A replacement cork gasket should you need one. These are the gaskets that come with our BOV kits and fits between the boost take-off block.If you are unsure if this product is suitable for your application, please contact us.
£2.20£1.83 (ex. VAT)
Replacement 3.5mm Vacuum Nipple Available in stainless, or anodised black. If you are unsure if this product is suitable for your application, please contact us.
£2.30£1.92 (ex. VAT)
Dump Valve Retaining Cap to be used in older Forge Motorsport valves.If you are unsure if this product is suitable for your application, please contact us.
£6.14£5.12 (ex. VAT)
These are the individual springs sold in our FMTVTUN kit. Please select the colour you require using the options above.Valve Spring Colour Coding: The weakest spring is GREEN, followed by YELLOW, BLUE, and RED which is the strongest. Depending on the supplied original fitment, this represents an increase of 25%, 50%, 75%, and 100% respectively.The standard spring option is for customers who wish to replace a broken idle spring in their twin piston atmospheric dump valve. *The above should only be considered as a guideline*Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this product.
£7.55£6.29 (ex. VAT)
These are the individual springs sold in our FMDVTUN kit. Please select the colour you require using the options above.Valve Spring color coding: Green - 5-15 PSI, Yellow - 15-23 PSI, Blue - 23-30 PSI, Red - 30 + PSI*The above figures are estimates and should only be considered as a guideline*Note: The quoted spring pressure (PSI) relates to the un-assisted clamping force of the spring and should NOT be taken as an equivalent to boost pressure when determining suitability. Once a valve is fitted to a car it is subjected to various pressures that act upon the diaphragm or piston to aid its respective ability to seal or hold boost. An example of this, would be when using a FMCL007P valve on a 1.8T engine as found in the TT 225hp. The boost pressure on a "chipped" car can peak at 26psi. The recommended spring would be the Green or Yellow.Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this product. If you are unsure if this product is suitable for your application, please contact us.
£15.35£12.79 (ex. VAT)
Valve spring for the FMDVRSA/RSR valve.
£15.35£12.79 (ex. VAT)
Available in Plain Alloy or Black.Please Note: There is a drop down menu for either a 25mm or 34mm trumpet.If you have valve part number FMDVSPLTR you will require 25mmIf you have FMBSPLTR then you will require 34mm
£16.94£14.12 (ex. VAT)
A replacement blanking cap for the FMDVSPLTR and FMBSPLTR valves***Please insure you select the correct diameter cap for your valve***If you are unsure please call us on 01452 380999
£17.80£14.83 (ex. VAT)
25mm Side pipe as used on the following valves:FMDV008/PAFMDVSPLTRFMDVPUNT
£17.80£14.83 (ex. VAT)
For info on how to service your valve, click on the 'Instructions' tab above or visit Forge Motorsport guides hereTo order the correct part, you will need to the know the Forge product code of your valve. This will start with 'FM' and will be located on your original purchase receipt, or on the side of the product box. By servicing your valve/adaptor at regular intervals, you can ensure that your Forge Motorsport product will last a lifetime.Each service kit varies depending on which product you need it for: Valve service kits ONLY contain replacement "O" rings, piston, and grease. Blow off adaptor service kits contain ONLY replacement "O" rings and bolts. The splitter valve service kit contains a replacement brass piston and spring. Valves that have O-rings situated on the piston will not come with a piston as the wear is on the O-rings rather than the piston itself.Valve Service Kit Instructions 1Valve Tightening Instructions V3 3Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
£17.99£14.99 (ex. VAT)
32mm Side pipe as used on the following valves:FMBSPLTR
£20.46£17.05 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump / Blow Off Valve Fitting Kit. In The Box:1 x Silicon Straight 1 x 500mm of 4mm Vacuum Hose2 x 35mm Hose Clamp2 x Cable Ties1 x 5mm Plastic T Piece1 x Forge Sticker
£25.99£21.66 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump / Blow Off Valve Fitting Kit. In The Box:1 x Silicon Straight 1 x 2000mm of 4mm Vacuum Hose2 x 35mm Hose Clamp1 x 25mm Blanking Plug6 x Cable Ties1 x 4mm Straight Joiner1 x Forge Sticker
£27.29£22.74 (ex. VAT)
This kit contains a range of springs suitable for tuning many Forge Motorsport products. This kit can also be used in combination with our FMDVTUN spring kit for the tuning of our twin piston atmospheric blow off valves. Four springs are included within the kit.Valve Spring Colour Coding: The weakest spring is GREEN, followed by YELLOW, BLUE, and RED which is the strongest. Depepending on the supplied original fitment, this represents an increase of 25%, 50%, 75%, and 100% respectively.*The above should only be considered as a guideline*Note: Serious or fatal damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of it’s Authorised Distributors can assume any responsibility for any adverse effects resulting from the installation of this product. *Please Note - The colours of the springs illustrated may differ to what you receive. All spring kits are brand new but are not sprayed. Colour is used as an identifier*
£27.55£22.96 (ex. VAT)
These are the individual springs and shims sold in our FMRV2SPK kit for our large blow off valve FMDVRAYV2.Please use the table below to find the part number required and then select it from the drop-down list above. *The picture above illustrates the valve assembly, please note that only one shim can be used and how the shim fits between the piston and the spring*Note: Serious or permanent damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of its Authorised Distributors can assume any responsibility for any adverse effects resulting from the incorrect installation of this product. If you are unsure if this product is suitable for your application, please contact us.
