Fits:Focus MK2 RSAs now fitted to our very popular AS Performance manifolds.The original brake servo pipe measures 12.5mm but most upgrade inlet manifolds are fitted with a 12mm push fitting, this make the pipe too tight and nearly impossible to remove, the metal 12.5mm push fitting upgrade fits perfectly and easy to install.Fits most upgraded inlet manifolds, thread is 3/8 bsp.
£9.91£8.26 (ex. VAT)
Chrome bonnet stay top securing clip.This securing clip is normally yellow or black and is located on the underside bonnet, this is where your bonnet stay clips into when it is in the up position.Comes with stainless self-tapper to secure new clip.
£11.02£9.18 (ex. VAT)
Fits:Escort MK3Escort MK4Fiesta MK3Sierra CosworthsSecures bottom of battery.Most Mk3/4 Escorts require 2 clamps to secure battery, one at the front and one on the side of the battery.Comes complete with stainless steel Allen key bolt and washer.
£11.02£9.18 (ex. VAT)
Fits:Escort CosworthFitting: Simply remove electric window switches and boot release switch install new stainless cover then replace switches.
£13.23£11.03 (ex. VAT)
Fits:Sierra Cosworth SapphireTo fit simply sticks over original switch panel,to secure you can use double sided adhesive tape or any other type of adhesive.Please note: switches not included.
£13.23£11.03 (ex. VAT)
Fits:3DR CosworthElectric window switch cover with laser cut RS Cosworth logo.To fit, simply sticks over original switch panel, to secure you can use double sided adhesive tape or any other type of adhesive.Please note: switches not included.
£13.23£11.03 (ex. VAT)
Fits:Focus MK2 ST 2005 > 2008 'Pre Face lift'ST Airflow deflector trim with Airflow logo.Uses original fittings to secure and only takes about 2 minutes to fit!Tip: The Airflow logo is cut out so why not put some thin coloured plastic underneath so it shows through.
£14.89£12.41 (ex. VAT)
Fits:All Cosworths excluding small turbo Escort CosworthsStainless cam cover bolts - set of 20.A easy way to brighten up that boring cam cover or to finish of a refurbished cover.
£15.44£12.87 (ex. VAT)
Is your intercooler looking a bit run down?AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler.Stencils available for all AIRTEC intercoolers.Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1)Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane.Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3)Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.
£15.75£13.13 (ex. VAT)
Fits:Focus MK2 RSThe perfect finishing touch to your Focus RS MK2 - machined finish.Replaces Fords ugly black hexagonal posts with stainless steel polished items, come complete with stainless fittings.Fitting takes only minutes! Designed with a cut out in the posts for a 10mm spanner to neatly fit into the groove, for easy installation.
£16.54£13.78 (ex. VAT)
Fits:Focus MK1 including RSTo fit simply remove power steering cap then install AS power steering reservoir cover.Please note, power steering cap cover not included, available separately.
£16.54£13.78 (ex. VAT)
Fits:Escort Series 1 RS TurboEscort Series 2 RS TurboMade in stainless steel.The original Ford mild steel clamps are often cracked on the edges, this usually is down the age of the clamps and tightening up of the injectors, its worth checking your original clamps to make sure there not broken.Comes with stainless fixings.
£16.54£13.78 (ex. VAT)
Fits:All cosworths apart from small turbo EscortsCosworth Ignition Module Bracket with fittings!3mm thick, fits on to near side inner wing, easy fit and comes with fixings.
£18.19£15.16 (ex. VAT)
Fits: cars running RS500 intercoolerWhen you fit a RS500 style intercooler the mounting points for your amal valve were on the top of your old intercooler, this bracket enables you to re-fit the amal valve securely.This bracket is to be fitted onto the lip of the slam panel. Made from 2mm stainless steel & comes with fittings.
£18.74£15.62 (ex. VAT)
Fits:all Focus MK2 including ST'sSurround has cut out for bonnet ajar switch.Fitting is really simple, remove old bonnet latch bolts fit new stainless latch surround and secure with new stainless bolts provided.
