Focus MK3 RS

QUICK VIEW

Steeda Focus ST / RS clutch assist spring

Steeda

Many Focus owners have found that taking out the stock OE spring will give you somewhat similar results, but most owners fail to realize the prolonged effects of simply taking out your factory OE spring and not replacing it with another spring. By eliminating the clutch spring, your clutch pedal will never fully return to stock position and over time your slave cylinder may begin leaking due to constant pressure on its seals. But don't worry! Steeda has your back.Our Steeda Focus ST/RS Clutch Spring Kit completely replaces the factory spring and is honed in on just the right amount of spring rate to get you the perfect clutch pedal feel you look for in your Focus. This assist spring is manufactured from piano wire that naturally has high tensile strength and high elastic qualities. Our piano wire spring ensures a consistent spring rate and minimal sag even after repeated use. The Steeda Focus Clutch Spring Kit allows you to feel exactly when clutch engages and disengages, making shifting a breeze.Note: Spring perch is not included.For those who want the ease of installation of a "Perch and All" kit, we offer the 555-7031 kit which includes a new perch and comes PRE-ASSEMBLED. Just select from the drop down menu above!Product Benefits:Improve clutch pedal engagement feelPiano wire construction with high tensile strength and high elastic qualitiesComplete replacement of factory clutch springAvoid slave cylinder damage due to removal of stock clutch springSteeda quality, backed by a LIFETIME warrantyPre-Assembled kit including spring perch availablePart No:555-7028 - spring only555-7031 - Pre-Assembled Spring and Spring Perch kitFitment: All Focus MK3 inc ST & RS

£22.50£18.75 (ex. VAT)
QUICK VIEW

Steeda OBD II cover

Steeda

This OBD II port cover will ward-off any dealers or shops from reprogramming your vehicle, which would over write your aftermarket performance tune and render your expensive tuner useless. Made from high grade billet aluminium, this piece wont break like a plastic cover could.This piece is simple to install and installation only takes a few seconds. Easily removes to access the port at a later time.Note:This piece is designed for a precise and snug fit. A bit of force may be needed when installing on some vehicles.Product BenefitsHard anodized and laser engravedPrevents technicians from flashing your computer without telling youFits ANY OBD II equipped vehicle [dependent on port placement]Part: 555-1260

£33.00£27.50 (ex. VAT)

Steeda OBD II cover

This OBD II port cover will ward-off any dealers or shops from reprogramming your vehicle, which would over write your aftermarket performance tune an...
£33.00
View details
QUICK VIEW

Steeda 9MM Hollow point valve stem caps

Steeda

Steeda 9mm Hollow Point Valve Stem Caps machined from billet 6061-T6 aluminum and have a rubber o-ring installed for a positive seal. Available in black finish too. Give your wheels killer looks!Note: Sold in a set of 4.Part:555-0217     - polished finish555-0217-B - black finish

£38.00£31.67 (ex. VAT)
QUICK VIEW

Steeda Focus Aluminium dead pedal (left hand drive fitment)

Steeda

We use aerospace quality 6061 billet aluminium to carve this dead pedal from a solid piece of aluminium.Buy with confidence, your Steeda Focus dead pedal is backed by Steeda's LIFETIME WARRANTY.Steeda proudly manufactures our products in the United States out of our Valdosta, Georgia manufacturing plant.Product Benefits Premium quality aerospace aluminiumFully made in the United StatesInstalls with basic toolsFits Vehicle Models  - NOTE: FIT for LEFT HAND DRIVE ONLYSteeda Part: 555-12652012+ Ford Focus - All models inc ST & RS

