Garrett Intercooler for a Ford Focus ST 2.0L 2013-2018


Part Number: 880736-6001The Garrett® direct fit Ford Focus ST performance charge air cooler boasts a 115% larger core that helps reduce intake manifold temperatures by an average of 11 °F (6.1 °C) based on OBD II data.Optimized end tanks improve air flow through the core. This performance intercooler showed an increase of up to 25 HP (19 kW) and 9 lb-ft (12 N-m) of torque compared to OE during back to back dyno comparisons in a wind tunnel which generates air velocity that matches vehicle speed.During testing the heat saturation point increased from 4 dyno pulls to 8 dyno pulls.This direct fit performance intercooler installs in 1.5 hours and can support up to 670 HP (499 kW) all while reusing the stock bolts, hoses, and clamps. This intercooler also features an integrated drain plug to allow removal of condensation buildup.FeaturesSupports up to 670 HP (499 kW)115% larger core than stockInstalls in stock locationAverage 11 °F (6.1 °C) reduction in intake temperature based on OBD II dataIntegrated drain plug to evacuate condensationCast aluminum end tanksAdvanced offset fin designBar-and-plate constructionInstall Instructions: Click HereNote:For customers outside of North America, MAP sensor BV61-9F479-AA must be purchased separately and used for installation to ensure a proper fit.

£567.00£472.50 (ex. VAT)

Garrett Powermax direct fit turbocharger 2013 2018 Ford 2.0L Ecoboost with blow off valve option


The Garrett PowerMax Stage 1 turbocharger upgrade for the 2013 2018 2.0L Ford EcoBoost engine platform is engineered to increase engine performance capability while maintaining OEM installation specifications.This direct drop-in turbocharger provides up to 16% more flow than OEM and will support up to 350 BHP* (260kW). Improvements in compressor efficiency and flow can be attributed to the 52mm fully-machined compressor wheel with advanced aero design.Inconel alloy turbine wheel and stainless steel turbine housings are rated for up to 950° C.This turbocharger kit comes fully assembled, calibrated, and is outline interchangeable with the OE hardware to ensure a perfect fit every time.WARNING: The maximum allowable turbocharger speed is 214.9 krpm.The use of this product above 214.9krpm is at the owners risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor port is machined into the compressor housing for the fitment of speed sensor part numbers 781328-0001 (includes sensor and gauge), and 781328-0002 (includes speed sensor). Speed sensors sold separately.*Performance results of this product are highly dependent upon your vehicles modifications and tuning/calibration. The target power has been calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel power.These are normally available for shipping within 5 working days from order.

£1,090.56£908.80 (ex. VAT)

Recently Viewed

No items found.