Forge Motorsport Valve Service Kit

Forge

Forge Motorsport Valve Service Kit

For info on how to service your valve, click on the 'Instructions' tab above or visit Forge Motorsport guides here

To order the correct part, you will need to the know the Forge product code of your valve. This will start with 'FM' and will be located on your original purchase receipt, or on the side of the product box. By servicing your valve/adaptor at regular intervals, you can ensure that your Forge Motorsport product will last a lifetime.

Each service kit varies depending on which product you need it for: 

  • Valve service kits ONLY contain replacement "O" rings, piston, and grease. 
  • Blow off adaptor service kits contain ONLY replacement "O" rings and bolts. 
  • The splitter valve service kit contains a replacement brass piston and spring.   
  • Valves that have O-rings situated on the piston will not come with a piston as the wear is on the O-rings rather than the piston itself.

Valve Service Kit Instructions 1

Valve Tightening Instructions V3 3


Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised. 
Product Code: FMDVSK
£0.00
£0.00 (ex. VAT)
£17.99
£14.99 (ex. VAT)
£0.00
£0.00 (ex. VAT)
£17.99
£14.99 (ex. VAT)
Earn 17 reward points
This product will be shipped to you direct from our supplier.

Availability: In stock with our UK Supplier

Availability: Sorry! We're out of stock

Forge Motorsport Valve Service Kit

Recommend to a friend

DELIVERY & RETURNS

Related products

Forge 34mm Split Recirculation and Blow Off Valve

Forge

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerThe Splitter is a truly remarkable valve that gives a combination of blow off and recirculation valve operation all at the same time and has been specifically designed for the many turbo engined applications that operate metered airflow management sysyems. This means you get all the noise of the blow off valve whilst retaining the compatibility with the recirculation requirements of the engine management system. As a bonus we also offer the ability to convert the valve to recirculation only mode for those times when stealth running is required.This valve uses a Brass piston which utilises new sealing technology along with a variable spring preload incorporating a ratchet type top adjuster that will allow for the positive and precise adjustment to match the valve to your engine. This is achieved by using a unique single, conical, progressive rate spring that can allow for the retention of boost pressure over a wide adjustment range. This unique spring design also allows for unrestricted piston travel and flow volume regardless of the amount of pre-load adjustment added to the spring. Other manufacturers valves using cylindrical springs with adjustable pre-load often experience restricted piston travel and a reduction in flow volume.This valve has 34mm pipe connections. In The Box:1 x FMBSPLTR Valve1 x Valve Blanking Cap1 x 500mm of 4mm Vacuum Tube1 x Instructions1 x Forge Sticker To service this valve, access the valve piston by removing the 3 cap screws at the base of the valve and simply clean the piston chamber using brake cleaner or similar cleaning fluid before installing the new spring and piston. Please observe the correct spring and piston orientation when installing the serviceable parts, as seen in the attached drawing.

£203.90£169.92 (ex. VAT)

Forge Atmospheric and Recirculating Valve for Hyundai i30N, Kona N, and Veloster N

Forge

This part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more hereOur uprated valve for the Hyundai i30N, Kona N, and Veloster N has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a fully atmospheric (blow off) valve, or a recirculating valve - you choose!Our unrivalled design uses a boost to side entry on the valve meaning unlike our competitors the valve cannot lift under high or low boost applications. The advantage of this eliminates the need to change the valves internal spring rate to a higher tension when tuning the vehicle.This part replaces OEM Part No. 282342-CTA4Highlights:Utilising world leading springs for more precise operation and consistencyAll internal and external components have been made in the UK, ensuring top quality, and offering a valve with faster response times and longer service intervalsThe piston uses heat stabilised Viton O-ringsLubricated with high temperature Mobil1 grease to ensure a long life with minimal wear and very long service intervalsA super durable and responsive aluminium pistonFully serviceable and rebuildable in minutesAvailable in anodised blackUnlike other valves on the market, ours produces no check engine lights (EML)Covered by the unique Forge Lifetime Warranty*This kit will include all the parts required for atmospheric or recirculating set up.