£44.70£37.25 (ex. VAT)
QUICK VIEW

Steeda Focus ST / RS & Fiesta ST transmission cable bushing kit

Steeda

The bracket that secures your Focus ST or Focus RS & Fiesta ST shifter cables, uses soft rubber bushings that give your shifting unnecessary flex. Steeda's Focus Transmission Cable Bracket Bushings fix this problem.Improve the feel of your Focus shifting with this CNC machined, billet Transmission Cable Bracket Bushings. These bushings are designed to be a direct replacement and will give you a more precise feel and shift.Product BenefitsImproves shifter feelInexpensive way to increase shifting performanceMade from billet 6061 aluminumMPN: 555-7061Fitment:Focus MK3 ST & RSFiesta MK7 ST

£49.00£40.83 (ex. VAT)
QUICK VIEW

Steeda MK3+ Focus Accelerator pedal spacer ST/RS/ ALL (2013-2018 )

Steeda

Steeda's billet 6061 aluminum Accelerator Spacer is a lightweight upgrade that won't lighten your wallet. Install is an easy 15 minute parking lot procedure requiring a 13mm socket, extension and ratchet handle.The Mk3 Focus is a well designed, solid performer that could use a little help in stock form to take full advantage of the car's full performance potential. Steeda's US manufactured spacer is a new product developed to make your daily driving experience more pleasurable and improve your lap times at the track.The Mk3 Focus ST and RS have a glaring error when it comes to the accelerator pedal height. When compared to the brake pedal, the accelerator pedal height makes it nearly impossible to heel and toe rev-match properly. Steeda's 3/8" thick spacer moves the accelerator pedal out closer in plane with the brake pedal for easier heel and toe rev-match. This equates to faster speed through the corners as well as perfect launches from a dead stop.Product features:Optimal spacing for heel and toe shiftsLightweight 6061 solid billet constructionSpaces gas pedal out 3/8" for better reachPart: 555-1281STEEDA INSTALL TIP: If the studs are not long enough to tighten up sufficiently it usually means you have the spacer the wrong way round! Make sure it is fitted securely and correctly.

£49.99£41.66 (ex. VAT)
QUICK VIEW

Steeda Focus Polished fuse box cover plate

Steeda

Steeda Focus Polished Fuse Box Cover Plate for 2012-2018 MK3 Ford Focus is designed to enhance the appearance of your Focus engine bay. The polished stainless steel plate stands out in the engine bay and will set you apart from other Focus owners in car shows.Our Steeda Focus Polished Fuse Box Cover Plate for 2012-2018 Focus is made from stainless steel and is precision laser cut using CNC machinery for a perfect fit. The fuse box cover plate adheres securily to your fuse box cover using the included tube of premium grade silicone adhesive and will not peel off like other covers that use double sided adhesive tape. This high quality piece is made in the U.S.A. and installs in just minutes!Product Benefits    Made from high grade polished stainless steel    Easy to install    A nice dress up piece for your engine bay Time of Install5 MinutesLevel of DifficultyEasy Tools NeededNo ToolsSteeda part: 555-0682Note: This product fits all Focus models.

£50.54£42.12 (ex. VAT)
QUICK VIEW

Steeda Focus ST/RS pedal kit

Steeda

Steeda Focus Premium Aluminum Pedal kit or race focussed Heel/Toe Pedal Kit for 2013-2018 MK3 Ford Focus ST and 2016+ RS is designed to enhance the appearance of your Focus ST/RS interior. The added width to the accelerator pedal for the race application allows for easier manipulation between the go pedal and the brake pedal.This pedal kit is perfect match to the Steeda billet dead pedal (Dead pedal is LHD only fitment)Our Steeda Focus Premium Aluminum Heel/Toe Pedal Kit is made from aerospace quality 6061 billet aluminum, in our manufacturing plant in Valdosta, Georgia. We take so much confidence in our manufacturing and quality of products that we are proud to offer a LIFETIME WARRANTY on these Steeda Focus Heel/Toe Pedal Kit.Product BenefitsWider gas pedal allows for easy manipulation of gas and brake pedalPremium quality aerospace aluminumInstalls with basic toolsLifetime Steeda WarrantyPart:555-1266 - Regular Pedal Kit555-1267 - Heel / Toe Pedal KitINSTALL GUIDE - CLICK HERE

