4H-tech MMT6 Short Shifter for MK3 Ford Focus ST250 and Focus RS


4H-tech MMT6 Short Shifter for MK3 Ford Focus ST250 and Focus RS

This 4H-TECH MMT6-Shift is especially designed for the Ford Focus ST from 2012 and younger and also fits the Ford Focus RS 4WD. (mk3)

It makes faster shifting in gears possible. Also known as quick shifter.
By fitting this shift linkage you will have a gear throw shortening of about 25%. This seems not much, but after many test drives and calculations it is the best shortening for the Focus ST and RS.

The factory gear stick model and height remains unchanged. The short shifter will be fitted on top of the gearbox where the shift linkage is located. Fitting is easy and simple. Gear changes are much quicker and precise. One of the must have modifications to your Focus ST and RS!

No Aluminium!

We see that many different types of short shifters are being sold for the Ford Focus ST and RS, and they are all made from Aluminium. Our short shifters are made from high quality steel. Not from Aluminium. Aluminium is not suitable for a good working short shifter. A shifter system needs a counter weight to shift gears smoothly. Aluminium has no weight, so gear changes will get harder that way. Besides the weight advantage is steel much stronger and will last a life time. We design and manufacture short shifters for many car types. We know what we are talking about. Get your car a proper 4H-TECH Short Shifter, the best shifters money can buy!


    Improves performance
    Faster Shifting
    Made in the Netherlands by 4H-TECH
    25% Shortened gear throw
    Easy to install and operate
    Completely reversible to stock
    Made of very high quality steel.
    4H-TECH RED structure powder coating finish
    No modification necessary to the gear stick itself.
    No re-adjustments necessary.
    4H-TECH counter weight system for very easy gear changes.
    Patented Design


    Shift linkage
    Fitting guide
    4H-TECH Sticker


    Ford Focus ST mk3 (2012 -2018 )
    Ford Focus RS mk3 (2016 -2018)

Product Installation Instructions:

    Click Here for Installation Instructions for this Product.
    Spring pin size:  6mm (info when ordering a drift punche tool)

Product Code: ST-Shift
£0.00 (ex. VAT)
£128.28 (ex. VAT)
£0.00 (ex. VAT)
£128.28 (ex. VAT)
Earn 154 reward points

Availability: In stock

Availability: Sorry! We're out of stock

4h-Tech Focus RS Short shifter at MSD

4H-tech MMT6 Short Shifter for MK3 Ford Focus ST250 and Focus RS

Recommend to a friend


Related products

4h-Tech Pin punch tool for Focus Short shifter at MSD

Drift punch tool for spring pins 6mm


Very easy and usefull punch tool which can be used for removing the original shifter arm from the transmission. This tool is not just a punch tool. It has a special tip, which centers into the split pin so you always hit the pin right on it's center.Octagon-shaped body.Zinc-plated finish.Shouldered tip accurately centers into split pins.Hardened to 53 to 58 HRc guaranteeing perfect absorption of the shockwave.Available in 3 different sizes: for 4mm pins, for 5mm pins and for 6mm pinsCheck on the short shifter specific page for chosing the correct pin diameters.

£31.36£26.13 (ex. VAT)
J9 shifter fitment tool at MSD

J9 Roll Pin Removal Tool For Short Shifter Fitment

Made from billet steel to fit perfectly over the OEM Shifter arm and allows you to tighten the bolt into the roll pin to push it through rather than trying to knock it out with a hammer and punch, potentially saving you a lot of time. 

£17.00£14.17 (ex. VAT)