Fits:Escort MK3Escort MK4Fiesta MK3Sierra CosworthsSecures bottom of battery.Most Mk3/4 Escorts require 2 clamps to secure battery, one at the front and one on the side of the battery.Comes complete with stainless steel Allen key bolt and washer.
£11.02£9.18 (ex. VAT)
Fits: Fiesta MK2Fiesta MK4Fiesta MK5PumaEscort Mk4Escort Mk5Escort Mk6 Brake Reservoir Cap Cover (to complement brake reservoir cover).Made from mirror finish stainless steel and polished to a mirror finish.
£16.54£13.78 (ex. VAT)
Fits:Escort Series 1 RS TurboEscort Series 2 RS TurboMade in stainless steel.The original Ford mild steel clamps are often cracked on the edges, this usually is down the age of the clamps and tightening up of the injectors, its worth checking your original clamps to make sure there not broken.Comes with stainless fixings.
£16.54£13.78 (ex. VAT)
Fits:Escort RS Turbo Series 2Helps redirect water away from air filter & alternatorLaser cut to complement the shape of original vents.
£24.80£20.67 (ex. VAT)
Fits:Escort Series 1 RS TurboEscort Series 2 RS TurboBrake Servo modified support bracket, fittings included, durable brush finish looks great on concours or road cars.Made from 3mm stainless steel, over double the thickness of the original Ford bracket and this one want rust!The original Ford bracket is only 1.5mm thick and over 15 years old, this can lead to the brake servo moving more than it should causing brake pedal to have more travel than it should, with our double thickness bracket this movement is greatly reduced and in some case really make a huge difference, especially when the original bracket is simply missing? Check yours today it could be missing or cracked?
£27.56£22.97 (ex. VAT)
Fits:CVHZVHStainless CVH oil filler cap replacement (not cover) with engraved oil can logo.Double 'o' ring securing system, stops cap blowing off.Also has Allen key on side of cap to secure for extra sealing power!A must for modified CVH & ZVH engines, no more engines covered in oil after the oil cap has blown off!
£33.02£27.52 (ex. VAT)
Fits:ZetecCVHDipstick handle - stainless mirror finish with engraved oil level logo.Easy fit, comes with Allen key securing grub screw.To fit, simply cut top off original dipstick handle, slide on new dipstick handle and tighten grub screw.
£33.02£27.52 (ex. VAT)
Fits:Escort Series 1 RS TurboReplaces standard Ford bracket.Supports inlet manifold, bolts onto middle part of manifold and back of engine cylinder head.Takes only a couple of minutes to fit, made from quality stainless steel then polished to perfection.
£33.08£27.57 (ex. VAT)
Fits:Escort Series 1 RS TurboEscort Series 2 RS TurboManifold heat shield and logo. Made from quality stainless steel with laser cut logo.Keeps extreme turbo temperatures away from plug leads, preventing misfires from cooked HT leads, great heat barrier protection for fast road and track cars.No drilling required bolts onto manifold.4mm laser cut and bent flange bolts directly to 3 of the studs on the manifold and then place the top shield section onto the 4mm flange and secure with bolts provided.
£35.28£29.40 (ex. VAT)
Fits:Escort Series 1 RS TurboMade from 4mm thick stainless steel, laser cut, bent and then polished all over for that concours finish.Will not fit S2 RS Turbo.
£35.28£29.40 (ex. VAT)
Fits:Fiesta MK2Fiesta MK3Escort MK3Escort MK4Escort MK5 including CosworthRelease the heat! Polished bonnet spacer blocks with logo and stainless fittingsFitting takes approx 10 to 20 minutes simply remove the 2x bolts securing your bonnet hinges onto your bonnet then place a spacer block in between your bonnet hinge and the bonnet then install new longer stainless bolts and washers provided.These spacer blocks have been designed for track cars and fast road, they raise the back of you cars bonnet up so that all the HOT air is released helping your car run cooler which in return should mean more POWER.We have even made them with a aerodynamic shape, more for stying but every little helps.Please note these are Machined Alloy Finish.
£38.54£32.12 (ex. VAT)
Fits:Escort Series 1 RS TurboNo more collapsed boost hoses & looks great fitted.Please choose from options list which of the above you require. To fit cut your original top pipe and allow enough of your old pipe to go over your new stainless induction pipe.
£49.61£41.34 (ex. VAT)
Fits:Escort Series 1 RS TurboEscort Series 2 RS TurboA perfect modification for big BHP RS Turbos, light weight design.Helps remove trapped air in coolant system, this trapped air in the coolant can lead to hot spots on the cylinder head which can eventually lead to possible cooling issues.Please note S1/S2 turbo swirl pots are highly polished alloy.
£104.68£87.23 (ex. VAT)
Fits:Escort Series 1 RS TurboEscort Series 2 RS TurboOil Breather system S1/S2 RS Turbo. Helps engine breathe easier if running big BHP or standard.S1/S2 RS turbo oil separators are highly polished aluminium.Full fitting kit is available which includes blue silicone hoses cut to approx size and high quality stainless steel Jubilee clips.
£126.79£105.66 (ex. VAT)
Fits:Escort Series 1 RS TurboEscort Series 2 RS TurboCurved tops to give a stronger weld and improve overall look and finish.Replace that cracked discoloured Ford plastic tank with a highly polished Auto Specialists tank.Series 1 header tank comes with water level sensor application on side of tank.
£175.30£146.08 (ex. VAT)