£60.95£50.79 (ex. VAT)
QUICK VIEW

Steeda Focus MK3 Billet interior hood latch

Steeda

This Steeda Ford Focus mk3 Billet Aluminium Interior Hood Latch will look great on the inside of your Focus, including the Focus ST and Focus RS and is available in plain billet (i.e silver) or anodized red or black to match your interior scheme.Our Focus Billet Aluminium Interior Hood Latch was designed to completely replace your flimsy factory plastic interior hood latch. We took our design a step further by redesigning the shape of this lever to be more ergonomic - the stock interior lever is a flat plastic piece that could make it hard to gain leverage to pull it and pop your hood. With our Steeda interior hood latch you will notice popping the hood is easier due to the curvature of the billet piece.After continued use during mod installation you may find the OEM latch to have more play, on the verge of breaking or has actually broken. Steeda has engineered a great solution to your interior hood latch problems - by replacing your stock interior hood latch with our billet aluminium replacement you can prevent any mishaps in the future.We have created this interior latch from lightweight and strong aluminium to assure it never breaks again. Designed and manufactured in our facility in Valdosta, Georgia you can ensure this aluminium interior hood latch is nothing short of the quality you've come to expect from Steeda!Product BenefitsManufactured out of billet aluminum for strength and longevityAvailable: POLISHED, RED or BLACK finishesCurved design gives you more leverage when popping your hoodAdds style to your Focus mk3 interiorEasy bolt-on installationMade in the USALifetime Steeda WarrantyPart Number:555-1248 - Billet 555-1248-R - Red555-1248-B - Black

£62.99£52.49 (ex. VAT)
QUICK VIEW

Steeda Focus ST / RS shifter base bushing kit

Steeda

Improve the feel of your Focus ST or RS shifter with this CNC machined, Steeda Focus Shifter Base Bushing Kit. Your shifter uses soft rubber bushings that give your shifter flex. These bushings are designed to be a direct replacement and will give you a more precise feel and shift.Product BenefitsImproves shifter feelInexpensive way to increase shifting performanceMade from billet 6061 aluminumMPN: 555-7060

£64.00£53.33 (ex. VAT)
QUICK VIEW

Steeda Focus anodized billet Aluminium hood latch

Steeda

Our Steeda Focus Anodized Billet Aluminium Hood Latch are available in anodized Red or Black or polished aluminium. The hood latch mounts directly to the OEM location using the OEM spring. Our hood latch comes with our Steeda lifetime warranty.Product BenefitsManufactured from 6061 Aluminium for strengthAnodized red looks great under the hoodDirect fit, OEM replacementMade in the USAPart Numbers:RED:    555-0693 BLACK: 555-0694POLISHED: 555-0695Fitment: Focus mk3 inc ST & RS

£74.70£62.25 (ex. VAT)
QUICK VIEW

Steeda Focus ST Anodized billet aluminium hood latch

Steeda

Our hood latches will also look great when showing off your Ecoboost powerhouse's engine bay..... hopefully featuring a bunch of Steeda power boosting goodies!Our Steeda Focus ST Anodized Billet Aluminium Hood Latch are available in Anodized Black with a laser engraved ST logo and plain aluminium with an engraved ST logo. The hood latch mounts directly to the OEM location using the OEM spring. Our hood latch comes with our Steeda lifetime warranty.Product Benefits Manufactured from 6061 Aluminium for strengthAnodized red looks great under the hoodDirect fit, OEM replacementMade in the USAPart Numbers:BLACK: 555-0691POLISHED: 555-0692