£31.67£26.39 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump / Blow Off Valve Fitting Kit. In The Box:1 x 500mm of 4mm Vacuum Tube2 x 30mm Hose Clamp1 x 35mm Hose Clamp1 x 20mm Blanking Plug2 x Cable Tie1 x Silicon Straight1 x Forge Sticker
£36.84£30.70 (ex. VAT)
An all new one way valve has been designed specifically for vehicles that have supercharger or turbo conversions, with 13mm fittings. It is fitted in line, between the manifold and brake servo, to prevent positive boost pressure entering the brake servo. The brass billet piston and the aluminium billet body means it can withstand over 43 pounds per square inch.This simple affordable solution ensures your brakes will always work and that your brake servo will not be damaged from excessive pressure. In The Box:1 x FMOWV - One Way Valve
£42.29£35.24 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump / Blow Off Valve Fitting Kit. In The Box:1 x Silicon Straight 1 x 1000mm of 4mm Vacuum Hose2 x 35mm Hose Clamp2 x 70mm Hose Clamp6 x Cable Ties1 x 60mm Aluminium T Piece1 x 5mm Plastic T Piece1 x Forge Sticker
£51.18£42.65 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerFiesta RS Turbo Valve Fitting Kit. In The Box:1 x Silicon Straight 1 x 1000mm of 4mm Vacuum Hose2 x 35mm Hose Clamp2 x 70mm Hose Clamp6 x Cable Ties1 x 60mm Aluminium T Piece1 x Forge Sticker
£53.74£44.78 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerFord Escort RS Turbo Dump Valve Fitting Kit. This valve fitting kit can be supplied with either black or blue hoses. Simply select your choice in the options above. In The Box:1 x Silicon Straight Hose1 x 1000mm of 4mm Vacuum Hose1 x 35mm Hose Clamp2 x 60mm Hose Clamp6 x Cable Ties1 x 50mm Aluminium T Piece1 x 5mm Plastic T Piece1 x Forge StickerIf you are unsure if this product is suitable for your application, please contact us.
£53.74£44.78 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump / Blow Off Valve Fitting Kit. In The Box:1 x Silicon Straight 1 x 1000mm of 4mm Vacuum Hose1 x 35mm Hose Clamp2 x 60mm Hose Clamp6 x Cable Ties1 x 50mm Aluminium T Piece1 x 5mm Plastic T Piece1 x Forge Sticker
£53.74£44.78 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump/Blow Off Valve Fitting Kit. In The Box:1 x Silicon Straight 1 x 1000mm of 4mm Vacuum Hose2 x 35mm Hose Clamp2 x 55mm Hose Clamp6 x Cable Ties1 x 40mm Aluminium T Piece1 x 5mm Plastic T Piece1 x Forge Sticker
£58.49£48.74 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump/Blow Off Valve Fitting Kit.In The Box:1 x Silicon Straight 1 x 1000mm of 4mm Vacuum Hose2 x 35mm Hose Clamp2 x 70mm Hose Clamp2 x 25mm Blanking Plug6 x Cable Ties1 x 60mm Aluminium T Piece1 x Forge Sticker
£68.35£56.96 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump / Blow Off Valve Fitting Kit. In The Box:1 x Silicon Straight 1 x 2000mm of 4mm Vacuum Hose2 x 35mm Hose Clamp2 x 60mm Hose Clamp2 x 25mm Blanking Plug6 x Cable Ties1 x 50mm Aluminium T Piece1 x 5mm Plastic T Piece1 x Forge Sticker
£68.68£57.23 (ex. VAT)
This is the complete spring and shim kit for our FMDVRAYV2Consisting of 3 Eibach springs and 4 precision shims allowing you to fine-tune your dump valve from -6 to -12 PSI.*The picture above illustrates the valve assembly, please note that only one shim can be used and how the shim fits between the piston and the spring*Note: Serious or permanent damage may occur to the engine and associated components if this product is incorrectly matched to the individual engine requirements. Forge Motorsport nor any of its Authorised Distributors can assume any responsibility for any adverse effects resulting from the incorrect installation of this product. If you are unsure if this product is suitable for your application, please contact us.
£76.14£63.45 (ex. VAT)
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes soonerDump / Blow Off Valve Fitting Kit
£76.28£63.57 (ex. VAT)