Engine Parts

Ford Duratec 16V Vernier Pulley

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.M6 Cap Head adjustment Bolts are factory tightened to: 12 Nm. Ensure to tighten pulley bolt to the manufacturers torque wrench setting.MANUFACTURER: FordPRODUCTTYPE: Vernier Pulleys

£185.76£154.80 (ex. VAT)

Ford Duratec Single Valve Spring Kit Inc Caps

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Ford Duratec Spring and Cap Set Single Valve SpringsCRUSHHEIGHTMM: 23.5FITTEDLENGTHMM: 38MANUFACTURER: FordNOMINALINTERNALDIAMETER: 18.08NOMINALOUTSIDEDIAMETER: 25.6PRODUCTTYPE: Valve SpringsRATELBF: 242RATENMM: 42SEATPRESSUREKG: 22SEATPRESSURELBF: 48SPRINGTYPE: Single

£287.36£239.47 (ex. VAT)

Newman Cams Sigma, Zetec, Focus, Fiesta, Phase 2 - FORS/260/300 PH2 (pair) (1)

Newman Cams

This Listing is for a brand new set of Race Camshafts (FORS/294/400 PH5)Fits the following vehicles:Ford Sigma,Zetec,Focus,Fiesta, 1.25/1.4/1.6 16 ValveA Race Cam Giving Power from 4500 to 8500.Power Band: 4500 - 8500Duration In: 294.0Duration Ex: 284.0Valve Lift In: 0.39Valve Lift Ex: 0.37Cam Lift In: 0.4Cam Lift Ex: 0.38Timing In: 39-75Timing Ex: 70-34Full Lift In: 108.0Full Lift Ex: 108.0Valve In: 0.008Valve Ex: 0.01Material Type: BlankRocker Ratio: 1:1.0These are the same camshaft brand that we would use in our workshops.

£408.00£340.00 (ex. VAT)

Newman Cams Sigma, Zetec, Focus, Fiesta, Phase 5 - FORS/294/400 PH5 (pair)

Newman Cams

This Listing is for a brand new set of Camshafts (FORS/260/300 PH2)Fits the following vehicles:Ford Sigma,Zetec,Focus,Fiesta, 1.25/1.4/1.6 16 ValveGood mid range power will not run on standard injection, requires ECU reprogrammeApplication = Fast Road CamPower Band = 2500-7250rpmCam Lift Inlet = 7.61mmCam Lift Exhaust= 7.61mmDuration Inlet = 260 DegreeDuration Exhaust= 260 DegreeThese are the same camshaft brand that we would use in our workshops.

£408.00£340.00 (ex. VAT)

Ford Duratec Double Set Valve Springs

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Double Valve Spring Kit To Suit Ford Duratec Engines. Kit Includes SC22 Caps, Seats & Seals.CRUSHHEIGHTMM: 22.27FITTEDLENGTHMM: 38MANUFACTURER: FordNOMINALINTERNALDIAMETER: 15.5NOMINALOUTSIDEDIAMETER: 28.5PRODUCTTYPE: Valve SpringsRATELBF: 297RATENMM: 52SEATPRESSUREKG: 20SEATPRESSURELBF: 45SPRINGTYPE: Double

£533.45£444.54 (ex. VAT)

Newman Cams Camshafts - Ford Duratec ST150

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new pair of camshafts to fit any Ford Fiesta ST150 cylinder head. These are the same camshaft brand that we would use on any ST150 that we build or work on in our workshops. They give excellent power gains across the rev range and have been proven with additional mods to release up to and above 200bhp.Please see the data sheet on their website for more details.Newman ST150 Camshaft Specification Information. Profile: Valve Lift: Duration: 278/375 Inlet Cam 9.52mm 278 Degrees 278/375 Exhaust Cam 9.52mm 278 DegreesPlease be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£576.00£480.00 (ex. VAT)

Newman Cams Sigma, Zetec, Focus, Fiesta, Phase 2 - FORS/260/300 PH2 (pair)

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This Listing is for a brand new set of Camshafts (FORS/260/300 PH2)Fits the following vehicles:Ford Sigma,Zetec,Focus,Fiesta, 1.25/1.4/1.6 16 ValveGood mid range power will not run on standard injection, requires ECU reprogrammeApplication = Fast Road CamPower Band = 2500-7250rpmCam Lift Inlet = 7.61mmCam Lift Exhaust= 7.61mmDuration Inlet = 260 DegreeDuration Exhaust= 260 DegreeThese are the same camshaft brand that we would use in our workshops.