£74.70£62.25 (ex. VAT)
QUICK VIEW

Steeda Focus / Mondeo Blue replacement cone filter element

Steeda

This is the same style Cone Filter Element that is included with all of Steeda's Focus and Mondeo Cold Air Intakes. Having a spare filter element allows for zero downtime while cleaning your cold air intake system. Comes pre-oiled in blue. The filter element also comes with a new clamp.Cold Air Intake Fitment:555-3169555-3213555-3214Product BenefitsEasy to cleanHigh flow filterMillion mile warrantySwap in while you clean your existing filterPart:281-0009

£89.00£74.17 (ex. VAT)
QUICK VIEW

Steeda Focus ST/ RS throttle body spacer

Steeda

The swirl design helps promote airflow by breaking the surface tension of the incoming air. An increase of horsepower and fuel mileage can be seen with this part. Kit includes instructions, gaskets and mounting hardware.INSTALLATION GUIDE HEREProduct BenefitsIncreased horsepower and torque: 6 hp and 11 ft/lbs tq!Increased fuel economyMade from high quality billet aluminiumFits Vehicle ModelsMK3 Focus ST (petrol only)MK3 Focus RSPart Number: 555-3185

£89.00£74.17 (ex. VAT)
QUICK VIEW

Steeda Cue ball shift knob

Steeda

Increase the style of your 2015-2017 Mustang GT or EcoBoost interior with Steeda's  6-Speed Black Shift Knob. It will fit directly onto your OE shifter handle in addition to our popular Tri-Ax Short Throw Shifters.These iconic Steeda Cue Balls also fit onto the modern mk3 Focus including ST and RS as well as Fiesta ST as they use the "pull up reverse lockout", so they can also benefit from some Steeda style!Installation is very easy as this Steeda shift knob will only require a few minutes of your time to install.Product BenefitsClassic cue ball designProvides improved grip during shiftingVery easy to installComfortable shifter feelMade in the USAAvailable in Gloss Black or Gloss WhiteLooks great in the cabin!Weighs approx 90gPart:203-E216ULSI20 - Gloss Black203-E226ULSI20 - Gloss WhiteSTEEDA UK TIP!DO NOT over-tighten when installing! Use a lock nut and/or loctite. Over-tightening can (and will) result in a broken shift knob.

£89.74£74.78 (ex. VAT)

Steeda Cue ball shift knob

Increase the style of your 2015-2017 Mustang GT or EcoBoost interior with Steeda's  6-Speed Black Shift Knob. It will fit directly onto your OE shifte...
£89.74
View details
QUICK VIEW

Forge Focus ST / RS short shifter

Forge

Ford Focus ST250 and Focus RS Mk3 Quickshifter and Slop reducing capBuilding on a long line of high-performance Quickshifters from Forge Motorsport. Race inspired shifting for your Focus ST250 and RS Mk3 using your Forge adjustable Quickshifter you can adjust the movement required to select each gear.   In addition this Quickshifter kit comes with a slop reducing cap which when fitted over the shift cable knuckle eliminates movement and gives the shift movement a more direct feel.This kit comes with the Forge Pin removal tool.Click here for installation instructions.

£89.99£74.99 (ex. VAT)
QUICK VIEW

Steeda Focus ST / RS oil separator

Steeda

Excess crankcase pressure (sometimes known as "blow-by") is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This re-circulated air contains aerated oil from the crankcase which is burned by the engine. Supercharged, nitrous boosted and high mileage engines often draw excessive amounts of oil into the engine through the PCV system. The Steeda oil separator plugs into the PCV hose between the PCV valve and the intake manifold and removes aerated oil from the re circulated air and collects it in a tube that can be drained and recycled.Oil separator kits include the oil separator and all required hardware.Product BenefitsIncreased engine component lifeThis kit reduces detonation, oil burning and deposits on the valves by removing oil drawn through the PCV systemSTEEDA UK INSTALL TIP:Check to make sure air flow through the separator is going FROM the valve cover TO the intake tube (arrow on top of oil separator for flow direction ).Fits Vehicle Modelsmk3 Focus ST & Focus RSPart:555-3714 - Pre Facelift  - INSTALL GUIDE555-3717 - Facelift model ST & Focus RS - INSTALL GUIDE - FACELIFT

