COBB Tuning

MSD Etune add-ons

Additional E-Tune revisions

COBB Tuning

E-Tune: Extra revisions:For COBB Accessport owners who have been advised by our calibrator to buy more tuning time.Most of our custom tuning is done remotely on the COBB Accessport platform and all our MSD tunes come with a minimum of 2x custom E-Tunes built into the purchase price and these will normally see the job done perfectly. However, sometimes you want to add more hardware down the line and want us to look at dialling this in for you or have a problem you are trying to overcome and need our guidance via datalogging. This is where you buy the additional E-Tunes needed for those situations.They are priced at only £60 each and for that you will get 1x tuned calibration back from us after sending us your datalogs.Please ensure you are running the correct and latest data-logging instruction sheet by asking us to send you the correct one for the task in hand as we have various forms to suit different tasks. Note:ONLY buy this tuning time If one of our calibrators has specifically advised you to do so.

£120.00£100.00 (ex. VAT)

COBB Ford Stage 1 Power Package Focus RS 2016-2018

COBB Tuning

The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations.Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.The billet aluminum Rear Motor Mount with an 85A durometer bushing cuts down on unnecessary engine movement to reduce wheel hop and increase traction, while minimizing in-cabin NVH.Lastly, COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings!WHY?Combining the world's best selling, most flexible ECU upgrade solution, with a high flow filter to increase air flow and our rear motor mount, COBB brings you the COBB Stage 1 Power Package for your 2016 Ford Focus RS. Start Here down the modifying road with the best bang for your buck by treating your vehicle to parts that will increase your power and improve overall driveability. Nothing but a win/win situation!FEATURESFord Stage 1 Power Package Focus RS 2016-2018Accessport V3High Flow FilterRear Motor MountFORD SPECIFIC FEATURES:COBB Adjustable Traction Control: Adjust target traction slip on the fly (Slots 1-8) and maximize tire grip to best suit given track conditions (wet/damp/dry/street/slip/burnout/etc). Note: Feature must be enabled in ECU calibration for use. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Flat Foot Shift (MT Only): Improve shift times and keep boost built during shifts. Flat Foot Shifting can hold engine RPM at a set RPM between 3000-8000 RPM during shifting. This feature is enabled in COBB OTS maps. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Launch Control: Adjust Launch Control on the fly with 6 pre-configured RPM slots to dial in launch based on track conditions and vehicle configuration. Enabled in OTS Maps and configurable within Accesstuner Pro. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Change Map Slot: Map switching allows for instant changes to several tables inside the vehicles calibration without having to re-flash the ECU! Each "Map Slot" is grouped into a folder found inside the Map Switching Features group. When a map slot is selected by the driver, the ECU will use the corresponding values as defined in each folder. Further Documentation can be found here.

£1,110.90£925.75 (ex. VAT)
COBB Accessport with MSD Etune for Focus RS

MSD E-Tune - Ford Focus RS MK3 (2.3 Ecoboost)

COBB Tuning

The MSD E-TuneThis is a bespoke product for those customers who already own the awesome COBB Accessport V3. We will supply our renowned MSD calibrations as a stand alone purchase via e-mail for self installation onto your vehicle which we can then tune remotely via datalogging should you wish. All our E-Tunes come with a number of built in E-tunes for instant custom tuning.To purchase, simply fill in the form below and head to checkout. We aim to deliver all our E-Tunes the very same business day if ordered before 13:00 GMT. Tunes ordered outside of business hours will be sent out the next working day.Further information is available in the tabs at the bottom:This is a complex product so we have provided much more information in the calibration, driving enhancements, hardware requirements and videos / links tabs further down for those customers who need more info. There is also a link to the dedicated Focus RS MK3 tuning page of our website where you can learn a lot more. 

£199.00£165.83 (ex. VAT)
MSD Focus ST Multimaps Accessport

COBB Accessport V3 - Ford Focus ST 250 (2.0 Ecoboost)