£200.50£167.08 (ex. VAT)

Forge Atmospheric Dump Valve for Audi S4 B9 and Audi S5 B9

Forge

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerForge Motorsport Atmospheric blow off valve for the Audi S4 B9 and Audi S5 B9This product is a solenoid operated valve that integrates seamlessly with the OEM electronics resulting in absolutely no-fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. These valves, designed and manufactured by Forge are engineered to remedy the failure issues experienced with the OEM solenoid valves when the diaphragm or plastic piston fails which would effectively result in a boost leak.Forge valves use full billet alloy construction with a piston based internal design that provides significantly improved reliability, lightning fast response and will withstand additional tuning upgrades.A recirculating valve replacement is also available. FMDV13RIn The Box:1 x FMDV13 Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Blue Spring (Uprated)10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x Instructions1 x Forge Keyring and Sticker

£230.00£191.67 (ex. VAT)

Forge Atmospheric Dump Valve for Ford Focus 1.5T

Forge

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerThis valve is for the turbocharged 1.5-litre EcoBoost petrol engine. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade,Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind.All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible. In the Box:Solenoid & Bracket Wiring Harness Vac Tap Blue idle springForge Keyring & Sticker4mm Vacuum HoseCable Ties (x10)Instructions

£156.65£130.54 (ex. VAT)

Forge Atmospheric Valve for Honda Civic FK8 Type R

Forge

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerUsing components from our highly successful and ever popular Civic FK2 Atmospheric Dump Valve Kit, the development engineers at Forge have redeveloped the kit to fit the repackaged 4-cylinder K20 2.0 Turbo engine in the Honda FK8 Civic Type R.This installation requires the removal of the OEM DV. It is our recommendation that the OEM valve is removed and replaced with the blanking plate supplied in this kit.Developed and machined by Forge engineers in our UK CNC machine shop, the valve features our unique robust twin piston design, which allows for fine-tuning with interchangeable springs.The Forge silicone hose in this kit has been designed to not only incorporate the valve but also smooth the airflow.The construction of the hose has been engineered to exceed that of the OEM fitment and will enhance any engine bay both technically and aesthetically with the choice of black or red hose.Covered by our industry leading Lifetime warranty.This product comes assembled with a yellow spring. If you wish to further tune this product to fit the needs of your engine, please see the spring tuning kit below.In the Box:1 x FMDV19 Valve1 x Custom Silicone Hose1 x 2m of 4mm Silicone Hose1 x 150mm of 5mm Silicone Hose1 x Blanking Plate1 x Plastic Hose Coupler1 x Brass Hose T-piece3 x Stainless Steel Hose Clamps12 x Zip Ties

£178.73£148.94 (ex. VAT)

Forge Blow Off Adaptor for Audi, VW, and SEAT 1.4 TSi Engine

Forge

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerYet another first for the Volkswagen and Audi Tuning Market from Forge!With the introduction of the VAG 1.4 litre TSi Turbo/Supercharged Engine, we have developed an Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with complexities of this engine.Please choose from a black or silver adaptor using the options above. In The Box:1 x FMDV14TSI Adaptor2 x M6 x 35 Socket Cap Bolts5 x M6 Washers1 x Forge Sticker

£75.07£62.56 (ex. VAT)

Forge Blow Off Adaptor for Audi, VW, SEAT, and Skoda

Forge

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerYet another first for the Volkswagen and Audi Tuning Market from Forge Motorsport!With the introduction of the VAG TSi Turbo Engine, we developed a patented atmospheric blow-off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with the Bosch engine management systems employed.This is not only a high quality replacement for vehicles fitted with the OEM solenoid valve part number 06F 145 710 D, but will fit earlier applications of the 2.0 FSiT, the later TFSi 2 litre, and the 5 cylinder TTRS.. In The Box:1 x FMDV14T Blow Off Adaptor3 x M6 x 40 Socket Cap Bolts1 x Forge StickerIf you are unsure if this product is suitable for your application, please contact us.

