Newman Cams

Motorsport Developments is your one stop shop for Newman Cams products. We stock a large selection of Newman Cams and fast, next day delivery is our specialty. We have the independent reviews to back it up. Plus, as a Newman Cams master dealer we are able to arrange a fast dropship direct from them to your door for any products we don't have in stock. 


YB Camshaft Spacers

Newman Cams

1x Brand new camshaft spacer ring to convert Cosworth 4WD cams to enable fitment into a 2WD cylinder head.This is a brand new camshaft spacer ring to fit any Ford Sierra or Escort Cosworth YB 2WD that is fitted with cams intended for a 4WD cylinder head. These are the same spacers that we would use on any power YB that we build or work on in our workshops.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£8.99£7.49 (ex. VAT)

YB Camshaft Spacers

1x Brand new camshaft spacer ring to convert Cosworth 4WD cams to enable fitment into a 2WD cylinder head.This is a brand new camshaft spacer ring to ...
£8.99

Newman Cams Cosworth YB Double Valve Springs

Newman Cams

There are no cylinder head modifications required to fit these springs to your head.This is a brand new set of 16 double valve springs that will fit all Ford Cosworth YB 16 valve cylinder heads. These are the same components we would fit should you require them fitting in our workshop and we usually use them with BD14, 15 and 16 cams.There are 32 springs in this package. 16x large outers and 16x small inners.The original spring retainers and collets are re-used with these.

£192.00£160.00 (ex. VAT)

Newman Cams Ford camshaft. FORS/274/325 PH3

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. BD12 Cosworth inlet camshaftCam suited for road use - good idle and little loss of low down power.Power Band: 1500 - 6000Duration In: 247.0Duration Ex: 247.0Valve Lift In: 0.331Valve Lift Ex: 0.331Cam Lift In: 0.331Cam Lift Ex: 0.331Timing In: 9-58Timing Ex: 53-14Full Lift In: 115.0Full Lift Ex: 110.0Lift In: .010"Lift Ex: .017"Valve In: HYDValve Ex: HYD

£210.00£175.00 (ex. VAT)

Newman Cams BD10 Cosworth Inlet Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£228.00£190.00 (ex. VAT)

Newman Cams Road Supercharged Cam for Mini

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. A Cam developed for the Supercharged Cooper S Engine giving good increased mid range torque,without affecting the tick over.Power Band: 1500 - 6000Duration In: 246.0Duration Ex: 264.0Valve Lift In: 0.423Valve Lift Ex: 0.396Cam Lift In: 0.258Cam Lift Ex: 0.242Timing In: 14-52Timing Ex: 70-22Full Lift Ex: 114.0Lift In: N/ALift Ex: N/AValve In: HYDValve Ex: HYDMaterial Type: BlankRocker Ratio: 1:1.64 Inlet 1.44 Inlet

£270.00£225.00 (ex. VAT)

Newman Cams Race Supercharged Cam for Mini

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. A Cam developed for the Supercharged Cooper S Engine For Fast Road Competition Use.Power Band: 3000 - 7000Duration In: 264.0Duration Ex: 272.0Valve Lift In: 0.4Valve Lift Ex: 0.402Cam Lift In: 0.244Cam Lift Ex: 0.245Timing In: 18-68Timing Ex: 73-25Full Lift Ex: 114.0Lift In: N/ALift Ex: N/AValve In: HYDValve Ex: HYDMaterial Type: BlankRocker Ratio: 1:1.64 Inlet 1.44 Inlet

£270.00£225.00 (ex. VAT)

Newman Cams Road Cam for Mini

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. Good Increase of Low Mid Range Power Smooth Idle For Non Supercharged Engines.Power Band: 2000 - 6500Duration In: 264.0Duration Ex: 262.0Valve Lift In: 0.402Valve Lift Ex: 0.423Cam Lift In: 0.245Cam Lift Ex: 0.258Timing In: 18-68Timing Ex: 68-18Full Lift Ex: 114.0Lift In: N/ALift Ex: N/AValve In: HYDValve Ex: HYDMaterial Type: BlankRocker Ratio: 1:1.64 Inlet 1.44 Inlet

£270.00£225.00 (ex. VAT)