COBB Tuning

The COBB Accessport really is a firm favourite here and not just because it means the end user can install their own calibrations at home, but because the handset transforms the vehicle by adding the option of up to six gauges on screen at any time out of a list of literally hundreds. It also gives you data-logging and diagnostic facilities for reading codes and resetting KAM etc. The Accessport comes with COBB's OTS tunes built in and ready to go. Just choose the one that suits your supporting mods and away you go.But for us, the real power of Accessport comes when you also purchase an MSD Protune to go with it....We utilise the power of Accessport fully to bring you our own tried and tested calibrations that not only retain factory driveability but also bring in some additional awesome features, including the optional MSD Multimaps, which brings the ability to swap between MSD power stages in seconds (EG: Swop between 250, 280 and 300PS, live with the engine still running) using just the vehicles cruise control buttons (See videos tab below) and we also build into every MSD protune a minimum of two custom E-tunes, this means that once you have installed the calibration and got used to the extra power, we will then custom tune your car for you remotely to get the most from your supporting mods and fuel, remotely via emails, at no extra charge!The COBB Accessport and MSD custom tuning are a match made in heaven!MSD Pro-Tunes come as standard with these calibration featuresDIY Install and remove at home.Improved idle stabilityFactory driveability under all conditions.Faster sport mode throttle responseGear based torque targets enhance tractionCoolant temperature based rev limiters enabled.Launch control always active (No menu activation needed)Launch control RPM adjustable via cruise control buttonsBurnout Mode always availableFlat Foot Shifting always availableShift up light activated and enhanced (If eco shift disabled)Shutter grills coded out for safe, error code free removal.All engine protections remain in place.Comes with 2x E-Tune revisions included in the price.New adjustable traction control system available called "MSD-Trac"MSD tunes also come with these personalisation's available:Stop / Start system permanent disable option.Eco shift light permanent disable option.Catalyst Superheat disable options (Decat only) Flat Foot shifting default RPMMSD-Trac system default (On/Off) and default traction levels (1-8)Switchable burbles available at additional cost (Off/quiet/loud)Further information is available in the tabs at the bottom of this page:This is a complex product so we have tried to keep this main section as easy to follow as possible, and provided much more information down in the tabs below called "Power level" "Driving enhancements", "Accessport Features" and "videos / links" tabs further down this page for those customers who need more info. There is also a link to the dedicated Focus ST MK3/3.5 tuning page of our website where you can learn a whole lot more and see videos of customers installing, using and datalogging with these products.A video speaks a thousand words!   Be sure to check out the videos in the tabs down below.        

£793.50£661.25 (ex. VAT)

COBB Ford Stage 1plus Carbon Fiber Power Package Focus RS 2016-20

COBB Tuning

The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.Maintaining the best qualities of the factory intake while improving on the rest, the COBB Carbon Fiber Ford Focus RS Intake is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Fitment verified for left-hand drive vehicles only. The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car, but you will be grinning at every stop light!WHY?Combining the world's best selling, most flexible ECU upgrade solution, with our Carbon Fiber Cold Air Intake System to increase air flow and an upgraded rear motor mount to improve traction, COBB brings you the COBB Stage 1+ Power Package for your Ford Focus RS. Start Here down the modifying road with the best bang for your buck by treating your vehicle to parts that will increase your power and improve overall driveability. Nothing but a win/win situation!FEATURESFord Stage 1+ Carbon Fiber Power Package Focus RS 2016-2018Accessport V3Ford Focus RS Carbon Fiber Cold Air IntakeRear Motor Mount

£1,872.66£1,560.55 (ex. VAT)
MSD Focus RS Multimaps Accessport

COBB Accessport V3 - Ford Focus RS MK3 (2.3 EcoBoost)

COBB Tuning

The COBB Accessport really is a firm favourite here and not just because it means the end user can install their own calibrations at home, but because the handset transforms the vehicle by adding the option of up to six gauges on screen at any time out of a list of literally hundreds. It also gives you data-logging and diagnostic facilities for reading codes and resetting KAM etc. The Accessport comes with COBB's OTS tunes built in and ready to go. Just choose the one that suits your supporting mods and away you go.But for us, the real power of Accessport comes when you also purchase an MSD Protune to go with it....We utilise the power of Accessport fully to bring you our own tried and tested calibrations that not only retain factory driveability but also bring in some additional awesome features, including the optional MSD Multimaps, which brings the ability to swap between MSD power stages in seconds (EG: Swop between 350, 380 and 400PS, live with the engine still running) using just the vehicles cruise control buttons (See videos tab below) and we also build into every MSD protune a minimum of two custom E-tunes, this means that once you have installed the calibration and got used to the extra power, we will then custom tune your car for you remotely to get the most from your supporting mods and fuel, remotely via emails, at no extra charge!The COBB Accessport and MSD custom tuning are a match made in heaven!MSD Pro-Tunes come as standard with these calibration featuresDIY Install and remove at home.Improved idle stabilityFactory driveability under all conditions.Launch control always active (No menu activation needed)Launch control RPM adjustable via cruise control buttonsFlat Foot Shifting always availableRS rev limit warning light strategy enhancedAll engine protections remain in placeComes with 2x E-Tune revisions included in the price.MSD tunes also come with these personalisation's available:Stop / Start system permanent disable option.Eco shift light permanent disable option.Burble tuneable against both normal and sports modes.Burble tuneable against RPM in both modesMultiple burble options such as OFF / Ford / FordSport / MSDEnhanced and MSDExtremeExhaust valve tuning options available. (Closed on cold start etc)Further information is available in the tabs at the bottom of this page:This is a complex product so we have tried to keep this main section as easy to follow as possible, and provided much more information down in the tabs below called "Power level" "Driving enhancements", "Accessport Features" and "videos / links" tabs further down this page for those customers who need more info. There is also a link to the dedicated Focus RS MK3 tuning page of our website where you can learn a whole lot more and see videos of customers installing, using and datalogging with these products.A video speaks a thousand words!  Be sure to check out the videos in the tabs down below.        