£576.00£480.00 (ex. VAT)

Newman Cams Sigma, Zetec, Focus, Fiesta, Phase 1 - FORS/240/280 PH1 (pair)

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This Listing is for a brand new set of Camshafts (FORS/240/280 PH1)Fits the following vehicles:Ford Sigma,Zetec,Focus,Fiesta, 1.25/1.4/1.6 16 ValveLow Mid Range Power, Will Run on Std Injection System.Power Band: 2000 - 6000Duration In: 240.0Duration Ex: 240.0Valve Lift In: 0.27Valve Lift Ex: 0.27Cam Lift In: 0.28Cam Lift Ex: 0.28Timing In: 10-50Timing Ex: 50-10Full Lift In: 110.0Full Lift Ex: 110.0Valve In: 0.008Valve Ex: 0.01Material Type: BlankRocker Ratio: 1:1.0These are the same camshaft brand that we would use in our workshops.

£576.00£480.00 (ex. VAT)

Newman Cams Sigma, Zetec, Focus, Fiesta, Phase 3 - FORS/274/325 PH3 (pair)

Newman Cams

This product is made to order, please allow 7-14 working days for dispatch. This Listing is for a brand new set of Camshafts (FORS/274/325 PH3)Fits the following vehicles:Ford Sigma,Zetec,Focus,Fiesta, 1.25/1.4/1.6 16 ValveA Fast Road Rally Cam good mid upper range power.Power Band: 3000 - 7500Duration In: 274.0Duration Ex: 274.0Valve Lift In: 0.34Valve Lift Ex: 0.34Cam Lift In: 0.325Cam Lift Ex: 0.325Timing In: 32-68Timing Ex: 70-30Full Lift In: 108.0Full Lift Ex: 110.0Valve In: 0.008Valve Ex: 0.01Material Type: BlankRocker Ratio: 1:1.0These are the same camshaft brand that we would use in our workshops.

£576.00£480.00 (ex. VAT)

Camshaft - Ultimate Road (Ford Duratec 1.8 / 2.0 / 2.3 16V)

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: 1892.Application: -Unit Type: Blank.For use with throttle bodies.Note: Not suitable for use with standard O.E. valve springs. Piper VSSDUR Valve Spring & Cap set must be used.Note: 1892 is the hottest profile which can be fitted without machining pistons.APPLICATION: Ultimate RoadDURATIONEXHAUST: 288°DURATIONINLET: 296°FULLEXHAUSTLIFT: 104°FULLINLETLIFT: 102°MANUFACTURER: fordPOWERBAND: 3000-7000POWERINCREASE: -PRODUCTTYPE: CamshaftTDCEXHAUSTLIFT: .116" 2.95mmTDCINLETLIFT: .154" 3.91mmTIMINGEXHAUST: 68 – 40TIMINGINLET: 46 – 70VALVEEXHAUSTCLEARANCE: .012" .30mmVALVEEXHAUSTLIFT: .420" 10.67mmVALVEINLETCLEARANCE: .010" .25mmVALVEINLETLIFT: .460" 11.68mm

£631.95£526.63 (ex. VAT)

Camshaft - Rally (Ford Duratec 1.8 / 2.0 / 2.3 16V)

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: BP300.Application: Rally.Unit Type: Blank.Note: For use with throttle bodies.Note: Piper VSSDUR springs must be used with this camshaft profile.Note: Piper PULSDUR vernier pulleys must be used with this camshaft profileNote: Additional machining to the pistons required with this profile.APPLICATION: RallyDURATIONEXHAUST: 288°DURATIONINLET: 296°FULLEXHAUSTLIFT: 104°FULLINLETLIFT: 102°MANUFACTURER: FordPOWERBAND: 3000-8000POWERINCREASE: -PRODUCTTYPE: CamshaftTDCEXHAUSTLIFT: .130" 3.30mmTDCINLETLIFT: .165" 4.19mmTIMINGEXHAUST: 68 – 40TIMINGINLET: 46 – 70VALVEEXHAUSTCLEARANCE: .012" .30mmVALVEEXHAUSTLIFT: .458" 11.64mmVALVEINLETCLEARANCE: .010" .25mmVALVEINLETLIFT: .490" 12.45mm

£631.95£526.63 (ex. VAT)

Camshaft - Fast Road (Ford Duratec 1.8 / 2.0 / 2.3 16V)

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: BP270.Application: Fast Road.Unit Type: Blank.Straight forward installation.Suitable with O.E. Valve Springs.APPLICATION: Fast RoadDURATIONEXHAUST: 244°DURATIONINLET: 260°FULLINLETLIFT: 113°MANUFACTURER: FordPOWERBAND: 1800-6800POWERINCREASE: 12BHPPRODUCTTYPE: CamshaftTDCEXHAUSTLIFT: .034" 0.87mmTDCINLETLIFT: .034" 0.87mmTIMINGEXHAUST: 48 – 17TIMINGINLET: 17 – 63VALVEEXHAUSTCLEARANCE: .010" .25mmVALVEEXHAUSTLIFT: .348" 8.84mmVALVEINLETCLEARANCE: .008" .20mmVALVEINLETLIFT: .383" 9.73mm