Newman Cams Fast Road/Tarmac Rally for Mini

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. Fast Road/Tarmac Rally Race Cam For Non Supercharged Engines.Power Band: 3500 - 7500Duration In: 288.0Duration Ex: 288.0Valve Lift In: 0.41Valve Lift Ex: 0.41Cam Lift In: 0.285Cam Lift Ex: 0.25Timing In: 34-74Timing Ex: 74-34Full Lift Ex: 110.0Lift In: N/ALift Ex: N/AValve In: HYDValve Ex: HYDMaterial Type: BlankRocker Ratio: 1:1.64 Inlet 1.44 Inlet

£270.00£225.00 (ex. VAT)

Newman Cams Fast Road Supercharged for Mini

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. A Cam developed for the Supercharged Cooper S Engine Giving good increased mid range torque,without affecting the tickover.Power Band: 2000 - 6500Duration In: 250.0Duration Ex: 268.0Valve Lift In: 0.423Valve Lift Ex: 0.396Cam Lift In: 0.258Cam Lift Ex: 0.242Timing In: 14-52Timing Ex: 70-22Full Lift Ex: 114.0Lift In: N/ALift Ex: N/AValve In: HYDValve Ex: HYDMaterial Type: BlankRocker Ratio: 1:1.64 Inlet 1.44 Inlet

£270.00£225.00 (ex. VAT)

Newman Cams Race Cam

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. A Cam developed for the Track.Power Band: 4500 - 8250Duration In: 300.0Duration Ex: 300.0Valve Lift In: 0.472Valve Lift Ex: 0.426Cam Lift In: 0.288Cam Lift Ex: 0.26Timing In: 35-75Timing Ex: 75-35Full Lift Ex: 110.0Lift In: N/ALift Ex: N/AValve In: HYDValve Ex: HYDMaterial Type: BlankRocker Ratio: 1:1.64 Inlet 1.44 Inlet

£270.00£225.00 (ex. VAT)

Newman Cams Race Cam

These are made to order, please allow 7-14 working days for dispatch. A Cam developed for the Track.Power Band: 4500 - 8250Duration In: 300.0Duration ...
£270.00

Newman Cams BD12 Cosworth Inlet Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. BD12 Cosworth inlet camshaftCam suited for road use - good idle and little loss of low down power.Power Band: 1500 - 6000Duration In: 247.0Duration Ex: 247.0Valve Lift In: 0.331Valve Lift Ex: 0.331Cam Lift In: 0.331Cam Lift Ex: 0.331Timing In: 9-58Timing Ex: 53-14Full Lift In: 115.0Full Lift Ex: 110.0Lift In: .010"Lift Ex: .017"Valve In: HYDValve Ex: HYD

£288.00£240.00 (ex. VAT)

Newman Cams BD10 Cosworth Exhaust Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams BD16 Cosworth Exhaust Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams BD16+ Cosworth Exhaust Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams BD14 Cosworth 4WD Exhaust Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This camshaft is for a 4WD Cosworth head but fits 2WD heads with the use of a spacer (not included)It is manufactured by Newman Cams who are the manufacturer we choose to fit in house when we are modifying Cosworths.Please note that this is NOT a cheap regrind as offered by some companies. This is a BRAND NEW item ground from a blank.

£288.00£240.00 (ex. VAT)

Newman Cams BD8 Cosworth Standard Exhaust Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams BD15 Cosworth Exhaust Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information.BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams BD15 Cosworth Inlet Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams BD16+ Cosworth Inlet Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams Fast Road Cosworth Exhaust Camshaft

These are made to order, please allow 7-14 working days for dispatch. 1x Brand new fast road exhaust camshaft to suit the Cosworth YB 4WD cylinder head. This is Newman's equivalent to the well known AB07 CamThis is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information.BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams BD14 Cosworth Inlet Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information.BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2wd head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams BD16 Cosworth Inlet Camshaft

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams Fast Road Cosworth Inlet Camshaft 256/350