£18.74£15.62 (ex. VAT)
Fits:Focus MK3Surround has cut out for bonnet ajar switchFitting is really simple, remove old bonnet latch bolts fit new stainless latch surround and secure with new stainless bolts provided.
£19.30£16.08 (ex. VAT)
Fits:Focus MK2 ST pre-face lift only 2005 up to 2008Focus ST Turbo Main Air deflector trim - brightens up the front deflector panel.New bolt on version, no sticking or bonding, comes with stainless steel fixings.
£19.30£16.08 (ex. VAT)
Fits:Focus MK1 including ST170 & RSEasy fitting simply sticks onto the black plastic top part of the engine mount, Comes with self adhesive sticky pads.Transforms that boring engine mount.
£19.84£16.53 (ex. VAT)
Fits:2WD CosworthsFuel Pressure regulator securing bracket with RS logo.These are a common problem on 2wd Cosworth's as they are normally broken or missing so we have now made this replacement bracket in mirror finish stainless steel.Polished to a mirror finish.
£19.84£16.53 (ex. VAT)
Fits:Focus MK1 RSPro-Series Satin Black Focus RS cam shaft cover front heat shield trim with HOT logo.Replaces the Ford original heat shield trim, easy to fit and looks great! Fits onto the front of the cam shaft cover, behind the turbo.
£22.05£18.38 (ex. VAT)
High temperature white exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties.To fit simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size'.Wrap up! Heat wrap all those turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!
£22.05£18.38 (ex. VAT)
Fits:all Cosworth modelsCosworth Engine Lifting Eyes - Includes stainless Allen key boltsMade from 3mm stainless steel. Replace those rusty Ford lifting eyes with some new stainless Auto Specialist ones.Plain or RS logo available, polished both sides for that show car finish.Price includes:2 x stainless lifting eyes2 x stainless Allen key bolts & washers.
£22.05£18.38 (ex. VAT)
Fits:Sapphire CosworthSet of 4.You can choose to have all of them plain or go for the logo this option gives you the 2 centre blanks have logo and the 2 outer blanks are plain.Fitting is easy you can use double sided adhesive tape to secure them or many of our customers use our under bonnet plate adhesive to secure.
£22.05£18.38 (ex. VAT)
Fits:Focus MK2 STFocus ST Battery cover top trim with logo, transforms that boring plastic battery cover.This battery top trim fits over original battery cover and is secured by 4 x m5 button head Allen key bolts.Easy fit, takes 5 minutes to fit.Please note: Now comes with 'FST' logo - NOT 'ST Turbo' logo
£24.80£20.67 (ex. VAT)
Fits:Focus ST & all Mk2 models from 2008 on-wardsWing rail covers, fit over existing plastic trims.To fit simply remove black plastic screws with inserts, place new stainless covers on then replace plastic screws & inserts to secure.
£24.80£20.67 (ex. VAT)
Fits:Escort RS Turbo Series 2Helps redirect water away from air filter & alternatorLaser cut to complement the shape of original vents.
£24.80£20.67 (ex. VAT)
Fits:3DR, Sapphire 2WD/4WD & all Escort CosworthsFits next to brake master cylinder reservoir.Takes seconds to fit and looks great, covers up that very boring looking round black abs pump.A excellent finishing touch to any Cosworth
£24.80£20.67 (ex. VAT)
Fits:Focus MK2 RSBattery cover top trim with FRS 'Focus RS' logo.This battery top trim fits over original battery cover and is secured by x4 m5 button head Allen key bolts.Easy fit, takes 5 minutes to fit.Ultimate Green battery cover available separately.
£24.80£20.67 (ex. VAT)
Fits:Sapphire Cosworth 4x4 bonnetsRe-directs water from going directing onto alternator and other major engine components.Laser cut to the shape of original bonnet vents.
£24.80£20.67 (ex. VAT)
Fits:Focus ST & all MK2 models up to 2008Wing rail top covers, fit over existing plastic trims.To fit simply remove black plastic screws with inserts, place new stainless covers on then replace plastic screws & inserts to secure.
£24.80£20.67 (ex. VAT)