£75.07£62.56 (ex. VAT)

Forge Blow Off Valve for VW, Audi, Seat & Skoda 1.5 TSI

Forge

The Forge Motorsport FMDV22 Blow off valve kit now fits all engine variants, please identify from the images below whether you require the extra breather adapter for you application.We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerIf your engine bay is the same as shown above then you will require the aditional breather adapter so please make sure to select 'Yes' on the Breather adapter dropdown option.If your engine bay is the same as shown above you do not require the additional breather adapter, please make sure to select 'No' on the dropdown option.As the engine does not have a diverter valve fitted as standard, Forge have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle, but also increases the throttle response during gear changes by reducing turbo lag. It has been designed to help the turbocharger maintain its rotational speed ready for when you accelerate, whilst also taking the strain away from the impeller. Without removing this stress from your turbo, it could cause premature failure. Especially on engines and modified vehicles.This valve kit allows the fitment of our fast response blow off valve preventing turbo surge and prolonging the life of your engine’s turbocharger. The kit includes all of the necessary hardware and step by step installation instructions for any car enthusiast with appropriate garage tools to fit at home, in just a couple of hours! Due to the exposed position of the OEM boost pipe and the nature of heat cycle, the plastic that the OEM pipe is made from can deteriorate over time, becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicone hose (available in a choice of colours!). Highlights: CNC machined billet couplers and components CNC machined twin piston Forge valveThree hose options: red, blue, or black (Custom available but will incur a 50% non-refundable deposit and a lead time of 8-10 weeks)Forge valve will not bring on any check engine lights (EML) The hose has a quality inner lining of modified silicone known as 'Fluorosilicone'. This means that the hose will stay bright and vibrant, and will not deteriorate over time. Forge Motorsport lined hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically.The hose from this kit replaces OEM part numbers 05E.145.673.E and 05E.145.674.EWe cannot guarantee that this product will fit with all aftermarket intakes.Lifetime warranty.In the Box:1 x Atmospheric Dump Valve1 x Boost Tap/Take Off (Including Cork Gasket and Screws) Throttle Body and Turbo Couplers1 x Silicone Hose (Red, Blue or Black)3 x Hose ClampsAll fixings and fittings1 x Roll of Vacuum Tubing1 x Wiring Loom Extension1 x Forge Sticker

£285.83£238.19 (ex. VAT)

Forge Dual Piston Blow Off/Dump Valve

Forge

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerSuitable for most turbo cars with an Air Flow Meter. Made from billet aluminium, this atmospheric diverter valve dumps the charge-air to atmosphere creating the "Whoosh" sound when the throttle is lifted. This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably. Unlike single piston or diaphragm diverter valves, this uses counter balanced springs and dual pistons to prevent the valve from leaking air into the intake system at idle. This prevents our diverter valves suffering any of the failures associated with single piston and diaphragm type diverter valves.Please note if you are purchasing this valve for a Fiat Punto 1.4 93-99 you will also need a fitting kit which can be purchased here.All Forge Motorsport Dual-Piston Atmospheric Valves have been designed and built with the intent of venting 100% of the residual charge air remaining in your forced induction system to the atmosphere at throttle lift. While we have incorporated many elements into the design of the Dual-Piston valves to aid in their compatibility with mass air-flow sensor equipped vehicles, we cannot always guarantee that each individual’s application will be compatible with a valve that vents the charge air into the atmosphere.Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this valve onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of compensating for the loss of metered air through a vent-to-atmosphere valve such as this. In The Box:1 x FMDV004 Valve1 x Forge StickerIf you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.The valve has a port size of 25mm

£121.98£101.65 (ex. VAT)