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. 1x Brand new fast road inlet camshaft to suit the cosworth YB 4WD cylinder head. This is Newman's equivalent to the well known AB07 cam.This is a brand new camshaft to fit any Ford Sierra or Escort Cosworth YB 4WD cylinder head.These are the same camshaft brand that we would use on any power YB that we build or work on in our workshops.Newman YB Cosworth camshaft specification information:BD10 8.55mm 264 DegreesBD14 8.91mm 261 DegreesBD15 10.03mm 258 DegreesBD16 10.13mm 265 DegreesBD16+ 10.48mm 265 DegreesThis 4WD camshaft will fit in any 2WD head with the addition of a 6.50 spacer ring that we keep in stock at most times.BD14 and above may require valve pockets in your pistons as well as double valve springs to ensure the valves are controlled properly.Please be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£288.00£240.00 (ex. VAT)

Newman Cams Sigma, Zetec, Focus, Fiesta, Phase 5 - FORS/294/400 PH5 (pair.)

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This Listing is for a brand new set of Race Camshafts (FORS/294/400 PH5)Fits the following vehicles:Ford Sigma,Zetec,Focus,Fiesta, 1.25/1.4/1.6 16 ValveA Race Cam Giving Power from 4500 to 8500.Power Band: 4500 - 8500Duration In: 294.0Duration Ex: 284.0Valve Lift In: 0.39Valve Lift Ex: 0.37Cam Lift In: 0.4Cam Lift Ex: 0.38Timing In: 39-75Timing Ex: 70-34Full Lift In: 108.0Full Lift Ex: 108.0Valve In: 0.008Valve Ex: 0.01Material Type: BlankRocker Ratio: 1:1.0These are the same camshaft brand that we would use in our workshops.

£576.00£480.00 (ex. VAT)

Newman Cams Camshafts - Ford Duratec ST150

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This is a brand new pair of camshafts to fit any Ford Fiesta ST150 cylinder head. These are the same camshaft brand that we would use on any ST150 that we build or work on in our workshops. They give excellent power gains across the rev range and have been proven with additional mods to release up to and above 200bhp.Please see the data sheet on their website for more details.Newman ST150 Camshaft Specification Information. Profile: Valve Lift: Duration: 278/375 Inlet Cam 9.52mm 278 Degrees 278/375 Exhaust Cam 9.52mm 278 DegreesPlease be aware that these products move fast and we do not always have stock as often our workshop has taken them out of stock for fitment in house. Even If we don't have any in stock, we can have it with you fast, direct from the manufacturer. Always enquire if you are in a desperate hurry to receive them.

£576.00£480.00 (ex. VAT)

Newman Cams Sigma, Zetec, Focus, Fiesta, Phase 2 - FORS/260/300 PH2 (pair)

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This Listing is for a brand new set of Camshafts (FORS/260/300 PH2)Fits the following vehicles:Ford Sigma,Zetec,Focus,Fiesta, 1.25/1.4/1.6 16 ValveGood mid range power will not run on standard injection, requires ECU reprogrammeApplication = Fast Road CamPower Band = 2500-7250rpmCam Lift Inlet = 7.61mmCam Lift Exhaust= 7.61mmDuration Inlet = 260 DegreeDuration Exhaust= 260 DegreeThese are the same camshaft brand that we would use in our workshops.

£576.00£480.00 (ex. VAT)

Newman Cams Sigma, Zetec, Focus, Fiesta, Phase 1 - FORS/240/280 PH1 (pair)

Newman Cams

These are made to order, please allow 7-14 working days for dispatch. This Listing is for a brand new set of Camshafts (FORS/240/280 PH1)Fits the following vehicles:Ford Sigma,Zetec,Focus,Fiesta, 1.25/1.4/1.6 16 ValveLow Mid Range Power, Will Run on Std Injection System.Power Band: 2000 - 6000Duration In: 240.0Duration Ex: 240.0Valve Lift In: 0.27Valve Lift Ex: 0.27Cam Lift In: 0.28Cam Lift Ex: 0.28Timing In: 10-50Timing Ex: 50-10Full Lift In: 110.0Full Lift Ex: 110.0Valve In: 0.008Valve Ex: 0.01Material Type: BlankRocker Ratio: 1:1.0These are the same camshaft brand that we would use in our workshops.

£576.00£480.00 (ex. VAT)