£920.46£767.05 (ex. VAT)

COBB Ford Stage 2 Power Package Black Focus RS 2016-2018

COBB Tuning

The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.Maintaining the best qualities of the factory intake while improving on the rest, the COBB Carbon Fiber Ford Focus ST Intake is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Fitment verified for left-hand drive vehicles only.The COBB Front Mount Intercooler (FMIC) + Hard Pipe Kit for your Focus RS is the easiest way to drastically improve power when coupled with tuning from the Accessport. Even when stock, the factory FMIC can be overwhelmed with heatsoak. Testing has proven the COBB intercooler to consistently provide up to 25% more efficient cooling compared to stock with minimal pressure drop despite the much larger core size.The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground.**Also offered with a Silver Intercooler Core**WHY?If you want to get the best overall performance from your Focus RS with simple easy to use bolt-on parts and tuning. The Stage2 package has everything you need all in one place. Plus, every part in the package is over-engineered to be ready to handle even more power with other major modifications down the road.FEATURESFord Stage 2 Power Package Black Focus RS 2016-2018Beautiful Carbon Fiber Intake + High Flow FilterBig 26" x 8.6" x 5" Intercooler Core + 2.5" Aluminum Hard Pipe Kit85A Durometer Rear Motor Mount BushingAccessport V3 including Stage2 OTS Maps ready for plug and play power

£3,554.88£2,962.40 (ex. VAT)

