Bosch

QUICK VIEW

Genuine Bosch fuel filter F5021

Bosch

Fuel Filters are used to help protect the engine. This is done by filtering out foreign particles that may damage a fuel injector. A damaged fuel filter can result in erratic performance, poor mph and in some cases it can cause complete engine shutdown. Even the smallest of particles can cause a considerable amount of wear and tear to an engine. By protecting the fuel system and the engine from these harmful particles can help prolong the life of your vehicle.

£15.00£12.50 (ex. VAT)
QUICK VIEW

BOSCH Universal Lambda Sensor LS02 0258986502

Bosch

BOSCH Universal Lambda Sensor 0258986502Lambda sensors are subject to extreme conditions. A properly functioning lambda sensor forms the basis for reliable engine operation and thus fuel economy, low pollutant emissions, and good exhaust gas values.Bosch lambda sensors are available for most vehicles. They are unbeatable thanks to their long service life, excellent operation, and optimum engine compatibility. They make a significant contribution to saving the driver money and protecting the environment.Bosch invented the lambda sensor and is first choice for lambda sensors around the world. An annual production of around 45 million lambda sensors impressively demonstrates the high production expertise delivered by Bosch. It therefore comes as no surprise that most vehicle manufacturers put their trust in Bosch lambda sensors.

£58.50£48.75 (ex. VAT)
QUICK VIEW

Bosch 1000cc 95lb Fuel Injector (Uses EV1 Connectors)

Bosch

1 x Bosch 1000cc 95lb Fuel Injector7 point Multi Hole High Impedance injectors.This is a high performance, high volume racing fuel injector.The fuel delivery is from a 7-hole disc, incorporating a spray pattern for maximum fuel atomisation for modern single-valve and multi-valve engines.All New Generation Bosch fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.Will maintain consistency to a minimum pulse width of only 1.5 ms.Excellent low pulse width response with predictable response down to 2ms.Excellent atomisation for modern multi-valve engines.Body Design: EV14, connector EV1, Composite plastic w/internal filterInjector type: Saturated 12.5ohm High Impedance.Fuel Nozzle: 7-hole disc - max atomisationFlow rates: (All tests conducted using the industry standard Heptane).    1000 cc/min, 95 lbs/hr at 43.5 psi. (3.0 bar) - FORD SPECIFIC 80% DUTY CYCLE    Genuine UK Sourced Bosch Motorsport Injectors 1000cc / 95lb.hr beware of cheap copies.The optional Height Adaptor is  for Bosch 2/3rd size Fuel Injector (Bosch Multi Hole) Made for fitting the latest design 6/7 hole EV6 Bosch injectors to older style engines. 

£98.00£81.67 (ex. VAT)
QUICK VIEW

Bosch 205 Fuel Pump - replacement for the Bosch 941

Bosch

.This pump is an high flow external gravity fed unit and is intended for use below fuel tanks.It flows enough fuel for in excess of 380BHP on a Cosworth or most other vehicles running 5.5 bar or less of fuel pressure at peak power.Key Points:This is a genuine Bosch pump.This item comes in full retail packaging. Beware of pumps that do not.The price stated here is for the fuel pump ONLY. We are not fitting it for you at this price, although fitment is of course available by us if required. For further details please call us on 01253 508400.

£175.00£145.83 (ex. VAT)
Bosch 044 at MSD
QUICK VIEW

Bosch 200 Fuel Pump - replacement for the Bosch 044

Bosch

The new genuine Bosch replacement for the classic Bosch 044!This fuel pump flows about 15% more and weighs about 15% less than the old 044 pump. This fuel pump is also made to handle Ethanol (up to E85) better unlike the old -044 pump.This is a direct replacement for those of you who want to replace an old -044 pump with something better.Details:- >275l/h @ 5bar- Supercedes the 0 580 254 044- Flows ~10% higher than 044 at 7bar- Weighs 15% less than 044 at 860g- Current draw similar to 044- M18x1.5 inlet fitting and M12x1.5 outlet fitting- External non return valve- Pressure relief valve 8-10bar- Not suitable for voltage regulation- Compatible with Gasoline and Diesel 

£195.00£162.50 (ex. VAT)
QUICK VIEW

Escort RS Turbo MFI S1 & S2 Bosch Injectors x 4

Bosch

Set of 4 x Brand New Bosch KE Fuel Injectors as fitted to all Series 1 & 2 Ford Escort RS Turbos.These injectors are brand new in the boxes.These are genuine Bosch parts - NOT cheap copies. 

