Focus MK3 - Non ST/RS

QUICK VIEW

Steeda Focus ST / RS clutch assist spring

Steeda

Many Focus owners have found that taking out the stock OE spring will give you somewhat similar results, but most owners fail to realize the prolonged effects of simply taking out your factory OE spring and not replacing it with another spring. By eliminating the clutch spring, your clutch pedal will never fully return to stock position and over time your slave cylinder may begin leaking due to constant pressure on its seals. But don't worry! Steeda has your back.Our Steeda Focus ST/RS Clutch Spring Kit completely replaces the factory spring and is honed in on just the right amount of spring rate to get you the perfect clutch pedal feel you look for in your Focus. This assist spring is manufactured from piano wire that naturally has high tensile strength and high elastic qualities. Our piano wire spring ensures a consistent spring rate and minimal sag even after repeated use. The Steeda Focus Clutch Spring Kit allows you to feel exactly when clutch engages and disengages, making shifting a breeze.Note: Spring perch is not included.For those who want the ease of installation of a "Perch and All" kit, we offer the 555-7031 kit which includes a new perch and comes PRE-ASSEMBLED. Just select from the drop down menu above!Product Benefits:Improve clutch pedal engagement feelPiano wire construction with high tensile strength and high elastic qualitiesComplete replacement of factory clutch springAvoid slave cylinder damage due to removal of stock clutch springSteeda quality, backed by a LIFETIME warrantyPre-Assembled kit including spring perch availablePart No:555-7028 - spring only555-7031 - Pre-Assembled Spring and Spring Perch kitFitment: All Focus MK3 inc ST & RS

£22.50£18.75 (ex. VAT)
QUICK VIEW

Steeda OBD II cover

Steeda

This OBD II port cover will ward-off any dealers or shops from reprogramming your vehicle, which would over write your aftermarket performance tune and render your expensive tuner useless. Made from high grade billet aluminium, this piece wont break like a plastic cover could.This piece is simple to install and installation only takes a few seconds. Easily removes to access the port at a later time.Note:This piece is designed for a precise and snug fit. A bit of force may be needed when installing on some vehicles.Product BenefitsHard anodized and laser engravedPrevents technicians from flashing your computer without telling youFits ANY OBD II equipped vehicle [dependent on port placement]Part: 555-1260

£33.00£27.50 (ex. VAT)

Steeda OBD II cover

This OBD II port cover will ward-off any dealers or shops from reprogramming your vehicle, which would over write your aftermarket performance tune an...
£33.00
View details
QUICK VIEW

Steeda Focus 5 speed short throw shifter bracket

Steeda

It does not require any permanent modifications and reduces the shifter throw thirty five percent!Milled in house from billet steel, then TIG welded, and finally nickel plated for strength and corrosion resistance in the USA. It is an easy, cost effective upgrade that comes with stainless steel mounting hardware and instructions.Product Benefits    Thirty five percent throw reduction    Can be used with or without the Steeda Tri-Ax shifter    No permanent modifications required for installationNB- This product fits all Focus MK3 5 speed manual models only.The bracket is part of the Steeda Focus Tri-Ax shifter & does not need to be purchased separately if buying a shifter.Steeda part: 555-7237INSTALL GUIDE- CLICK HERE

£89.17£74.31 (ex. VAT)
QUICK VIEW

Steeda Focus Performance springs

Steeda

Steeda Focus Lowering Springs for the 2012-2013 Focus are CNC wound in the United States with high tensile strength chrome-silicon spring wire. They are then heat treated, shot peened, re-heat treated, and finally powder-coated to ensure no spring sag during over the course of their service life, while also providing excellent corrosion resistance.Put real handling into your Focus with Steeda Focus Lowering Springs for 2012-2013 Focus. These precision-engineered springs lower the Focus 1" in the front and. 0.8" in the rear to lower the center of gravity, and improve overall vehicle appearance. Greatly improves the feel of the uninspiring factory suspension spring rates by improving traction , reducing built in understeer, and improving cornering ability.One of the important aspects of Steeda Focus Lowering Springs for 2012-2013 Focus is the front to rear balance. Like most front wheel drive cars the Focus is prone to severe understeer when pushed to the limit. Steeda springs increase the rear spring rate proportionally more than they increase the front spring rate. This reduces the understeer considerably, while still being conservative enough to produce mild understeer at the limit so that the car is easy to drive.Product FeaturesReduced body rollLess nose diveIncrease tractionReduce understeer considerablyOverall improved handlingComes with a LIFETIME warrantyNOTE: Does NOT Fit Focus ST or RSTime of Install4 Hours Level of DifficultyTech Recommended Tools NeededShop ToolsSteeda part: 555-8301

£166.80£139.00 (ex. VAT)
QUICK VIEW

Steeda Focus Rear anti roll bar

Steeda

This high quality swaybar is constructed from super strong, and lightweight, chrome moly steel. The laser cut steel ends offer a superior strength over traditional stamped ends that create a weak point in your swaybar.  This Steeda swaybar kit includes replacement polyurethane bushings and bushing brackets.   Product Benefits100% stiffer than stock swaybar20% lighter than stock swaybarImprove vehicle handlingTime of Install45 Minutes Level of DifficultyEasy Tools NeededBasic Tools Steeda part: 555-1075FITS:Focus MK3 2012+Focus ST 2005Does not fit MK3 Focus ST or RS

£199.00£165.83 (ex. VAT)