£94.00£78.33 (ex. VAT)
QUICK VIEW

Steeda Focus ST short shift bracket

Steeda

This extremely durable and high quality bracket mounts to the existing input bracket on top of your Focus ST / RS transmission.The install is very easy and will reduce your shifter throw by 35%.The billet steel construction is fully designed and manufactured in Steeda's manufacturing facility, in the United States. Includes stainless steel hardware for a lifetime of use, without the rust.A must have for any gear-banging enthusiast!Product Benefits Reduces shifter throw by 35%Very high grade billet steel constructionImproved shift feel and accuracyEasy to install by yourselfUsually in stock in the UKInstallation InstructionsDownload the Steeda Focus ST Shifter Bracket installation instructions by CLICKING HERESteeda part: 555-7242Fits Vehicle Models2013+ Ford Focus ST2016+ Ford Focus RSNOTE - ONLY FOR PETROL MODELS

£119.00£99.17 (ex. VAT)
QUICK VIEW

Steeda Focus ST short shifter bracket

Steeda

This extremely durable and high quality bracket mounts to the existing input bracket on top of your Focus ST / RS transmission.The install is very easy and will reduce your shifter throw by 35%.The billet steel construction is fully designed and manufactured in Steeda's manufacturing facility, in the United States. Includes stainless steel hardware for a lifetime of use, without the rust.Product BenefitsReduces shifter throw by 35%Very high grade billet steel constructionImproved shift feel and accuracyEasy to install by yourselfInstallation InstructionsDownload installation instructionsSteeda part: 555-7242Fits Vehicle Models2013+ Ford Focus ST2016+ Ford Focus RSNOTE - ONLY FOR PETROL MODELS

£119.00£99.17 (ex. VAT)
QUICK VIEW

Steeda Focus MK3 hood strit kit

Steeda

Our Steeda Focus Hood Strut Kit comes compete with powder coated strut plates that are rust resistant and require no drilling or modification of your vehicle to install. This kit will install securely using existing bolts in your hood and fender.Steeda's Focus Hood Strut Kit for 2012-2016 Focus including your ST250 or RS installs easily with basic hand tools and eliminates the needs for the pesky hood prop. The hood struts are covered under a 1-year warranty and all the mounting hardware comes with a lifetime warranty.Product BenefitsRequires no drilling or modifications of your carOE quality, tier 1 manufactured gas strutsPowder coated/ Rust resistant strut mount platesEliminates the need for the ugly stock hood propMade in the USAFitment: Suitable for all mk3 Focus - inc ST and RS modelsPart: 555-0686INSTALL GUIDE HERE

£149.00£124.17 (ex. VAT)
QUICK VIEW

Steeda Focus ST / RS rear engine mount

Steeda

Our upgraded mount is designed from 6061 billet aluminium with a choice of different bushings packages to fine tune the level of control and NVH.The soft 70 durometer bushings will greatly increase control over the factory mount while keeping smooth engine/vehicle operation.The stiffer 88 durometer bushings will further increase control but introduce a mild level in vibration and harshness into the vehicle.Our mount is an easy bolt on installation that will noticeably improve launching, power delivery, and shifting feel.Product BenefitsSoft and hard bushing packages for complete controlZinc plated hardwareEasy bolt on installationImproved power delivery and launchingSteeda part: 555-4017Fits Vehicle Models2013+ Ford Focus ST / RS 2007-2013 Mazdspeed 3 (Requires a longer bolt - Not included)