COBB Accessport V3 - Ford Mustang 2.3 EcoBoost

COBB Tuning

Tunes available:(Further custom tuning by E-Mail comes free if required) MSD 320 (430NM / 317+PS)This is a calibration that mimics the vehicles standard power and torque but retains all the awesome COBB Firmware features and MSD's legendary driveability!. This was created specifically for use with MSD Multimaps and is ideal for Multimaps slot 1!MSD 340+ (510NM / 340+PS)This calibration works perfectly on a totally standard car and lifts the power restrictions from within the ECU, further enhancing the power output to 510NM and 340PS.The factory rev limit and all the temperature protection features of the management system are retained, whilst the relevant fuel, spark and load tables are further optimised to achieve this new power output.Rest assured that if your coolant, oil, exhaust or charge temperatures get too high, the ECU will actively lower your available throttle opening and boost pressures as well as add fuel to cool things down until such time as the temperatures are back within safety parameters. Full LSPI / Knock control is retained at factory safety levels. Some tuners remove all this capability in order to achieve their power - Take care out there.MSD360. (550NM / 360PS)Coming Soon...MSD360 is only suitable for vehicles already fitted with the following items:Uprated intercooler 3 Stainless Steel Full Exhaust SystemCatalytic Converter Replacement Pipe / Sports CatPerformance Air Filter and intake kitDenso ITV-22 or NGK LTR7IX-11 Spark PlugMSD 380 MSD 550Further power is available for suitably equipped cars (Forged engine and GTX2867R for example). These tunes can be done remotely but are outside the scope of a simple webshop form. Please contact us for more details.Personalisations Available: (At time of programming)Decat MIL Eliminated (For vehicle with a De-Cat fitted)Eco shift light disable.Shift assist disable.                              All of our Accessport calibrations come with the following awesome feature's enabled:Flat foot shifting:Enabled on all our calibrations, this features allows the accelerator pedal to stay fully depressed while shifting gears. The use of the clutch pedal will still be necessary, but keeping the accelerator pedal fully depressed between shifts allows for the turbo to stay spooled between gears, so you can concentrate on the fastest gearshift and let MSD take care of the engine speed.No hassle launch control:No more entering menus in a hurry! With our calibrations the process of getting into launch mode is simply having the clutch pedal and accelerator pedal depressed fully. The engine speed will quickly raise to the determined RPM set in the calibration file. (Adjustable on request)5-way launch control set-points:This feature enables users to switch between 5 different launch control set points on the fly. You can use the factory cruise control system to switch between different set points.Our calibrations usually have 5 set points enabled from 4500rpm in slot 1 to 5500rpm in slot 5. (Slot choice varies due to other features)Burnout Mode:This feature enables users to perform a nice controlled burnout with a simple button press on the steering wheel. Just hit the button and mash your foot to the floor for an ECU controlled flat foot burnout.Transbrake: (AT vehicles only)Launch control for the auto transmission cars! Engage transbrake and mash the pedal. Just release the brake to launch!! MSD Multimaps: (Optional, at extra cost)A firm favourite... This feature gives you 3 different power levels available at any one time. Imagine having MSD 320 (STD Power with enhanced MSD driveability and all our features), MSD 340, A valet mode and an AntiTheft device, all switchable from the cruise control buttons, even with the engine running. Imagine also being able to dictate which of those power levels the vehicle loaded up with when you turn it on Well you can. Ask us about MSD Multimaps.MSD Custom tuning, remotely!Using the awesome data logging capabilities of the Accessport, we invite you to send us datalogs via E-mail so that we can custom tune your purchased calibration to better suit your own, individual vehicle. After log analysis, we will send you a further optimised tune that is based of feedback from your own vehicle. This feature comes standard with all our tunes for those owners who wish to get involved in some customisation but don't worry, you can enjoy the product forever without getting involved in custom tuning should you wish to.All our calibrations come with full printed instructions further detailing the above features and how to do the datalogging for your custom tuning and the first couple of revisions are included in your purchase price. (We normally only need the two...)(Anti-Theft and Valet modes are now also available on request in slots 4 and 5.)Click here to see some videos of the Accessport in action on our website.(Accessport install / datalogging / gauges / Flat foot shifting / Multimaps etc)Features of the COBB Accessport V3Larger, full colour, higher resolution screenCustomisable multi-gauge displayIn vehicle mount, with on/off switchFaster and easier to use with a familiar faceInterchangeable faceplate'sMPN: C-AP3-FOR-003

£793.50£661.25 (ex. VAT)

COBB Ford Focus ST Stage 1 Power Package

COBB Tuning

Fits:Ford Focus ST (2013-2018)The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings!The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car, but you will be grinning at every stop light!Combining the world's best selling, most flexible ECU upgrade solution, with a high flow filter to increase air flow and an upgraded rear motor mount to improve traction, COBB brings you the COBB Stage 1 Power Package for your 2013+ Ford Focus ST. Start Here down the modifying road with the best bang for your buck by treating your vehicle to parts that will increase your power and improve overall driveability. Nothing but a win/win situation!Ford Focus ST Stage 1 Power Package w/V3Accessport V3High Flow FilterRear Motor MountPeak Increases of ~+7% HP/ +15% TQImprove Traction and Minimize Wheel HopMPN: C-61FX11

£952.20£793.50 (ex. VAT)

COBB Ford Stage 2 Power Package Silver Focus RS 2016-2018

COBB Tuning

The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. Maintaining the best qualities of the factory intake while improving on the rest, the COBB Carbon Fiber Ford Focus ST Intake is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Fitment verified for left-hand drive vehicles only. The COBB Front Mount Intercooler (FMIC) + Hard Pipe Kit for your Focus RS is the easiest way to drastically improve power when coupled with tuning from the Accessport. Even when stock, the factory FMIC can be overwhelmed with heatsoak. Testing has proven the COBB intercooler to consistently provide up to 25% more efficient cooling compared to stock with minimal pressure drop despite the much larger core size. The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. **Also offered with a Black Intercooler Core**WHY?If you want to get the best overall performance from your Focus RS with simple easy to use bolt-on parts and tuning. The Stage2 package has everything you need all in one place. Plus, every part in the package is over-engineered to be ready to handle even more power with other major modifications down the road.FEATURESFord Stage 2 Power Package Silver Focus RS 2016-2018Beautiful Carbon Fiber Intake + High Flow FilterBig 26" x 8.6" x 5" Intercooler Core + 2.5" Aluminum Hard Pipe Kit85A Durometer Rear Motor Mount BushingAccessport V3 including Stage2 OTS Maps ready for plug and play power

£3,554.88£2,962.40 (ex. VAT)