Forge Dump Valve for the 1.2 and 1.4 TSI Engine

Forge

The Forge Motorsport dump valve for the 2015-on 1.2 TSI engine codes CJZA, CJZC, CJZD, CYVB as found in the Skoda Fabia, Skoda Octavia, VW Golf, VW Polo, Audi A1, Audi A3, Seat Ibiza and Seat Leon.The 1.2 and 1.4 TSI doesn’t have a dump valve from the factory, so this product allows you to have the traditional dump valve noise between gear changes and when letting off the gas pedal. It won’t bring on any check engine lights and the car will drive just as before.This kit totally replaces the plastic pipe from turbo to manifold with a silicon hose (available in a choice of colours),Everything else you need to install the valve is included in the kit together with full instructions.Unlike other valves on the market the Forge valve will not bring on any check engine lights. (EML) The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Flurosilicone.Lifetime warranty*­ Amazing. Arrived next day and fitted with some help from the instructions 20 mins after it arrived, makes a really nice subtle 'pshh' already had compliments from 3 strangers ­­ Great service, fast shipping excellent product quality! This Forge valve set up is designed to fit with the standard intake. We cannot guarantee it will fit with all aftermarket intakes. This will not fit the VW Golf GTE. The supplied blanking plug should be fitted if your car does not have a secondary breather.Please note this kit is only compatible with models that do not have a standard turbo mounted diverter valve. Earlier models that have a turbo mounted diverter valve as standard require the kit with part number FMDVA1TSI and FMDVATSIThis product design has been registered. Registration Number: 5004511Complimentary ProductsInduction KitTurbo BlanketBoost Tap

£249.99£208.33 (ex. VAT)

Forge Dump Valve Kit for VAG 1.0 TSI/GTI

Forge

This valve kit allows the fitment of a fast response blow off valve on the VAG 1.0 TSI/GTI engine, including the VW UP.As the engine does not have a diverter valve fitted as standard, Forge Motorsport have developed a twin piston dump valve that not only gives you an incredibly loud sound when lifting off the throttle but it also increases the throttle response during gear changes by reducing turbo lag. It is designed to help the turbocharger maintain its rotational speed ready for when you accelerate, as well as prolonging the life of your turbo.Due to the exposed position of the OEM boost pipe and the nature of an engines heat cycle, the plastic the OEM pipe is made from can deteriorate over time becoming brittle and susceptible to boost leaks. This kit totally replaces this plastic pipe from turbo to manifold with a silicon hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions.Anodised CNC machined billet couplers and components along with a tuneable CNC machined twin piston Forge Motorsport valve.Custom colours are available but will incur a 50% none refundable deposit and a lead time of 8-10 weeks.Unlike other valves on the market the Forge valve will not bring on any check engine lights. (EML) The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This ensures the colour of the silicon hose stays bright and vibrant and unlike our competitors will not deteriorate over time.Lifetime warranty.We cannot guarantee that this product will fit with all aftermarket intakes. Please note if you have the extra spout on your inlet pipe as seen in the picture below then this part will now fit your vehiclePlease note that the 2021 Engine may have some differences due to the map sensor and turbo charger coupler difference, please study the pictures below, if your map sensor and screw type coupler look like this pictured below, FMDV9 and FMDV18 are not compatible. In The Box:1x Atmospheric Dump Valve1x Boost Tap / Take Off (Including Cork Gasket and Screws)1x Throttle Body Coupler with Dump Valve Thread1 x Uprated Spring (To be used when the engine is mapped)1x Hose Coupler1x Threaded Blanking Plug1x Silicone Hose (Red, Blue or Black)3x Hose Clamps2x Bolts1x Roll of Vacuum Tubing1x Wiring Loom Extension

£231.44£192.87 (ex. VAT)

Forge Hard Pipe with Single Valve and Kit for BMW 335

Forge

We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerSuitable for the BMW 335 fitted with the N54 Twin Turbo engine. This alloy hard pipe fits to the throttle body and incorporates our high flow blow off valve. This valve, fresh from our R&D department, is the largest displacement valve that Forge have ever made! Featuring a 50mm (2”) aluminium piston so that there are no issues with split diaphragms, we have not found the power handling limits of this valve yet!The piston uses heat stabilised viton o-rings and high temperature grease to ensure a long life with minimal wear and very long service intervals.In The Box:1 x FMBM335DV1 Valve1 x Alloy Throttle Body Hard Pipe 1 x Silicone Reducer2 x Silicone Straight Blanks Hoses (25mm)2 x 30mm Hose Clamps1 x 80mm Hose Clamp1 x 90mm Hose Clamp2x M6 x 12 Socket Cap Bolts1 x M6 x 16 Socket Cap Bolts1 x M6 Penny Washer2 x M6 Plain Washer1 x USB Instructions1 x Forge Keyring, Bottle Opener and StickerNote: that due to the high flow and low restriction offered by the 50mm valve, they are very quiet in operation.If you require a different spring setup, please see here

£439.01£365.84 (ex. VAT)