£169.15£140.96 (ex. VAT)£199.00£165.83 (ex. VAT)
QUICK VIEW

Steeda billet rear roll bar mounts for Focus MK3 inc ST RS

Steeda

Our Steeda Billet Aluminum Rear Roll Bar Brackets for 2013-2018 MK3 Ford Focus ST, RS,and other mk3 variants are designed by Steeda to replace the weak rear factory sway bar brackets. Under hard cornering and severe use, the factory brackets become weak when a larger aftermarket rear sway bar is added.These Steeda Billet Aluminum Rear Sway Bar Brackets for 2013-2016 Focus Mk3 are CNC machined from beautiful billet 6061 aluminum, they accept our larger HD rear sway bar for the Focus ST. These brackets come with high-durometer urethane bushings, hardware and grease. These will not flex under hard cornering like a stock stamped steel bracket.Product BenefitsHigh Quality Billet constructionStronger than stamped steel versionsLifetime warrantypart: 555-8145Fitment: MK3 Ford Focus - inc ST and RS

£179.00£149.17 (ex. VAT)
QUICK VIEW

Steeda Focus MK3 inc ST & RS heavy duty braided clutch line

Steeda

Our simple yet effective steel braided clutch fluid line for 2013-2018 MK3 Ford Focus ST/RS will provide increased fluid flow capacity which will improve clutch action and feel. It will also reduce/eliminate clutch pedal sticking during hard driving.Installs easily directly replacing the factory hydraulic line. Includes all fittings and O-rings.Product BenefitsCNC machined OEM style fittingsIncludes fittings and o-ringsImproved Clutch feelEasy installationPart: 555-7017INSTALL GUIDE- CLICK HERE

£179.00£149.17 (ex. VAT)
QUICK VIEW

Steeda Focus RS adjustable roll bar endlinks

Steeda

For street applications these endlinks are as quiet as the factory units. They will not add NVH (noise, vibration, harshness) like rod end units.For competition use our double adjustable design makes it adjustable on the car and allows to both retain proper swaybar geometry on lowered cars and adjust swaybar preload for suspension fine tuning.The adjustment body is constructed from lightweight aerospace grade aluminum and is corrosion resistant. End links feature case hardened ball studs that feature significantly increased swing area compared to spherical rod ends. Includes locking hardware for installation.Product Benefits:As silent as factory units in street useAerospace grade aluminium center adjustersDouble adjustable design for adjustment without removing them from the vehicle

£189.00£157.50 (ex. VAT)
QUICK VIEW

Steeda Focus MK3 rear strut tower brace

Steeda

Steeda's cromoly rear shock tower brace was designed and tested on our own in house Focus ST, and manufactured in our state of the art facility. This brace is manufactured using high strength chro-moly alloy steel tubing making this brace stronger than any mild steel offering. This brace will reduce rear chassis flex from suspension loads during cornering and over rough surfaces improving handling performance and long term chassis longevity.Simple and affordable with the usual fantastic Steeda quality, the perfect addition to your Focus mk3 all the way from 1.0 up to the "full fat" RS!Product BenefitsStiffens rear end of the car, providing a more controllable feelProvides better handlingEasy bolt on installationNote: Fits 2012+ Focus mk3 Hatchback, 2013+ Focus ST and 2016+ Focus RS.MPN: 555-5753INSTALL GUIDE: CLICK HERE

£199.00£165.83 (ex. VAT)
QUICK VIEW

Steeda Focus including Focus ST/RS front rollbar adjustable endlinks

Steeda

For street applications these endlinks are as quiet as the factory units. They will not add NVH like rod end units.For competition uses our double adjustable design makes it adjustable on the car and allows to both retain proper swarbar geometry on lowered cars and adjust swaybar preload for fine tuning.The adjustment body is constructed from lightweight aerospace grade aluminium and is corrosion resistant. End links feature case hardened ball studs that are greaseable and feature significantly increased swing area compared to spherical rod ends. Includes locking hardware for installation.Product BenefitsAs silent as factory units in street use.Aerospace grade aluminum center adjustersDouble adjustable design for adjustment without removing them from the vehicle.More swing area than endlinks with spherical rod endsCase hardened ball studProudly made in the USA!Lifetime warrantySteeda Part :555-1081Fits Vehicle Models2012+ Ford Focus2012+ Ford Focus STFord Focus RS mk3