COBB Accessport for Ford Performance EcoBoost ECU

COBB Tuning

Ford Performance Parts offers the high tech 2.0L and 2.3L EcoBoost turbocharged engines as a crate engine kits. The swap possibilities are endless - from early street rods, kit cars, most generations of Mustang, to just about any other vehicle build. Now, you're able to custom tune these Crate Engine Kits with the Accessport!Simple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.WHY?The Accessport is the world's best selling, most flexible, and easiest to use ECU upgrade solution for your M-6017-20T or M-6007-23T EcoBoost Crate Engine Kit. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. This is accomplished via custom tuning with the with the help of a COBB Authorized Protuner using our AccesstunerPro Software. It's the last engine management solution you'll ever need.Note that this Accessport will only work with the Ford Performance M-6017-20T or M-6017-23T ECU that comes with the EcoBoost 2.0L or 2.3L Crate Engine Kit, respectively. Launch Control, Flat Foot Shifting, and Traction Control are not available on this platform due to a lack of clutch and vehicle speed sensor inputs. 5 Way map switching is available for the 2.3L Control Pack ONLY and can only be done through the Accessport due to a lack of cruise control buttons.Read more about this Accessport and our Project Underdog build hereFEATURESAccessport for Ford Performance EcoBoost ECULarge, full color, higher resolution screenCustomizable multi-gauge displayIn vehicle mount, with on/off switchCan be used with Accesstuner (available separately) to create custom tunesInterchangeable faceplates

£714.15£595.13 (ex. VAT)

COBB Ford Stage 1+ Power Package Focus ST 2013-2018

COBB Tuning

The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.Maintaining the best qualities of the factory intake while improving on the rest, the COBB Ford Focus ST Intake is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Fitment verified for left-hand drive vehicles only. The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car, but you will be grinning at every stop light!WHY?Combining the world's best selling, most flexible ECU upgrade solution, with our Cold Air Intake System to increase air flow and an upgraded rear motor mount to improve traction, COBB brings you the COBB Stage 1+ Power Package for your 2013+ Ford Focus ST. Start Here down the modifying road with the best bang for your buck by treating your vehicle to parts that will increase your power and improve overall driveability. Nothing but a win/win situation!FEATURESFord Stage 1+ Power Package Focus ST 2013-2018Accessport V3Ford Focus ST Cold Air IntakeRear Motor MountFORD SPECIFIC FEATURES:COBB Adjustable Traction Control: Adjust target traction slip on the fly (Slots 1-8) and maximize tire grip to best suit given track conditions (wet/damp/dry/street/slip/burnout/etc). Note: Feature must be enabled in ECU calibration for use. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Flat Foot Shift (MT Only): Improve shift times and keep boost built during shifts. Flat Foot Shifting can hold engine RPM at a set RPM between 3000-8000 RPM during shifting. This feature is enabled in COBB OTS maps. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Launch Control: Adjust Launch Control on the fly with 6 pre-configured RPM slots to dial in launch based on track conditions and vehicle configuration. Enabled in OTS Maps and configurable within Accesstuner Pro. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Change Map Slot: Map switching allows for instant changes to several tables inside the vehicles calibration without having to re-flash the ECU! Each "Map Slot" is grouped into a folder found inside the Map Switching Features group. When a map slot is selected by the driver, the ECU will use the corresponding values as defined in each folder. Further Documentation can be found here.COBB Burnout Mode: Enabled in OTS (Off the Shelf Maps) This feature allows you to hold the car at a predetermined RPM and perform a burnout. Burnout mode prevents you from over revving the engine while performing a burnout! (Fiesta ST, Focus ST & Mustang Only.) 

£1,364.82£1,137.35 (ex. VAT)

