Show All Products - Fiesta Mk3 Incl RS Turbo

Ford Fiesta RS Turbo Temperature Gauge Sender Unit

Motorsport Developments

Fits:Fiesta RS TurboBeware of cheap universal items that are floating around that never read more than 3/4 hot, if your CVH is overheating you need to know about it and fast!These are the same sender unit we would use on any power CVH that we build or work on in our workshops and have proved to be very reliable in our experience.NOTE:Please ignore the coloured banding on the photo, we use the same photo for all our senders, you will receive the correct one.

£10.50£8.75 (ex. VAT)

NGK BKR8EIX Iridium spark plug

NGK

NGK Iridium Spark Plug BKR8EIX (2668)Please be sure to check the 'Specifications' tab, where applicable, to help confirm suitability for your vehicle or engine. This advert is for 1 plug. 

£11.00£9.17 (ex. VAT)

NGK BKR9EIX Iridium spark plug

NGK

NGK Iridium Spark Plug BKR9EIX (2669)Please be sure to check the 'Specifications' tab, where applicable, to help confirm suitability for your vehicle or engine. This advert is for 1 plug. 

£11.00£9.17 (ex. VAT)

Denso Iridium IK27 Spark Plug (1 plug)

Denso

Suitable for all Cosworth YB 250 > 500 BHP and CVH (all power levels)Improved Horse Power Get more power with an optimal combustion cycle.IRIDIUM POWER has a low required voltage and a high ignitability, resulting in less misfiring and no spark, the outcome being a dramatic improvement in combustion. Engine output is thus increased. The findings of a bench test using a motorcycle engine to show the improved combustion from IRIDIUM POWER is shown on the below. Compared to normal plugs, a 0.5ps (1.4%) improvement is seen in output at 110km/h.Improved Acceleration Increased response and acceleration performance.IRIDIUM POWER best demonstrates its performance improvement during acceleration.IRIDIUM POWER has a 0.4 mm diameter iridium center electrode and a specially shaped ground electrode. These features combine to achieve higher ignitability and require lower spark voltage than ever before. This enables high-response driving with fewer misfires than under higher required voltage spark conditions, and fewer misfires when ignitability is difficult. As a result, acceleration improves in comparison with normal plugs.Improved Fuel Economy Even during idling ignition is assured, with less fuel consumption and less noise.The good ignitability from the fine electrode (0.4mm) of IRIDIUM POWER draws out much more performance from the engine. Comparing a normal plug (W20FS-U) with an IRIDIUM POWER(IWF22) on a 2 cycle 50cc engine, fuel consumption improved from 41.74km/L -> 43.69km/L, an improvement of about 5%.Note: Mileage measured using a chassis dynamo; actual driving results under normal conditions may vary.

£11.50£9.58 (ex. VAT)

Escort / Fiesta RS Turbo 82 Degree Thermostat

Motorsport Developments

Fits:Escort & Fiesta RS TurbosThis product will drop the water temperature in your engine from its standard 88 degrees, perfect for those tuned cars, especially in the summer.

£13.00£10.83 (ex. VAT)

Powerflex Exhaust Mount - EXH001

Powerflex

Fits:Ford KA (1996-2008)Ford Sapphire Cosworth 2WDFord Sierra RS CosworthFord Sierra Sapphire Cosworth 4WDFord Escort RS Cosworth (1992-1996)Ford Escort RS Turbo Series 1Ford Escort RS Turbo Series 2Ford Escort MK5,6 RS2000 4X4 (1992-96)Ford Escort MK5,6 & 7 inc RS2000 (1990-2001)Ford Escort Mk3 & 4, XR3i, Orion All Types (1980-1990)Ford Escort Mk2 (1974-1981)Ford Escort Mk1 (1968-1975)Ford Capri (1969-1986)Rover Metro GTi Rover 100Peugeot 306Ford Sierra XR4i (1983-1985)XR4x4 (1985-1992)Ford Sierra & Sapphire Non-Cosworth (1982-1994)Ford Fiesta Mk1 & 2 All Types (1976-1989)Ford Fiesta Mk3 (1989-1996) inc RS Turbo, XR2i and RS1800 16VPlease check Quantity needed Per vehicle 

£16.14£13.45 (ex. VAT)

Uprated Escort / Fiesta RS Turbo Fan Switch

Motorsport Developments

Fits:Ford Escort & Fiesta CVH RS Turbo modelsAs many of you will know, the CVH cooling system suffers from 2 main faults with regards fan activation.It runs too hot before the fans kick in The wiring to the switch is very poor and corrodes badly, leading tointermittent fans or non at all.When the fans work, they come on a little to late in our opinion and then often go off when the engine is still a little too hot. If you are on the standard radiator and intercooler it is not always too much of a problem, but put an aftermarket radiator and front mounted intercooler on there and see how close to overheating the engine gets!! Also, the poor wiring adds to your problems as the fan not coming in at all doesn't help matters in the slightest.We now have a solution to BOTH problems...This will switch on your fans at around 5 - 7 degrees C earlier than the original switch did, and switch them off with the engine slightly cooler too.This is an essential upgrade for anyone with front mounted intercooler or in fact anything that's making the cooling system work harder. We have developed this switch in house to meet our own criteria and it comes with a simple spade fitting making it very simple to connect up to your vehicles wiring harness as the wires can be connected any way around.Please Note:The switch you receive may be a different colour to the one picturedThe plug must be cut off your loom to enable use of this fan switch

£19.99£16.66 (ex. VAT)

CVH Cambelt

Gates

1x Genuine Gates Powergrip Cambelt to fit all Ford Escort Rs Turbos.This is a brand new cambelt that will fit all Ford Escort CVH Turbo engines. This is the same belt we would use on any power CVH that we build or work on. Its made by Gates, the same company who make them for Ford in the first place. Don't skimp hereDon't be fooled into buying and fitting substandard products by people selling them whom don't work on these cars. We have worked on these cars for in excess of ten years and only sell parts we are willing to fit ourselves.

