Fits:all Focus MK2 including ST'sSurround has cut out for bonnet ajar switch.Fitting is really simple, remove old bonnet latch bolts fit new stainless latch surround and secure with new stainless bolts provided.
£18.74£15.62 (ex. VAT)
Fits:Focus ST & all Mk2 models from 2008 on-wardsWing rail covers, fit over existing plastic trims.To fit simply remove black plastic screws with inserts, place new stainless covers on then replace plastic screws & inserts to secure.
£24.80£20.67 (ex. VAT)
Fits:Focus MK2 RSBattery cover top trim with FRS 'Focus RS' logo.This battery top trim fits over original battery cover and is secured by x4 m5 button head Allen key bolts.Easy fit, takes 5 minutes to fit.Ultimate Green battery cover available separately.
£24.80£20.67 (ex. VAT)
Fits:Focus MK2 RSStainless steel fuel injector cover.Covers the injector wiring and multi plugs, simply bolts onto cam cover bolts to secure.Easy fit, takes about 5-10 minutes to fit.
£28.66£23.88 (ex. VAT)
Fits:Focus MK2Fiesta MK7Fiesta MK8 (Including STs)New! Brake reservoir cap cover with information logo'sA must for any show car! or detailed road cars.Please note, this cap is machine from alloy not stainless steel
£33.02£27.52 (ex. VAT)
Fits:Focus MK2 modelsFocus MK3 modelsThe ultimate water header tank cap cover with HOT logo.Simply fit over existing water header tank, has grooved inside for excellent fit. Please note when fitting you may want to add a bit of glue inside the cap just to make sure.
£33.02£27.52 (ex. VAT)
Fits:Focus MK2Fiesta MK 6 & 7Large round washer stopper with washer logo and double 'O' ring securing system.To fit, remove old washer cap and simply push new polished washer stopper in place.Please note these are made from CNC billet alloy and polished to a mirror finish.
£33.02£27.52 (ex. VAT)
Fits:Focus MK2Pro-Series Satin Black Water header tank cap cover with HOT! logo, fits over top of original Ford header tank cap.Grooved inside for perfect fit! Made from solid billet alloy.Totally original finish, anodised satin black alloy and engraved logo which show up in silver.
£33.02£27.52 (ex. VAT)
Fits:Focus MK2Pro-Series Satin Black round washer bottle stopper with washer logo,'o' ring securing system.Grooved inside for perfect fit! Made from solid billet alloy.Totally original finish, anodised satin black alloy and engraved logo which show up in silver.
£33.02£27.52 (ex. VAT)
Fits:All Cosworths with original yellow plastic dip stickFocus MK2Aluminium dipstick handle. Easy fit, takes about 5 minutes to fit and looks great!Fitting: Cut the top off the original yellow dipstick handle then slide the aluminium handle on and then tighten grub screw located on the side of the stainless handle.Made from quality aluminium, comes with grub screw securing system.
£38.54£32.12 (ex. VAT)
Fits:Fiesta MK7 and 7.5 including ST180MK2 FocusAfter being very popular for other Ford models, Auto Specialists are pleased to announce their bonnet spacer kitThe spacers raise the rear of the bonnet up by 23mm and can be fitted within 30 minutes with special inverted bolts.HOW DO THEY FIT? Lift the bonnet up and put a soft cloth under the bottom corner of the bonnet and then one side at a time remove the 2 x 10mm bolts attaching the bonnet hinge to the bonnet, discard the old bolts and install the billet spacer block and use new inverted bolts to secure. It's that easy!A great low cost way to change the look of your Fiesta and release high under bonnet temperatures for fast road or track use.2 x Billet spacers and complete with stainless fixings.
£38.54£32.12 (ex. VAT)
Fits:Focus MK2Machined to look like the original only better, made from quality alloy and polished to perfection.This is a replacement part not a cover.
£38.55£32.13 (ex. VAT)
Fits:Focus MK2Focus MK3Enhance your engine bay in a matter of seconds!Made from top quality 1.6mm stainless steel with laser cut logo's and then expertly polished to mirror finish.This cover fits over existing plastic fuse box lid and is secured by high strength double sided adhesive tape.
£43.00£35.83 (ex. VAT)
Fits:ST225 - AutoSpecialists Group 'a' air-filter ONLYThe group 'A' open air-filter kit has been a great addition to the ST225, problem was lack of cold air, AutoSpecialists has come up with the solution, factory looking Air-ram system that gives you just as much cold air as a Focus RS!Please note, this currently only fits AutoSpecialists Group 'a' air-filterKit includes:1x Alloy fabricated Air-ram feed finished in Pro-Series satin black3x Billet alloy spacers and stainless fittingsOptional RS slam panel, available for Face lift and pre-facelift models
£47.20£39.33 (ex. VAT)
Fits:Focus MK2HOT logo cap cover available too, please choose from options to add to your order.This cover has been made to the highest standard and can only be described as THE ULTIMATE WATER HEADER TANK COVER.To fit, remove water header tank cap and install new stainless cover, your water cap will hold tank cover on but you can use some sealer for extra security.
£66.15£55.13 (ex. VAT)
Fits:Focus MK2 (2005-2012)This kit is an extremely easy modification to make to your Focus,Replace the stock bonnet prop with the bonnet lifter kit .Designed for: Focus Mk2 pre and post facelift versions availableKit includes:2 x Gas-charged struts2 x Bonnet hinge brackets2 x Wing brackets
£77.12£64.27 (ex. VAT)
Fits:Focus RS MK2Covers up that ugly Ford plastic ECU cover, simply sticks onto original with double sided adhesive which is provided in the kit.Handmade 2 piece ECU cover. The ultimate finishing touch to your MK2 RS.Takes minutes to fit!
£93.71£78.09 (ex. VAT)
Fits:Focus RS MK2Complete under bonnet plate kit 14 piecesMade form 304 stainless steel and laser cut to look and fit properly.Includes vent surrounds, make your MK2 RS stand out from the crowd.
£121.28£101.07 (ex. VAT)
Fits:Focus MK2Focus MK2 Light-Weight Alloy Water Header Tank replacement, polished to a mirror finish.Easy fit takes 20 to 30 minutes, comes with a brand new high pressure header tank cap.No drilling required (unlike other alloy tanks), uses original fixing points and is a direct replacement for the original ford plastic header tank.Why not cover up that plastic cap with a polished stainless steel cap cover, finished in satin black and engraved 'Hot' Logo. Grooved inside for that perfect fit.
£188.95£157.46 (ex. VAT)