COBB Ford Stage 1+ Carbon Fiber Power Package Focus ST 2013-2018

COBB Tuning

The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.Maintaining the best qualities of the factory intake while improving on the rest, the COBB Carbon Fiber Ford Focus ST Intake is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Fitment verified for left-hand drive vehicles only. The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car, but you will be grinning at every stop light!WHY?Combining the world's best selling, most flexible ECU upgrade solution, with our Carbon Fiber Cold Air Intake System to increase air flow and an upgraded rear motor mount to improve traction, COBB brings you the COBB Stage 1+ Power Package for your 2013+ Ford Focus ST. Start Here down the modifying road with the best bang for your buck by treating your vehicle to parts that will increase your power and improve overall driveability. Nothing but a win/win situation!FEATURESFord Stage 1 + Carbon Fiber Power Package Focus ST 2013-2018Accessport V3Ford Focus ST Carbon Fiber Cold Air IntakeRear Motor MountFORD SPECIFIC FEATURES:COBB Adjustable Traction Control: Adjust target traction slip on the fly (Slots 1-8) and maximize tire grip to best suit given track conditions (wet/damp/dry/street/slip/burnout/etc). Note: Feature must be enabled in ECU calibration for use. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Flat Foot Shift (MT Only): Improve shift times and keep boost built during shifts. Flat Foot Shifting can hold engine RPM at a set RPM between 3000-8000 RPM during shifting. This feature is enabled in COBB OTS maps. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Launch Control: Adjust Launch Control on the fly with 6 pre-configured RPM slots to dial in launch based on track conditions and vehicle configuration. Enabled in OTS Maps and configurable within Accesstuner Pro. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Change Map Slot: Map switching allows for instant changes to several tables inside the vehicles calibration without having to re-flash the ECU! Each "Map Slot" is grouped into a folder found inside the Map Switching Features group. When a map slot is selected by the driver, the ECU will use the corresponding values as defined in each folder. Further Documentation can be found here.COBB Burnout Mode: Enabled in OTS (Off the Shelf Maps) This feature allows you to hold the car at a predetermined RPM and perform a burnout. Burnout mode prevents you from over revving the engine while performing a burnout! (Fiesta ST, Focus ST & Mustang Only.)

£1,745.70£1,454.75 (ex. VAT)

COBB Ford Focus ST Stage 2 Power Package

COBB Tuning

Fits:Focus ST (2013-2018)The Stage 2 Power Package for the Ford Focus ST is the best second level for the Ecoboost powered vehicle. During extensive testing, COBB engineers found that heat, not necessarily airflow, was the biggest restriction to power on the platform. As such, they married a Front Mount Intercooler which is 57% larger to a 3" mandrel bent cold air intake. This setup cools temps as much as 100 degrees, and produces significant power increases. Everything is tuned right out of the box with the Accessport and pre-installed maps.The ultimate package in Focus ST modifications. Aggressive, yet safe calibration using the Accessport. Consistent power delivery from cooler charge air temperatures. Enhanced sensory feedback from the turbo and bypass valve through the intake.Ford Stage 2 Power Package Focus ST 2013-2018Accessport V3Front Mount IntercoolerIntake SystemRear Motor MountGains of 14% HP and 15% LB-FT on 93 octane

£2,834.30£2,361.92 (ex. VAT)

COBB Ford Stage 2 Carbon Fiber Power Package Focus ST 2013-2018

COBB Tuning

The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.Maintaining the best qualities of the factory intake while improving on the rest, the COBB Carbon Fiber Ford Focus ST Intake is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Fitment verified for left-hand drive vehicles only. The COBB Front Mount Intercooler (FMIC) for your Focus ST is the easiest way to drastically improve power when coupled with tuning from the Accessport. Even when stock, the factory FMIC can be overwhelmed with heatsoak. By using a 57% larger core with streamlined piping, your Focus ST will come alive with charge air thats up to 100 DEGREES COOLER.The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground.WHY?The ultimate package in Focus ST modifications! Aggressive, yet safe calibration using the Accessport. Consistent power delivery from cooler charge air temperatures. Enhanced sensory feedback from the turbo and bypass valve through the intake. Intake fitment verified for left-hand drive vehicles only.FEATURESFord Stage 2 Carbon Fiber Power Package Focus ST 2013-2018Accessport V3Front Mount IntercoolerCarbon Fiber Intake SystemRear Motor MountCOBB Vehicle BadgeFORD SPECIFIC FEATURES:COBB Adjustable Traction Control: Adjust target traction slip on the fly (Slots 1-8) and maximize tire grip to best suit given track conditions (wet/damp/dry/street/slip/burnout/etc). Note: Feature must be enabled in ECU calibration for use. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Flat Foot Shift (MT Only): Improve shift times and keep boost built during shifts. Flat Foot Shifting can hold engine RPM at a set RPM between 3000-8000 RPM during shifting. This feature is enabled in COBB OTS maps. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Launch Control: Adjust Launch Control on the fly with 6 pre-configured RPM slots to dial in launch based on track conditions and vehicle configuration. Enabled in OTS Maps and configurable within Accesstuner Pro. (Fiesta ST, Focus ST, Focus RS & Mustang Only.)COBB Change Map Slot: Map switching allows for instant changes to several tables inside the vehicles calibration without having to re-flash the ECU! Each "Map Slot" is grouped into a folder found inside the Map Switching Features group. When a map slot is selected by the driver, the ECU will use the corresponding values as defined in each folder. Further Documentation can be found here.COBB Burnout Mode: Enabled in OTS (Off the Shelf Maps) This feature allows you to hold the car at a predetermined RPM and perform a burnout. Burnout mode prevents you from over revving the engine while performing a burnout! (Fiesta ST, Focus ST & Mustang Only.)