£196.52£163.77 (ex. VAT)
QUICK VIEW

Bosch 550cc Multihole Injectors - Set of Five

Bosch

Fits:Focus MK2 STFocus MK2 RSSet of 5 genuine Bosch multi hole injectors, perfect for RS owners looking for 350bhp to 385bhp.These injectors are able to function at high fuel pressures and don't exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors.Many tuners push these injectors to 6 bar and higher. Engine performance and running quality are enhanced through the optimized spray pattern.Unlike single hole high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.Features:547cc/min = 374g/min = 50lb/hr @ 3barDual cone sprayStandard body lengthRegular tip nozzle12 ohm resistanceUSCAR connectorE85 compatible

£225.00£187.50 (ex. VAT)
QUICK VIEW

Focus RS MK2 440cc multi hole injectors

Bosch

These are the same Bosch injectors as found in the Focus RS MK2 and are a direct replacement for the standard 330cc Focus ST injectors.Direct Fitment in Place of the original Ford Focus ST 225 InjectorsOriginal Ford / Volvo spray pattern characteristicsExcellent response characteristics from the multi-hole designHigh Impedance compatibility with all stock Ford/Volvo/Bosch ECUBetter fuel economy than the single-hole disc 'custom machined' types.

£360.00£300.00 (ex. VAT)
QUICK VIEW

Bosch 750cc Multihole Injectors - Set of Five

Bosch

Fits:Focus MK2 STFocus MK2 RSSet of 5 Bosch Multi hole injectors, perfect for RS owners looking for 400bhp - 500bhp+.These injectors are able to function at high fuel pressures and don't exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors.Many tuners push these injectors to 6 bar and higher.Engine performance and running quality are enhanced through the optimised spray pattern. Unlike single hole high flow injectors, these high flow injectors utilise a multi-orifice tip for improved mixture preparation and atomisation.This results in lower BSFC and better idle quality than many injectors with less flow.Features: GenuineReliable Bosch injectorsExcellent response characteristicsRobust DesignLow impedance performance characteristics with high impedance compatibility

£479.95£399.96 (ex. VAT)
QUICK VIEW

Bosch 1000cc Injectors - Set of Five

Bosch

Fits:Focus RS MK2RS Owners looking for 500BHP+Features:GenuineReliable Bosch InjectorsExcellent response characteristicsRobust Design  Low impedance performance characteristics with high impedance compatibility

£495.95£413.29 (ex. VAT)
QUICK VIEW

Bosch 650cc Multihole Injectors - Set of Five

Bosch

Fits:Focus MK2 ST & RSSet of 5.The newest injector from Bosch with their latest technology, multi spray angle but has 24 very small holes 12 on each side.Features:GenuineReliable Bosch injectorsExcellent response characteristicsRobust designLow Impedance performance characteristics with high impedance compatibilityRS owners looking for 385bhp +

£509.30£424.42 (ex. VAT)
MSD-Focus-RS-Uprated-HPFP-Bosch-1
QUICK VIEW

Ford Focus RS 2.3 Uprated Bosch High Pressure Fuel Pump (HPFP)

Bosch

Bosch High Pressure Fuel Pump Upgrade for the Focus RS MK3.Genuine Bosch Component.Modified correctly to make it a direct bolt on.MSD unique loom to make it plug and play with no wiring alterations to your car.35% Higher flow than standard to support 580BHP on pump fuel.Fitted with brand new O-ring.This is a tried and tested Bosch high pressure fuel pump for the Focus RS Mk3 that is compatible with our own tunes such as MSD480 and MSD530. It is a direct replacement unit that can provide the extra flow and pressure required to make increased horsepower and torque safely.We have also developed a special wiring harness that makes this a plug and play solution that does not require any wiring modifications, meaning you can re-fit the old, original Ford pump again should you wish to.This pump is fully compatible with the stock ECU and injectors and will start and run fine straight out of the box.Note:This pump is proven to work perfectly with high power conversions up to 580PS with the relevant tune adjustments and bolt-ons.

£949.00£790.83 (ex. VAT)

Recently Viewed

No items found.