£631.96£526.63 (ex. VAT)

Camshaft - Race (Ford Duratec 1.8 / 2.0 / 2.3 16V)

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: 2170.Application: National Hot Rod.\nUnit Type: Blank.For use with throttle bodies.Note: Not suitable for use with standard O.E. Springs. Piper VDSDUR Spring Kit must be used.Note: Additional machining to the pistons required with this profile.APPLICATION: RaceDURATIONEXHAUST: 272°DURATIONINLET: 280°FULLEXHAUSTLIFT: 104°FULLINLETLIFT: 104°MANUFACTURER: FordPOWERBAND: 2500-7800POWERINCREASE: -PRODUCTTYPE: CamshaftTDCEXHAUSTLIFT: .126" 3.20mmTDCINLETLIFT: .152" 3.85mmTIMINGEXHAUST: 60 – 32TIMINGINLET: 36 – 64VALVEEXHAUSTCLEARANCE: .010" .25mmVALVEEXHAUSTLIFT: 450" 11.42mmVALVEINLETCLEARANCE: 008" .20mmVALVEINLETLIFT: 492" 12.49mm

£632.00£526.67 (ex. VAT)

Ford Duratec 1.8 / 2.0 / 2.3 16v Cam Kit

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: 1892.Application: -Unit Type: Blank.For use with throttle bodies.Camshaft Kit to suite Ford Duratec1.8 / 2.0 / 2.3 16v Engines.Kit Includes: Timing Disc, Cam Lube, Piper Valve Springs & Cap Set VSSDURNote: 1892 is the hottest profile which can be fitted without machining pistons.CAMSHAFTCODE: DUR1892BMANUFACTURER: FordPRODUCTTYPE: CamKit

£906.26£755.22 (ex. VAT)

Ford Duratec 1.8 / 2.0 / 2.3 16v Cam Kit - KBDURBP285

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: BP285.Application: Ultimate Road.Unit Type: Blank.Camshaft Kit to suite Ford Duratec  1.8 / 2.0 / 2.3 16v  Engines.Kit Includes: Timing Disc, Cam Lube, Piper Valve Springs & Cap Set VSSDURNote: Additional machining to the pistons required with this profile.Note: For use with throttle bodies.CAMSHAFTCODE: DURBP285BMANUFACTURER: FordPRODUCTTYPE: CamKit

£906.26£755.22 (ex. VAT)

Ford Duratec 1.8 / 2.0 / 2.3 16v Cam Kit - KBDURBP270

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: BP270.Application: Fast Road.Unit Type: Blank.Camshaft Kit to suite Ford Duratec  1.8 / 2.0 / 2.3 16v  Engines.Kit Includes: Timing Disc, Cam Lube, Piper Valve Springs & Cap Set VSSDURMANUFACTURER: FordPRODUCTTYPE: CamKit

£906.26£755.22 (ex. VAT)

Ford Duratec 1.8 / 2.0 / 2.3 16v Cam Kit - KBDUR2170

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: 2170.Application: National Hot Rod.Unit Type: Blank.For use with throttle bodies.Camshaft Kit to suite Ford Duratec  1.8 / 2.0 / 2.3 16v  Engines.Kit Includes: Timing Disc, Cam Lube, Piper Valve Springs & Cap Set VSSDURNote: Additional machining to the pistons is required for this profile.CAMSHAFTCODE: DUR2170BMANUFACTURER: FordPRODUCTTYPE: CamKit

£1,141.16£950.97 (ex. VAT)

Ford Duratec 1.8 / 2.0 / 2.3 16v Cam Kit - KBDURBP300

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: BP300.Application: Rally.Unit Type: Blank.Camshaft Kit to suite Ford Duratec  1.8 / 2.0 / 2.3 16v  Engines.Kit Includes: Timing Disc, Cam Lube, Piper Valve Springs & Cap Set VDSDURKNote: Additional machining to the pistons required with this profile.Note: For use with throttle bodies.CAMSHAFTCODE: DURBP300BMANUFACTURER: FordPRODUCTTYPE: CamKit

£1,141.16£950.97 (ex. VAT)

Ford Duratec 1.8 / 2.0 / 2.3 16v Cam Kit - KBDURBP320

Piper Cams

These are made to order, please allow 7-10 working days for dispatch.Profile: BP320.Application: Race.Unit Type: Blank.Camshaft Kit to suite Ford Duratec  1.8 / 2.0 / 2.3 16v  Engines.Kit Includes: Timing Disc, Cam Lube, Piper Valve Springs & Cap Set VDSDURKNote: Additional machining to the pistons required with this profile.Note: For use with throttle bodies.CAMSHAFTCODE: DURBP320BMANUFACTURER: FordPRODUCTTYPE: Camkit

£1,141.16£950.97 (ex. VAT)