£3,110.52£2,592.10 (ex. VAT)

COBB Ford Stage 1 Drivetrain Package (Exterior) Focus ST/RS MK3 2012-2018

COBB Tuning

The Stage 1 Drivetrain Package Includes: Adjustable Shift Plate, Shifter Cable Bracket Bushings, Shifter Cable Bushings.WHY?Get the ultimate shift upgrade for your Focus ST or RS! Bushings provide firmer shifts while the adjustable shift plate allows your preference of a 20%, 30%, or 40% throw reduction.FEATURESFord Stage 1 Drivetrain Package (Exterior) Focus ST 2013-2018, Focus RS 2016-2018Ford Adjustable Shift PlateFord Shifter Cable Bracket BushingsFord Shift Cable Bushings

£222.18£185.15 (ex. VAT)

COBB Ford Stage 1+ Drivetrain Package (Exterior & Interior) Focus ST/RS Mk3 2012-2018

COBB Tuning

The Stage 1+ Drivetrain Package Includes: Adjustable Shift Plate, Shifter Cable Bracket Bushings, Shifter Cable Bushings and the COBB Knob. Please Specify in order notes which colour COBB KnobWHY?Get the ultimate shift upgrade for your Focus ST or RS! The bushings provide firmer shifts while the adjustable shift plate allows your preference of a 20%, 30%, or 40% throw reduction. The Stage 1+ Drivetrain Package tops it off with the COBB Knob giving your hand the job of a lifetime!FEATURESFord Stage 1+ Drivetrain Package (Exterior, Interior) Focus ST 2013-2018, Focus RS 2016-2018Ford Adjustable Shift PlateFord Shifter Cable Bracket BushingsFord Shift Cable BushingsFord Shift Knob

£317.40£264.50 (ex. VAT)

COBB 3" Cat-Back Exhaust - Mazdaspeed3 GEN1 SS

COBB Tuning

The COBB Tuning Gen1 MAZDASPEED3 Cat-Back is constructed purely from 304 Stainless Steel. The system starts with a stock donut-style flange that mounts to the OEM down pipe or any stock-replacement down pipe, such as the COBB Tuning 3" Down pipe. Next up is a polished resonator section with attractive rolled end-cap, followed by a polished low-restriction straight-through muffler section, also with this attractive rolled end-caps. A thick stainless-steel 2-bolt flange connects to the final section of the exhaust that ends in a tasteful, slash-cut 3.5" double wall tip featuring an etched COBB logo. This COBB Tuning exhaust system conforms to the SAE dictated 95-decibel exhaust noise level limit enforced by California, as well as other states in the US.The COBB 3" SS Cat back Exhaust was engineered specifically to match the performance needs of the 2007-2009 MAZDASPEED3. The attention to detail that goes into the fabrication of this cat back makes it a shame to hide it underneath the car. Manufactured using mandrel-bent T304 stainless steel with a custom resonator and high-flow muffler for optimal performance and reliability. Its factory-like fit, attractive finish and subtle yet deep exhaust note put it safely 11 dB below the SAE J1169 limit.304 Stainless Steel for Corrosion ResistanceTIG Welded ThroughoutPolished 4" TipImpressive SoundWithin SAE J1169 Sound RestrictionsMPN: C-571100

£856.98£714.15 (ex. VAT)

COBB 3" Turboback Exhaust - Mazdaspeed3 GEN1 SS

COBB Tuning

The COBB Tuning Turbo back exhaust is the ultimate power bundle for your 1st Gen MAZDASPEED3! Simple plug-in and bolt-on installation of these components offer excellent power gains, outstanding build quality and an impressive exhaust note. The Turbo back exhaust includes: COBB 3" SS Down pipe - Cast bellmouth and high-flow catalytic converter for optimal exhaust flow; COBB 3" SS Cat back Exhaust - Beautiful fabrication and awesome exhaust note. Click on the links or tabs for Down pipe and Cat back to learn more about each product included in the Turbo back exhaust. Stage 2 requires an upgraded Cam Shaft Driven Fuel Pump (CDFP)The COBB 3" SS Turbo back Exhaust is engineered specifically to match the performance needs of the 2007-2009 MAZDASPEED3. An exceptionally well designed system, fabricated from quality materials with precision standards. The high flow catalytic converter and mufflers offer optimal performance gains, tasteful looks, and unparalleled durability with a mellow exhaust tone. Constructed as a direct fit replacement makes installation a breeze. Simply bolt the system on and enjoy the power and sound!CAD Designed Cast Turbo Outlet for Maximum Flow200 Cell High Flow Catalytic Converter304 Stainless Steel for Corrosion ResistancePolished 4" TipWithin SAE J1169 Sound RestrictionsCOBB Installation Guides & Manuals COBB Mazda Exhaust 571301 Installation InstructionsMPN: C-571301