£239.00£199.17 (ex. VAT)
QUICK VIEW

Steeda Focus RS Anti roll bars

Steeda

Steeda has the track-proven sway bar combinations that will give you reduced body roll, adjustability, and the best handling of any sway bar package on the market. Steeda's MK3 Focus RS front anti roll bar and fixed rate or adjustable rear anti roll bar for 2016-2018 Ford Focus RS mk3 is in-house designed and manufactured to allow for adjustable roll stiffness. This increase in stiffness improves vehicle handling performance by greatly reducing understeer and also reduces overall vehicle body roll.This blue powder coated rear sway bar is 25.4mm in diameter versus 20mm for the stock rear bar. This Steeda sway bar kit includes replacement polyurethane bushings, bushing brackets and installation instructions.Note: This product must be run with 18" or larger wheels.Product Benefits:Adjustable stiffness (adjustable rear bar only)Improves vehicle handlingReduces understeerReduces body rollIncludes bushings and bracketsPart:555-1019 : Steeda Focus RS Rear Sway Bar555-1021 : Steeda Focus RS Front Sway Bar555-1024 : Steeda Focus RS Rear ADJUSTABLE Sway Bar

£269.00£224.17 (ex. VAT)
QUICK VIEW

Steeda Focus ST / RS short shifter

Steeda

Manufactured and designed in house by Steeda's engineering team. 3 position adjustment at the shifter combined with the shifter bracket allows throw reductions of 32, 38, and 44 percent.Our shifter retains the full functionality of the reverse lockout and this kit comes complete with all required hardware and instructions.Product BenefitsAdjustable throw reductionLightweight aluminium constructionImproved shift feel and accuracyFull reverse lockout retentionInstallation InstructionsDownload installation instructionsPart:555-7239  (kit)555-7241 - Shift Lever onlyFits Vehicle Models2013 + Ford Focus ST2016 + Ford Focus RSNOTE: ONLY FOR PETROL MODELS 

£299.00£249.17 (ex. VAT)
QUICK VIEW

Steeda Focus RS cold air intake inlet tube upgrade MK3

Steeda

Manufactured from high quality T-6 aircraft grade United States sourced aluminum, this Intake Tube Upgrade directly replaces the air intake hose between the cold air intake box and the turbo inlet, removing what little restriction is left in the intake system.Comes in a wrinkle black finish with all necessary installation hardware.Product Benefits Direct bolt on replacementUp to 5 more horsepower above what our cold air intake gainsWrinkle black finishFits Vehicle Models: 2016+ Ford Focus RSPart: 555-3216

£299.00£249.17 (ex. VAT)
QUICK VIEW

Steeda Focus ST / RS passenger side engine mount

Steeda

Our mount uses a CNC machined billet aluminum bushing mount which bolts to a 1/4" CNC stamped steel plate making it far stronger than the factory piece. This motor mount will help improve launching by eliminating any deflection which could cause front wheel hop and comes with a lifetime warranty.This mount will increase N.V.H., (noise, vibration, and harmonics) and provides a good, solid link to the transmission and engine and therefore is not recommended for daily street use if smoothness and comfort is a concern to you over max performance. This mount is intended for the most serious enthusiasts who want to get every bit of performance out of their Focus ST or RS.Product BenefitsImproved power delivery and launchingImproved shifting feelDirect bolt on installationLifetime Warranty against manufacturing defectsSelect the relevant PART NUMBER for your vehicle.PART NUMBER:555-4032FITS:Focus ST 2013555-4033FITS:Focus ST 2014 +Focus RS 2016 +

£333.00£277.50 (ex. VAT)