All of our Accessport MSD calibrations come with the following awesome feature's enabled:
Custom tuning for all, remotely!
Using the awesome data logging capabilities of the Accessport, we invite you to send us datalogs via E-mail so that we can custom tune your purchased calibration to better suit your own, individual vehicle. After log analysis, we will send you a further optimised tune that is based on feedback from your own vehicle. This feature comes standard with all our tunes for those owners who wish to get involved in some customisation but don't worry, you can enjoy the product forever without getting involved in custom tuning should you wish to.
All our calibrations come with full printed instructions further detailing the above features and how to do the datalogging for your custom tuning and the first couple of revisions are included in your purchase price. (We normally only need the two...)
Return to standard tune yourself. (FOC)
The Accessport enables you to return the original ECU calibration back to the vehicle at the click of a button. Selecting "Uninstall Accessport" will remove any tune applied by it and return the vehicle to its original tune and place your custom tune back on the Accessport, leaving it in an as new condition ready to be sold on. This can be done yourself at home with no tuner input required.
Flat foot shifting: (FOC)
Enabled on all our calibrations, this features allows the accelerator pedal to stay fully depressed while shifting gears. The use of the clutch pedal will still be necessary, but keeping the accelerator pedal fully depressed between shifts allows for the turbo to stay spooled between gears, so you can concentrate on the fastest gear-shift and let MSD take care of the engine speed.
No hassle launch control: (FOC)
With our calibrations the process of getting into launch mode is simply having the clutch pedal and accelerator pedal depressed fully. The engine speed will quickly raise to the determined RPM set in the calibration file. (Adjustable on request)
5-way launch control set-points: (FOC)
This feature enables users to switch between 5 different launch control set points on the fly. You can use the factory cruise control system to switch between different set points. Our calibrations usually have 5 set points enabled from 4500rpm in slot 1 to 5500rpm in slot 5. (Slot choice varies due to other features)
Burnout Mode: (FOC)
This feature enables users to perform a nice controlled burnout with a simple button press on the steering wheel. Just hit the button and mash your foot to the floor for an ECU controlled flat foot burnout.
MSD-Trac / COBB Traction control:
COBB Traction Control is a custom feature available only with the Accessport. It doesn't involve any extra sensors, installation, or hard part changes. This makes it easy to improve road course or straight line track times on completely stock EcoBoosts, highly modified race cars, or any other supported Ford in between. Essentially, if your wheels are uncontrollably spinning at any time during any race, this feature can help, and when bought from MSD it has a few of our own enhancements added too.
Eco Shift light disable. (Optional & FOC)
Some people really dislike the Ecoboost economy shift lights and would like them disabled.
Just say the word and they are turned out forever! But the Performance shift lights remain and are improved upon! Disabling this will automatically enable the MSD peak performance shift light. (See below)
MSD peak performance shift up light. (FOC)
If the Eco Shift light is disabled we will utilise the shift up light with enhanced programming to now indicate the optimal performance gear up-shift point. The rev limiter warning light will remain active later in the rev range as normal. (Eco up-shift lights must be disabled for this feature to work)
Start / Stop system disable. (Optional & FOC)
Some people turn the start stop system off as the first thing they do when they get in the car.
Just say the word and we will disable it permanently for you, but leave you the option to re-enable it in your Accessport.
Shift Assist disable. (Optional & FOC)
Ford installed a shift assist strategy that hangs the throttle momentarily on gear shifts, which is designed to help the gearbox sync a little better for some drivers. Many owners really dislike it and wish it didn't do it. Just say the word and its gone.
Diagnostic and data-logging capability: (FOC)
Don't forget, the Accessport gives you the ability to diagnose management faults properly. Entering the diagnostics section of the handset will allow you to retrieve the full range of Ford fault codes. (Not just generic P-Codes like a cheap eBay reader) The icing on the cake is its high speed data-logger, allowing you to display and log over 200 engine parameters. This is the feature that unlocks the custom E-Tuning capability! Please see the Accessport tab for more details
MSD Custom tuning, remotely! (FOC)
Using the awesome data logging capabilities of the Accessport, we invite you to send us data-logs via E-mail so that we can custom tune your purchased calibration to better suit your own, individual vehicle. After log analysis, we will send you a further optimised tune that is based of feedback from your own vehicle. This feature comes standard with all our tunes for those owners who wish to get involved in some customisation and two revisions come free of charge with every MSD Tune. But don't worry, you can enjoy the product forever without getting involved in custom tuning should you wish to.
Links:
Click here to visit our Ford Focus ST Mk3 dedicated tuning webpage for more detailed information