COBB Tuning, so this could take up to two weeks to arrive to you. 

£90.00£75.00 (ex. VAT)