£1,840.92£1,534.10 (ex. VAT)

COBB Accessport for Porsche 718 Cayman / Boxster

COBB Tuning

The in-cabin mountable Accessport V3 has a large, full color, high resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.WHY?The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Porsche. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.CLICK HERE FOR MAP NOTES, DYNO CHARTS AND POWER GAINSFEATURESAccessport for Porsche 718 Cayman / BoxsterLarger, full color, higher resolution screenCustomizable multi-gauge displayIn vehicle mount, with on/off switchUser-Customizable Start Up ScreenInterchangeable faceplates      

£2,063.10£1,719.25 (ex. VAT)

COBB Accessport for Porsche 911 991.2 Carrera / S / GTS

COBB Tuning

The in-cabin mountable Accessport V3 has a large, full color, high resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.WHY?The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Porsche. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.CLICK HERE FOR MAP NOTES, DYNO CHARTS AND POWER GAINSFEATURESAccessport for Porsche 911 991.2 Carrera / S / GTSLarger, full color, higher resolution screenCustomizable multi-gauge displayIn vehicle mount, with on/off switchUser-Customizable Start Up ScreenInterchangeable faceplates

£2,317.02£1,930.85 (ex. VAT)

COBB Accessport for Porsche 911 991.2 Turbo / Turbo S / GT2 RS

COBB Tuning

The in-cabin mountable Accessport V3 has a large, full color, high resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.WHY?The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Porsche. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.CLICK HERE FOR MAP NOTES, DYNO CHARTS AND POWER GAINSFEATURESAccessport for Porsche 911 991.2 Turbo / Turbo S / GT2 RSLarger, full color, higher resolution screenCustomizable multi-gauge displayIn vehicle mount, with on/off switchUser-Customizable Start Up ScreenInterchangeable faceplates

£3,332.70£2,777.25 (ex. VAT)

COBB Accessport for Porsche 981 Cayman, Boxster / 991.1 Carrera

COBB Tuning

Throw away your gauges!! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.WHY?The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Porsche. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need.CLICK HERE FOR MAP NOTES, DYNO CHARTS AND POWER GAINSFEATURESAccessport for Porsche 981 Cayman, Boxster / 991.1 CarreraLarger, full color, higher resolution screenCustomizable multi-gauge displayIn vehicle mount, with on/off switchUser-Customizable Start Up ScreenInterchangeable faceplates

£1,809.18£1,507.65 (ex. VAT)

COBB Accessport for Porsche 987.2 Cayman, Boxster / 997.2 Carrera

COBB Tuning

Throw away your gauges!! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Note: Support not available for Base Cayman/Boxter/Carrera at this time.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.

£1,301.34£1,084.45 (ex. VAT)

COBB Accessport for Porsche 991.1 Turbo

COBB Tuning

Throw away your gauges!! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.

£3,078.78£2,565.65 (ex. VAT)

COBB Accessport for Porsche 996 Turbo

COBB Tuning

Throw away your gauges!! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.

£1,301.34£1,084.45 (ex. VAT)

COBB Accessport for Porsche 997.1 GT3 / GT3 RS

COBB Tuning

Throw away your gauges!! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.

£1,301.34£1,084.45 (ex. VAT)

COBB Accessport for Porsche 997.2 GT3 / GT3 RS

COBB Tuning

Throw away your gauges!! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from 1,000s of standard vehicle mounts). Of course, all of the great COBB tuning is included - with enough space for 100 calibrations. This is your new Accessport - and maybe the last one you'll ever need.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.

£1,428.30£1,190.25 (ex. VAT)

COBB Accessport for Volkswagen (Mk7/Mk7.5) Golf R, Audi S3 (8V)

COBB Tuning

Simple ECU flashing with gauge package! The in-cabin mountable Accessport V3 has a large, full color, high resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs. This is your new Accessport.Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions.

£767.05£639.21 (ex. VAT)

Recently Viewed

No items found.