COBB Accessport V3 - Ford Mustang 2.3 EcoBoost

COBB Tuning

COBB Accessport V3 - Ford Mustang 2.3 EcoBoost

Tunes available:
(Further custom tuning by E-Mail comes free if required)

 

MSD 320 (430NM / 317+PS)
This is a calibration that mimics the vehicles standard power and torque but retains all the awesome COBB Firmware features and MSD's legendary driveability!. This was created specifically for use with MSD Multimaps and is ideal for Multimaps slot 1!



MSD 340+ (510NM / 340+PS)

This calibration works perfectly on a totally standard car and lifts the power restrictions from within the ECU, further enhancing the power output to 510NM and 340PS.

The factory rev limit and all the temperature protection features of the management system are retained, whilst the relevant fuel, spark and load tables are further optimised to achieve this new power output.

Rest assured that if your coolant, oil, exhaust or charge temperatures get too high, the ECU will actively lower your available throttle opening and boost pressures as well as add fuel to cool things down until such time as the temperatures are back within safety parameters. Full LSPI / Knock control is retained at factory safety levels. Some tuners remove all this capability in order to achieve their power - Take care out there.



MSD360. (550NM / 360PS)
Coming Soon...


MSD360 is only suitable for vehicles already fitted with the following items:

  • Uprated intercooler 
  • 3 Stainless Steel Full Exhaust System
  • Catalytic Converter Replacement Pipe / Sports Cat
  • Performance Air Filter and intake kit
  • Denso ITV-22 or NGK LTR7IX-11 Spark Plug



MSD 380 MSD 550
Further power is available for suitably equipped cars (Forged engine and GTX2867R for example). These tunes can be done remotely but are outside the scope of a simple webshop form. Please contact us for more details.


Personalisations Available: (At time of programming)

  • Decat MIL Eliminated (For vehicle with a De-Cat fitted)
  • Eco shift light disable.
  • Shift assist disable.
                                  

All of our Accessport calibrations come with the following awesome feature's enabled:

Flat foot shifting:
Enabled on all our calibrations, this features allows the accelerator pedal to stay fully depressed while shifting gears. The use of the clutch pedal will still be necessary, but keeping the accelerator pedal fully depressed between shifts allows for the turbo to stay spooled between gears, so you can concentrate on the fastest gearshift and let MSD take care of the engine speed.


No hassle launch control:
No more entering menus in a hurry! With our calibrations the process of getting into launch mode is simply having the clutch pedal and accelerator pedal depressed fully. The engine speed will quickly raise to the determined RPM set in the calibration file. (Adjustable on request)


5-way launch control set-points:
This feature enables users to switch between 5 different launch control set points on the fly. You can use the factory cruise control system to switch between different set points.
Our calibrations usually have 5 set points enabled from 4500rpm in slot 1 to 5500rpm in slot 5. (Slot choice varies due to other features)



Burnout Mode:
This feature enables users to perform a nice controlled burnout with a simple button press on the steering wheel. Just hit the button and mash your foot to the floor for an ECU controlled flat foot burnout.


Transbrake:(AT vehicles only)
Launch control for the auto transmission cars! Engage transbrake and mash the pedal. Just release the brake to launch!! 


MSD Multimaps: (Optional, at extra cost)
A firm favourite... This feature gives you 3 different power levels available at any one time. Imagine having MSD 320 (STD Power with enhanced MSD driveability and all our features), MSD 340, A valet mode and an AntiTheft device, all switchable from the cruise control buttons, even with the engine running. Imagine also being able to dictate which of those power levels the vehicle loaded up with when you turn it on Well you can. Ask us about MSD Multimaps.


MSD Custom tuning, remotely!
Using the awesome data logging capabilities of the Accessport, we invite you to send us datalogs via E-mail so that we can custom tune your purchased calibration to better suit your own, individual vehicle. After log analysis, we will send you a further optimised tune that is based of feedback from your own vehicle. This feature comes standard with all our tunes for those owners who wish to get involved in some customisation but don't worry, you can enjoy the product forever without getting involved in custom tuning should you wish to.

All our calibrations come with full printed instructions further detailing the above features and how to do the datalogging for your custom tuning and the first couple of revisions are included in your purchase price. (We normally only need the two...)

(Anti-Theft and Valet modes are now also available on request in slots 4 and 5.)


Click here to see some videos of the Accessport in action on our website.
(Accessport install / datalogging / gauges / Flat foot shifting / Multimaps etc)


Features of the COBB Accessport V3

  • Larger, full colour, higher resolution screen
  • Customisable multi-gauge display
  • In vehicle mount, with on/off switch
  • Faster and easier to use with a familiar face
  • Interchangeable faceplate's

AP3-FOR-003_gallery_01.jpg


MPN: C-AP3-FOR-003

Product Code: C-AP3-FOR-003-1
£0.00
£0.00 (ex. VAT)
£793.50
£661.25 (ex. VAT)
£0.00
£0.00 (ex. VAT)
£793.50
£661.25 (ex. VAT)
Earn 794 reward points

Availability: In stock

Availability: Sorry! We're out of stock

COBB Accessport V3 - Ford Mustang 2.3 EcoBoost

Recommend to a friend

DELIVERY & RETURNS