£22.00£18.33 (ex. VAT)

CVH Cambelt

1x Genuine Gates Powergrip Cambelt to fit all Ford Escort Rs Turbos.This is a brand new cambelt that will fit all Ford Escort CVH Turbo engines. This ...
£22.00

CVH Gates Cambelt

Gates

1x Genuine Gates Powergrip Cambelt to fit all Ford Fiesta Rs Turbos.This is a brand new cambelt that will fit all Ford Fiesta CVH Turbo engines. This is the same belt we would use on any power CVH that we build or work on. Its made by Gates, the same company who make them for Ford in the first place. Don't skimp here!

£22.00£18.33 (ex. VAT)

CVH Gates Cambelt

1x Genuine Gates Powergrip Cambelt to fit all Ford Fiesta Rs Turbos.This is a brand new cambelt that will fit all Ford Fiesta CVH Turbo engines. This ...
£22.00

AS Oil Filler Cap for CVH

Airtec / Autospecialist

Fits:CVHZVHStainless CVH oil filler cap replacement (not cover) with engraved oil can logo.Double 'o' ring securing system, stops cap blowing off.Also has Allen key on side of cap to secure for extra sealing power!A must for modified CVH & ZVH engines, no more engines covered in oil after the oil cap has blown off!

£33.02£27.52 (ex. VAT)

AS Oil Filler Cap for CVH

Fits:CVHZVHStainless CVH oil filler cap replacement (not cover) with engraved oil can logo.Double 'o' ring securing system, stops cap blowing off.Also...
£33.02

AS Stainless Dipstick Handle - Small for CVH & Zetec

Airtec / Autospecialist

Fits:ZetecCVHDipstick handle - stainless mirror finish with engraved oil level logo.Easy fit, comes with Allen key securing grub screw.To fit, simply cut top off original dipstick handle, slide on new dipstick handle and tighten grub screw.

£33.02£27.52 (ex. VAT)

AS Spark Plug Lead Cover for Zetec

Airtec / Autospecialist

Fits:All Black Top and Silver Top Zetec engine'sDoes not fit ST170.Available with Zetec logo or in Plain, includes full fitting kit.Fittings inc. 4 machined alloy spacers and 4 stainless bolts and washers.This is not just a push on cover, it bolts on with alloy spacers to provide correct fitting and will not vibrate or fall off like stick on covers.

£35.28£29.40 (ex. VAT)

AS Bonnet Spacer Blocks - MK2/3 Fiesta, MK3/4/5 Escort & Cosworth Models

Airtec / Autospecialist

Fits:Fiesta MK2Fiesta MK3Escort MK3Escort MK4Escort MK5 including CosworthRelease the heat! Polished bonnet spacer blocks with logo and stainless fittingsFitting takes approx 10 to 20 minutes simply remove the 2x bolts securing your bonnet hinges onto your bonnet then place a spacer block in between your bonnet hinge and the bonnet then install new longer stainless bolts and washers provided.These spacer blocks have been designed for track cars and fast road, they raise the back of you cars bonnet up so that all the HOT air is released helping your car run cooler which in return should mean more POWER.We have even made them with a aerodynamic shape, more for stying but every little helps.Please note these are Machined Alloy Finish.

£38.54£32.12 (ex. VAT)

RS Turbo ZVH Cam Belt Tensioner

Motorsport Developments

FitsAll Ford CVH / Zetec ZVH conversionsThis is a brand new cam belt tensioner that will fit all Ford Escort & Fiesta ZVH engines. The standard Zetec or CVH tensioners don't fit the ZVH conversions, this is the correct one that you need. This is the same tensioner we would use on any power ZVH that we build or work on. DON'T SKIMP ON THESE ITEMS!Don't be fooled into buying and fitting substandard products by people selling them whom don't work on these cars. We have worked on these cars for years and only sell parts we are willing to fit ourselves.

£41.00£34.17 (ex. VAT)

Powerflex Front Wishbone Rear Bush 46mm - PFF19-601BLK

Powerflex

Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Please note these bushes will not fit the ST24 or ST200 models.OEM Part Number: 1829508The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle.Quantity per car - x2

£41.94£34.95 (ex. VAT)

ZVH Cambelt & Tensioner Kit

Gates

1x Genuine Gates Powergrip Camshaft drive belt and Tensioner.Both to fit any Ford ZVH Conversion.This is a brand new cambelt & tensioner that will fit all Ford Escort & Fiesta ZVH engines. The standard Zetec or CVH tensioners don't fit the ZVH conversions, this is the correct one that you need. This is the same belt & tensioner we would use on any power ZVH that we build or work on. DON'T SKIMP ON THESE ITEMS!

£51.00£42.50 (ex. VAT)